• Clean Technology
• /
• v.25 no.4
• /
• pp.283-288
• /
• 2019

Monodisperse microparticles has been particularly enabling for various applications in the encapsulation and delivery of pharmaceutical agents. The microfluidic devices are attractive candidates to produce highly uniform droplets that serve as templates to form monodisperse microparticles. The microfluidic devices that have micro-scale channel allow precise control of the balance between surface tension and viscous forces in two-phase flows. One of its essential abilities is to generate highly monodisperse droplets. In this paper, a microfluidic approach for preparing monodisperse polycaprolactone (PCL) microparticles is presented. The microfluidic devices that have a flow-focusing generator are manufactured by soft-lithography using polydimethylsiloxane (PDMS). The crucial factors in the droplet generation are the controllability of size and monodispersity of the microdroplets. For this, the volumetric flow rates of the dispersed phase of oil solution and the continuous phase of water to generate monodisperse droplets are optimized. As a result, the optimal flow condition for droplet dripping region that is able to generate uniform droplet is found. Furthermore, the droplets containing PCL polymer by solvent evaporation after collection of droplet from device is solidified to generate the microparticle. The particle size can be controlled by tuning the flow rate and the size of the microchannel. The monodispersity of the PCL particles is measured by a coefficient of variation (CV) below 5%.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.23 no.5
• /
• pp.566-573
• /
• 2017

The chine of high speed vessels does not only play a role in changing position when planing but also helps balancing the hull. It also has a great influence on resistance performance. However, designing a chine requires a lot of experience because it is influenced by various factors such as displacement, transom shape, draft and width. Such a design is not based on an empirical formula, but the purpose of this study is to provide basic guidelines regarding the shape of chine through calculation. This design was developed using Yacht-one, a commercial design program, and analysis was performed using Star-CCM+, also a commercial analysis program. Analysis of the hull selected in this study was carried out by Dynamic Fluid Body Interaction (DFBI) method. Analysis of the chine was carried out at chine angles of 15, 16, 17, and 19degrees, at a speed of 30knots. The result indicated that the highest trim occurred at 16 degrees among the four chine angles considered, and the highest heave occurred at 15degree. In terms of resistance performance, minimum resistance was observed at 16 degrees. Consequently, for minimum ship resistance, it is necessary to complete calculations in accordance with the chine angles, ${\pm}2$ degrees from the initial chine angle, which should be carried out a the design stage.

• Journal of Korean Society of Forest Science
• /
• v.88 no.1
• /
• pp.38-46
• /
• 1999

Canopy structure conductances of a Norway spruce forest in the Solling Hills(Central Germany) and Central Forest Biosphere Reserve(320km to the north-west from Moscow) were derived from LE(latent heat flux) and H(sensible heat flux) fluxes measured(by Eddy correlation technique and energy balance method) and modelled(by one dimensional non-steady-state) SVAT(soil-vegetation-atmosphere-transfer) model(SLODSVAT) using a rearranged Penman-Monteith equation("Big-leaf" approximation) during June 1996. They were compared with canopy stomatal conductances estimated by consecutive intergrating the stomatal conductance of individual needles over the whole canopy("bottom-up" approach) using SLODSVAT model. The result indicate a significant difference between the canopy surface conductances derived from measured and modelled fluxes("top-down" approach) and the stomatal conductances modelled by the SLODSVAT("bottom-up" approach). This difference was influenced by some nonphysiological factors within the forest canopy(e.g. aerodynamic and boundary layer resistances, radiation budget, evapotranspiration from the forest understorey). In general, canopy surface conductances derived from measured and modelled fluxes exceeded canopy stomatal conductance during the whole modelled period, The contribution of the understorey's evapotranspiration to the total forest evapotranspiration was small (up to 5-9% of the total LE flux) and was not depended on total radiation balance of forest canopy. Ignoring contribution of the understorey's evapotranspiration resulted in an overestimation of the canopy surface conductance for a spruce forest up to 2mm/s(about 10-15%).

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.6
• /
• pp.31-38
• /
• 2005

Aerodynamic influence coefficient linearly relates pressure with downwash in panel method for load analysis in which the viscosity of a flow is ignored and the compressibility cannot be taken into account in transonic region. Since the planform of an aerodynamic surface determines the coefficient, the panel method has a limit to the analysis of low Reynolds number flow. The accuracy of the pressure distribution can be improved by a direct correction to the pressure or a correction to the downwash, which is considered the change of camber or thickness, using the aerodynamic coefficients from wind tunnel test as constraints. A premultiplying correction method as well as a postmultiplying correction method is applied to a micro air vehicle to provide more accurate aerodynamic pressure for trim and load analyses. Theoretical aerodynamic pressure is obtained from the panel method. Correction factor matrix and correct pressure coefficient are computed for the conditions with two constraints in addition to single constraint. The postmultiplying correction method gives a better improvement in pressure distribution on micro air vehicle due to the flow characteristics on it.

