• Title/Summary/Keyword: 유도성 결합

Search Result 849, Processing Time 0.032 seconds

Design of X band Microstrip Directional Couplers (X-대역 마이크로 스트? 방향성 결합기의 설계)

  • 양인응;홍완희
    • Journal of the Korean Institute of Telematics and Electronics
    • /
    • v.12 no.4
    • /
    • pp.7-14
    • /
    • 1975
  • A significant new technique in the dsvelopment of micro-wave circuits is the process of untilization of coupled lines in the transverse electro-magnetic field. The bases for this technique are the application of even-and odd-mode characteristic impedances of the transmission line. This article describes the properties of directional couplers and explains a prccfdure usrd to design micro-strip directional couplers with the aid of the computer. The article also describes the experimental results obtained from seven microstrip couplers, which were built to verify the computer program and the approximate solutions. It can be seen that in cases at X-band where couplings of 10 to 20dB are required, the computer program and approximate solutions will produce good results.

  • PDF

유리기판의 광추출 효율 향상을 위한 마스크 제작 공정 없는 플라즈마 식각 연구

  • Seo, Dong-Wan;Gwon, O-Hyeong;Lee, U-Hyeon;Kim, Ji-Won;Hwang, Gi-Ung
    • Proceedings of the Korean Vacuum Society Conference
    • /
    • 2013.02a
    • /
    • pp.507-507
    • /
    • 2013
  • 유리기판으로 투과되는 빛들 중에는 내부 전반사나 wave-guided mode로 인하여 손실이 일어나 일반적으로 20%의 광추출 효율을 가진다. 이러한 문제점을 해결하기 위한 연구에는 Photonic Crystal과 같은 주기적인 나노 구조물이 있는데 이러한 구조물을 제작하기 위한 마스크 공정 과정은 대부분 복잡하거나 비싼 단점이 있다. 이에 본 발표에서는 마스크 없이 비정질소다라임 유리의 구조물 생성으로 광 추출 효율이 상승하는지 보고자 하였다. M-ICP (Magnetized-Induced Coupled Plasma)란 용량 결합형 플라즈마와 유도 결합형 플라즈마 두 가지 방식의 플라즈마를 이용한 것인데 용량 결합형 플라즈마를 이용해 이온이 sheath에 의해 가속되어 유리표면에 부딪히고 그에 따라 유리가 식각되는 물리적 식각을 이용하였다. 또한 이온의 밀도를 조절하기 위해 유도결합형 플라즈마 방식을 이용하여 식각률을 높였다. 화학적 식각을 위해서는 CF4와 O2혼합 가스를 이용해 F가 Si와 결합하여 SiF4가 되어 사라지고 탄소잔여물인 C는 O2와 반응하여 제거하였다. 그 결과, 랜덤한 분포를 가지는 미세한 구조물(stochastic sub-wavelength structure)을 유리 표면에 형성할 수 있었고, 또한 다양한 가스 종류와 압력, source power와 bias power, 그리고 시간을 바꿔가며 미세 구조물들을 관찰하였다. 실험 결과, 가시광선 파장 이하의 높이를 갖고 수 마이크로미터의 너비를 갖는 구조물이 전반사되는 빛을 효율적으로 추출하는 것을 산란되는 빛의 정도인 diffusive transmittance 가 기존 0%에서 15% 정도로 증가하는 것으로 스펙트로포토미터 측정을 통해 확인하였다. 이러한 유리 기판 위 구조물 생성방법을 OLED에 적용한다면 적은 비용으로 소자의 효율을 크게 향상 시킬 수 있을 것이다. 또한 본 처리 과정의 장점은 기존의 방법에 필요한 스퍼터링이나 RTA 처리 과정이 필요 없어 공정 단가 절감과 제조 공정의 단순화로 높은 생산성을 얻을 수 있으며 대면적화에도 유리하다.

