• 한국소음진동공학회논문집
• /
• 제22권5호
• /
• pp.407-412
• /
• 2012

The dynamic instability and natural frequency of an axially moving pipe conveying fluid are investigated. Thus, the effects of fluid velocity and moving speed on the stability of the system are studied. The governing equation of motion of the moving pipe conveying fluid is derived from the extended Hamilton's principle. The eigenvalues are investigated for the pipe system via the Galerkin method under the simple support boundary. Numerical examples show the effects of the fluid velocity and moving speed on the stability of system. Moreover, the lowest critical moving speeds for the simply supported ends have been presented.

• 기계저널
• /
• 제42권4호
• /
• pp.42-45
• /
• 2002

이 글에서는 카오스의 이론적인 관점에서 성공적이라 할 수 있는 3차원 유동의 적용 예 중에서 산업적으로 관심의 대상이 될 수 있는 파이프 유동에서의 혼합증진, 혼합탱크 내의 혼합증진, 단축압출기에서의 혼합증진, 그리고 마이크로 채널 유동에서의 혼합증진 등 네 가지 유동에 대해 소개하도록 한다.

• 한국소음진동공학회논문집
• /
• 제11권8호
• /
• pp.314-321
• /
• 2001

Static and oscillatory loss of stability of composite pipes conveying fluid is Investigated. The theory of than walled beams is applied and transverse shear. rotary inertia, primary and secondary warping effects are incorporated. The governing equations and the associated boundary conditions are derived through Hamilton's variational principle. The governing equations and the associated boundary conditions are transformed to an eigenvlaue problem which provides the Information about the dynamic characteristics of the system. Numerical analysis is performed by using extended Gelerkin method. Variation of critical velocity of fluid with fiber angles and mass patios of fluid to pipe Including fluid is investigated.

• 소음진동
• /
• 제10권2호
• /
• pp.280-290
• /
• 2000

The paper deals with vibration suppression and dynamic stability of a vertical cantilevered pipe conveying an internal flowing fluid and having an attached mass. Real pipe systems may have some valves or mechanical attached parts, which can be regarded as attached lumped masses. The effect of attached mass on the dynamic stability of a cantilevered pipe conveying fluid is investigated for different locations and magnitudes of the attached mass. The flow rate was controlled through motor pump output and measured by a flow meter. Experimental resutls in the vicinity of flutter fluid velocity were compared with theoretical predictions. It has been found that the experimental results are in substantial agreement with the theoretical predictions. Finally, in order to suppress the vibration of the pipe subjected to a disturbance, and control technique using an internal flowing fluid is introduced.

• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.28-38
• /
• 2011

Large eddy simulation(LES) of fully developed turbulent pipe flow has been performed to investigate the effect of Reynolds number on the flow field at $Re_{\tau}$=180, 395, 590 based on friction velocity and pipe radius. A dynamic subgrid-scale model for the turbulent subgrid-scale stresses was employed to close the governing equations. The mean flow properties, mean velocity profiles and turbulent intensities obtained from the present LES are in good agreement with the previous numerical and experimental results currently available. The Reynolds number effects were observed in the mean velocity profile, root-mean-square of velocity fluctuations, Reynolds shear stress and turbulent viscosity.

• 한국전산유체공학회지
• /
• 제16권4호
• /
• pp.100-109
• /
• 2011

Large eddy simulation(LES) of fully developed turbulent pipe flow has been performed to investigate the effect of Reynolds number on the flow field at $Re_{\tau}$=180, 395, 590 based on friction velocity and pipe radius. A dynamic subgrid-scale model for the turbulent subgrid-scale stresses was employed to close the governing equations. The mean flow properties, mean velocity profiles and turbulent intensities obtained from the present LES are in good agreement with the previous numerical and experimental results currently available. The Reynolds number effects were observed in the higher-order statistics(Skewness and Flatness factor). Furthermore, the budgets of the Reynolds stresses and turbulent kinetic energy were computed and analyzed to elucidate the effect of Reynolds number on the turbulent structures.

• 한국소음진동공학회논문집
• /
• 제19권6호
• /
• pp.569-574
• /
• 2009

The paper presents the influences of the external damping and the tip mass on dynamic stability of a vertical cantilevered pipe conveying fluid. In general, real pipe systems may have some valves and attached mechanical parts, which can be regarded as attached lumped masses and support-dampers. The support-dampers can be assumed as viscous dampers. The equations of motion are derived by energy expressions using extended Hamilton's principle, and some numerical results using Galerkin's method are presented. Critical flow velocities and stability maps of the pipe with external dampers and tip mass are obtained for various tip mass ratios, external damping coefficients and positions of the viscous dampers.

• 에너지공학
• /
• 제7권1호
• /
• pp.44-56
• /
• 1998

분리형 히트파이프식 열교환기는 증발기와 응축기를 폐열원과 열풍이 필요한 곳에 분리설치하고 증기 및 액체의 연락관으로 두 열교환기를 연결하여 하나의 폐루프를 구성하고 증발기와 응축기의 설치 높이차에 의해 작동이 이루어지는 것이다. 따라서 고온 및 저온유체의 병류 및 향류의 혼합배치가 용이하다는 장점이 있으나, 고온유체의 온도가 높을 경우에는 포화증기의 압력이 높아져 파이프가 견딜 수 있는 사용한계를 초과하게 될 수 있다. 또한 너무 낮으면 증기의 비체적증가와 함께 유속의 증가로 압력손실이 커져 설치높이차를 크게 하던지 증기연락관의 직경을 크게 하여야 하는 문제가 발생할 수 있다. 따라서 설계과정에서 고온유체 및 저온유체의 온도, 유량 등이 정하여진 상태에서 병류 및 향류로 배치하는 경우에 분리형 히트파이프식 열교환기를 Lmtd방법으로 설계하고, 고온 및 저온유체의 온도 및 유량이 실제 운전과정에서 변화가능한 범위에 대해 Ntu 방법으로 열교환량,포화증기압력 및 압력손실에 따른 증발기와 응축기의 설치높이차 등에 대한 가동특성을 고찰하였다.

• 한국가스학회:학술대회논문집
• /
• 한국가스학회 1997년도 추계학술발표회 논문집
• /
• pp.266-273
• /
• 1997

• 대한기계학회논문집B
• /
• 제39권7호
• /
• pp.599-607
• /
• 2015

본 연구에서는 나노유체의 유동학 특성을 반영한 히트파이프 열적특성을 연구하였다. $Al_2O_3$와 CuO 나노입자를 적용한 나노유체를 작동유체로 하여 나노입자 부피비와 응집도에 대한 히트파이프 성능을 확인하였다. 나노입자의 부피비와 응집도가 증가할수록 점성과 열전도도는 증가하는 것으로 나타났으며 두 인자는 히트파이프 성능에 영향을 주었다. 나노입자응집이 없는 경우에는 나노입자의 부피비 증가가 모세관압력한계 성능을 향상시켰지만 응집도가 증가하면 입자부피비가 증가해도 모세관압력한계가 감소했다. 그리고 나노입자의 열전도도, 부피비, 응집도에 대한 히트파이프 열저항을 분석하였다. 히트파이프의 투과율이 높을수록 최대열수송량은 입자부피비에 미치는 영향이 컸으며 3차원 그래프를 통해 윅 특성에 대한 최적화된 나노입자부피비를 확인하였다.