• Journal of Korean Society of Rural Planning
• /
• v.21 no.2
• /
• pp.91-102
• /
• 2015

한국은 2050년까지 주요 선진국 중에서 고령화가 가장 심각한 사회로 전환되게 될 것으로 예상된다. 기대여명의 증가와 저 출산은 고령화를 더욱 악화시키며, 이는 심각한 사회문제로 발전하게 될 것이다. 이와 같은 문제를 해결하기 위해 한국정부는 2008년에 도시지역에는 주택연금제도를 도입하였으며, 2011년에는 세계 최초로 농촌지역을 대상으로 농지연금제도를 도입하였다. 그렇지만 이와 같은 제도는 설계 당시부터 복지상품이라기 보다는 장기적으로 손실과 수익의 균형에 초점을 둔 금융상품으로 개발되어 실질적으로 노인들에게 크게 인기를 얻지 못하였다. 따라서 본 연구는 농지연금제도를 활성화시켜, 농촌노인들에게 보다 더 많은 혜택을 주기 위해 지역 토지시장을 감안하여 지역별 농지가격상승률을 예측하고 연금액을 산출하였다. 또, 지금까지 사용한 년 혹은 분기별 감정가 대신에 월별, 지역별 실거래 가격을 모형에 적용하여 지역토지시장, 고령화 수준 등 지역 여건에 부합하는 연금액을 산출하였다. 할인율자료도 가장 안정적인 3년 만기 국고채 수익률을 활용하여 미래농지가격을 예측하고, 이를 유동화하여 월 생활자금으로 지급되도록 하였다. 특히 농지규모가 가장 많고, 고령화 정도가 심각하여 농지연금의 잠재적 수요가 가장 높을 것으로 예상되는 경상북도와 전라남도를 사례지역으로 선정하고, 이를 전국평균과 비교하여 지역적인 차이도 함께 분석하였다. 이를 위해 농지가격 및 이자율 시계열 자료의 안정성을 검정하고, 장기농지가격을 예측하였다. 이를 활용하여 경북, 전남, 전국의 노인들의 월평균 지급액을 추정하였다. 분석결과 정책의 잠재적 수요가 가장 높은 두 지역이 가장 낮은 금액이 지급되는 것으로 추정되어 이는 또 다른 지역불균형을 초래할 수 있는 것으로 평가되었다.

• Korean Journal of Social Welfare
• /
• v.63 no.4
• /
• pp.277-299
• /
• 2011

The current study analyzed the tax structure in the welfare states. The appropriate tax structure of universal welfare state should be based on expanding all taxes, rather than choosing between direct and indirect, progressive and regressive, or mobile and immobile tax. The revenue for the universal welfare payment should be raised by levying tax on all people provided that the welfare payment is made available to all people. The analysis led to classification of tax structure into the high tax European model and the low tax English and East Asian model. The high tax European model was further classified into the balance tax model and the high social security model. The low tax English and East Asian model was classified into the low social security model and the high property tax model. Based on the results, the study maintained that the universal welfare states need not only to expand welfare resources but to develop tax system that corresponds to the universal welfare system.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.26 no.1
• /
• pp.16-22
• /
• 2016

The research on two-wheeled inverted pendulum (TWIP) mobile robots has been ongoing in a number of robotic laboratories around the world. In this paper, we consider a robust controller design for the TWIP mobile robot driving on uniform slopes. We use a 2 degree-of-freedom (DOF) model which is obtained by restricting the spinning motion in a 3 DOF motion dynamic equation. In order to design the robust controller guaranteeing stability of the TWIP mobile robot driving on inclined surface, we propose a sliding mode control based on the theory of variable structure systems and design a sliding surface using the theory of the linear quadratic regulation (LQR). For simulation, the dynamic model of the TWIP mobile robot is constructed using Mathworks' Simulink and the sliding mode control is also implemented using Simulink. From simulation results, we show that the proposed controller effectively controls the TWIP mobile robot driving on slopes.

• Economic and Environmental Geology
• /
• v.41 no.1
• /
• pp.151-163
• /
• 2008

Since the country's opening to the world, China's rapid economic growth has resulted in strong demand for a wide variety of mineral commodities. During the same period, China's mineral production increased sharply. China's increased mineral production and demand affected the worldwide availability of minerals and metals, the market prices, and trade. Ministry of Land and Resources of China (MLR) planned to build as many as 10 strategic mineral reserve, including reserves of aluminium, copper, manganese, uranium, and other mineral that the country urgently needed. In white paper of China's mineral resources, China is planning the mineral resources conservation and its reasonable utilization, domestic supply increase of resources, activation of cooperative development with foreign partners, balance in resources development and environment conservation, and sustainable resources management as the mineral resources policies for the China's economic development.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.3
• /
• pp.1003-1010
• /
• 2013

In this study, a simulation program was developed, which predicts the performance of cold-air forced circulation type air cooled showcase. The showcase has an excellent display effect in addition to preserving the grocery. In the program, the compressor was analyzed using performance data supplied by the manufacturer and the capillary tube pressure drop was analyzed using a homogeneous model. The evaporator and condenser were analyzed by dividing the heat exchangers into small elements, where energy balance and appropriate heat transfer correlations were used. A showcase model with two 3/4 HP compressors, capillary tubes of 1.6 mm inner diameter, a fin-and-tube evaporator and condenser was tested, and the results are compared with the predicted values. It is shown that both evaporation and condensation temperatures are adequately predicted by the program.

• KIPS Transactions on Software and Data Engineering
• /
• v.12 no.6
• /
• pp.243-250
• /
• 2023

Chest X-ray is radiological examination for xeamining the lungs and haert, and is particularly widely used for diagnosing lung disease. Since the quality of these chest X-rays can affect the doctor's diagnosis, the process of evaluating the quality must necessarily go through. This process can involve the subjectivity of radiologists and is manual, so it takes a lot of time and csot. Therefore, in this paper, based on the chest X-ray quality assessment guidelines used in clinical settings, we propose a tool that automates the five quality assessments of artificial shadow, coverage, patient posture, inspiratory level, and permeability. The proposed tool reduces the time and cost required for quality judgment, and can be further utilized in the pre-processing process of selecting high-quality learning data for the development of a learning model for diagnosing chest lesions.