  • PDF

Compact Tri-Band Bandpass Filter Using Dual-Mode Stepped-Impedance Resonators and Parallel Coupled-Lines (이중 모드 SIR과 평행 결합선로를 이용한 소형 3중-대역 대역통과 필터 설계)

  • Gyuje Sung;Young Kim
    • Journal of Advanced Navigation Technology
    • /
    • v.27 no.1
    • /
    • pp.57-62
    • /
    • 2023
  • This paper proposes a tri-band bandpass filter using dual-mode stepped-impedance resonators (SIRs) with parallel coupled structures. The proposed filter adopts U-shaped SIRs with open stubs and parallel coupled lines (PCLs) that have inter-digital and comb-line shorted ends. Two U-shaped SIRs with open stubs build the first and third passband, and the central PCL resonators build the second passband. Five resonators and coupling structures are theoretically analyzed to derive the scattering parameters of the proposed filter. A novel tri-band bandpass filter is designed and fabricated using the induced scattering parameters. The measured result of the fabricated tri-band bandpass filter shows a good agreement with the simulated one.

인공치아와 표면처리

  • Choe, Han-Cheol
    • Proceedings of the Korean Institute of Surface Engineering Conference
    • /
    • 2016.11a
    • /
    • pp.121-121
    • /
    • 2016
  • 치아는 인체중에서도 혹한 환경에서 부분으로 높은 하중과 타액과 같은 강 부식성 매체로 그 환경이 상상을 초월한다. 즉 반복적으로 가해지는 하중(응력)과 침식을 유발하는 타액과 음식물 등이다. 따라서 치아가 쉽게 파괴되거나 썩는 현상이 나타나게 된다. 이렇게 사용되다가 치아의 역할을 다하게 되면 인공치아를 사용하게 되는데 그 재료가 바로 타이타늄(Ti)이다. 생체매식재로 사용되는 Ti는 반응성이 높아 산소와 쉽게 결합하여 표면에 TiO, $TiO_2$, 및 $Ti_2O_3$와 같은 산화피막을 표면에 형성함으로써 뛰어난 부식저항성과 생체적합성을 가지며 생체에 독성이 없고 탄성계수가 골과 비슷하여 골과 임플란트 경계면에서 응력분산에 유리한 성질 등 물리적, 기계적 성질이 뛰어나 외과용 임플란트 재료로 가장 좋은 재료이다. 금속 임플란트의 생체적합도는 임플란트 재료 자체보다는 생체 내 산화막이 화학적으로 불안정할 때 부식이 발생하게 되고 그 결과 금속이온이 주위로 유리되어 조직반응을 일으키므로 금속의 표면을 덮고 있는 산화막에 의해 좌우된다. Ti는 생체불활성재료로서 매식재료로 사용할 경우 뼈와 잘 융합되는 골유착을 나타내나 골과 화학적결합은 하지 않고 골형성을 적극적으로 유도하지 못함으로 환자의 치유기간이 길어지게 된다. 이러한 이유로 골조직내 임플란트의 접합을 개선하기위한 연구가 이루어져 골과의 결합을 높이기 위해 골유착을 일으키는 Ti에 골성장을 유도하는 뼈성분인 하이드록시 아파타이트(HA)라는 물질을 플라즈마 코팅법을 사용하던가 아니면 Hanks' solution내에서 침적 후 HA도금을 하는 방법 등으로 처리하고 있다. 그러나 플라즈마 코팅법은 고온에서 처리를 행하고 Hanks' solution내에 침적할 경우 Ti표면에 밀착도가 저하되거나 합금의 상변화 등으로 인하여 표면처리 과정 중에서 내식성이 크게 감소될 수 있다. 이러한 여러 가지 코팅법을 통하여 골 유착을 증진시키기 위한 연구는 계속되고 있지만 임상적으로 사용 후 문제가 단시일에 발생되는 것도 아니고 수년이 지나야 나타나게 된다. 이러한 방법으로 코팅을 하게 되면 골과 잘 유착이 되어 자연차아와 같은 기능을 하게 된다. 따라서 이러한 문제를 최소화하는 방법이 나노구조를 표면에 형성시켜 골유착을 쉽게 함으로써 이를 개선할 수 있을 것으로 생각되어 본 강의에서는 임플란트의 문제와 사용되는 재료에 대하여 고찰하여 자연치아를 대체 할 수 있는지 알아보았다.

