• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.70-75
• /
• 2018

The mounted store on an aircraft shall be subjected to an ground separation test to verify that a safe separation has been made before it is actually installed to the aircraft. In this study, ground ejection test was conducted with dummy missile to verify the stability of the drop on the land. Bomb rack unit essential to testing ground ejection test, operate at high pressure and produce a significant ejection force to push the missile away from any large orifice. Bomb rack unit modified their bombe pressure and orifice diameter to photograph the drop movement of dummy missile with high-speed camera and to analyze their drop displacement and speed. It is considered useful to provide the initial data for the ejection force analysis on aircraft with actual flight and to carry out the ground separation tests of aircraft with future developments.

• Journal of Advanced Navigation Technology
• /
• v.25 no.3
• /
• pp.217-222
• /
• 2021

EOTS(Electro-Optical Tracking System) is utilized in acquiring visual information to assess a guided missile's performance. As the missile travels so fast, it is almost impossible for operator to re-capture the lost target. The RADAR or telemetry data are used to re-capture the lost target however facilities to receive real time data is required, which constrains selection of tracking site. Unlike aforementioned data, pre-calculated nominal trajectory can be used without communication facility. This paper proposes a method to predict lost target's state by employing nominal trajectory. Firstly, observed trajectory and nominal trajectory are compared using DTW and current target's state is predicted. The predicted state is used as observation in Kalman filter's correction phase to predict target's next state. The plausibility of the proposed method is verified by applying on actual missile trajectory.

• Journal of Advanced Navigation Technology
• /
• v.26 no.6
• /
• pp.456-463
• /
• 2022

The SAM(Surface-to-Air Missile) systems will be operated until disposing of it after production, the necessary test and evaluation should be performed during the development stage to ensure the operational performance after deployment. As development of technologies related to the electromagnetic wave field of missile system is required, so the verification of the electromagnetic environment has become more important. Therefore it is necessary to carefully review whether there are any weaknesses through the analysis of the SAM system when establishing the test and evaluation procedure. This paper describes the general electromagnetic test procedure for SAM system and discusses the matters that need to be supplemented. Also, methods for supplementation and review results were written.

• Defense and Technology
• /
• no.10 s.152
• /
• pp.58-63
• /
• 1991

유도무기의 개발에서 관성유도에 필요한 관성합법장치 기술의 확보는 필수적이다. 관성항법장치의 핵심부품이 되는 자이로 기술 및 발전추세에 대해서는 국내 학술회의에서 최근에 발표된바 있으므로, 이글에서는 국내의 관성항법장치 연구개발에 관심이 있는 관계자가 관성항법장치 기술을 개괄적으로 이해하는데 도움이되도록 꾸며 보았다. 이에따라 관성항법장치 시스템에 대한 기본 원리, 하드웨어 설계제작 및 시험 평가 소요 기술, 그리고 관성항법장치의 유도탄 응용현황 및 발전 추세 등을 개략적으로 기술하였다. 이어 국내의 관성항법장치 보유 기술 및 추후 연구 개발이 필요한 기술에 대해 덧붙였음을 알린다

• 한국생물공학회:학술대회논문집
• /
• 2003.04a
• /
• pp.676-679
• /
• 2003

Long time over 6 month was required to form granuler sludge, which is critically necessary for UASB reactor. By feeding both high molecular cationic polymer and anionic silica sol to conventional digestion sludge, granular sludge was obtained within 5 minutes. Succession adaptation was performed for granular sludge for 30 days. $80{\sim}90%$ COD removal efficiency was shown with granular sludge, which was comparable with that of typical UASB granular sludge.

• Journal of the Korean Society of Systems Engineering
• /
• v.7 no.1
• /
• pp.23-30
• /
• 2011

본 논문은 대형복합 시스템인 국방 유도무기체계를 MBSE(Model Based Systems Engineering) 방법론에 적용한 사례 연구에 대하여 다룬다. MBSE 방법론 적용을 위해 시스템 엔지니어링 설계 프로세스를 적용한다. 이를 통해 MBSE 방법론 적용의 유용성을 공유하고, MBSE 적용 지침으로 활용될 수 있도록 한다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.343-346
• /
• 2006

In this study, optimization process is constructed for developing missile MDO framework. The analysis tools which are integrated in the missile MDO framework and data flow between analysis tools are investigated. Using analyzed results, the optimal design scenario is constructed. Then to verify optimal design scenario, missile design problem is made and performed.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.515-518
• /
• 2010

This technical paper presents future missile trends and propulsion technologies necessary for the missiles. The views are based on open literature briefings of the United States and internet informations. These informations let domestic incorporations prepare technologies for the future. Political and economical environment has been changing worldwidely. More extensive role is required for the incorporations to increase the economic growth of our country. The incorporations should establish the long term product development strategy of their own to compete with foreign countries.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.11a
• /
• pp.439-441
• /
• 2008

Three dimensional CFD study has been performed for analyzing the supersonic plume exhausting from the eject motor of a guided missile. The purpose of the study is to assess the impact of the plume to the shooter in a small bunker. The main body of the present paper is the development of a numerical method including grid generation and solver schemes.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.9
• /
• pp.721-727
• /
• 2021

In this paper, aerodynamic characteristics of missile configuration with various grid fins in subsonic flow. To investigate the effects of grid fin shape, four types of experimental models were used. In addition, to examine aerodynamic characteristics of missile configurations with various grid fins according to effects of Reynolds numbers and configurations of grid fins, 6-components aerodynamic forces and moments were measured by internal balance in wind tunnel test.