  • PDF

A Study on the Synthesis of Eugenolchitosan and Safrolechitosan (Eugenol과 safrole을 부가한 chitosan 유도체 합성)

  • Kim, Je-Jung;Jung, Byung-Ok;Chang, Pahn-Shick;Park, Dong-Ki
    • Korean Journal of Food Science and Technology
    • /
    • v.36 no.3
    • /
    • pp.398-402
    • /
    • 2004
  • Safrolechitosan (SaCs) and eugenolchitosan (EuCs) were synthesized and characterized to increase water solubility and functionality of chitosan. Product impurities were removed by Soxhlet apparatus using methanol to obtain final product with high purity. Using Ubbelohde viscometer, molecular weights of chitosan, EuCs, and SaCs were determined as $1.2{\times}10^{5}\;Da,\;7.8{\times}10^{5},\;and\;7.5{\times}10^{5}\;Da,\;respectively$. IR spectrum of SaCs revealed chemical shift of amide II band ($1,553cm^{-1}$) of chitosan grafted by safrole caused by generation of covalent bond between primary amino of chitosan and double bond of safrole. Due to graft reaction of safrole onto chitosan, vinyl bands ($1,611\;and\;1,442cm^{-1}$) of safrole disappeared. In graft reaction of eugenol onto chitosan, shift of amide II band ($1,553cm^{-1}$) and disappearance of vinyl band were observed. On $^{1}H-NMR$ spectrum of EuCs, $H_{2}C=CH-$ peak in eugenol (monomer) disappeared, whereas $-H_{2}C-CH_{2}-$ peak appeared. Above results indicate safrole and eugenol were successfully grafted onto chitosan.

The Effect of High Molecular Hyaluronic Acid on Bone Formation in Human Fetal Osteoblasts (사람 태아 골모세포에서 고분자 히알루론산의 골형성 유도에 관한 연구)

  • Lee, Kwang-Soo;Kim, Hyun-A;Kim, Yun-Sang;You, Hyung-Keun;Shin, Hyung-Shik
    • Journal of Periodontal and Implant Science
    • /
    • v.32 no.3
    • /
    • pp.589-602
    • /
    • 2002
  • Hyaluronic acid (HA)는 중요한 glycosaminoglycan 중 하나로서 단백질과 화학적 결합을 하지 않기 때문에 분리가 쉽고 결합조직의 세포간 기질의 주요 성분이다. 우리는 점탄성 고분자 hyaluronic acid를 실험실상에서 사람 태아 골모세포의 골 형성 과정에 미치는 영향을 알아보고자 하였다. 우리는 여러 농도의 HA에 대한 사람 태아 골모세포에서의 세포증식, 염기성 인산분해효소 활성, 석회화 결절 형성능, 교원질 합성능 그리고 bone sialoprotein (BSP)의 발현 정도를 검사하였다. 세포증식에서 각 농도의 HA 처리군과 대조군 간에 2일과 4일간의 결과에서 유의한 차이를 보이지 않았다. 염기성 인산분해효소 활성에서는 0.063% HA 처리군에서 음성 대조군에 비해 가장 유의한 염기성 인산분해효소 활성을 보였다 (p<0.05). 0.063% HA 처리군은 교원질 합성능에서도 가장 높은 수준을 보였다 (p<0.05). 석회화 결절 형성능에서는 0.063% HA 처리군에서 대조군에 비해 많은 염색된 석회화 결절을 보였다. BSP의 발현 정도를 분석한 Western blot에서는 대조군에 비해 0.063% HA 처리군에서 증가된 단백질 발현을 나타났다. 본 연구 결과 고분자 HA가 실험실상에서 사람 태아 골모세포의 분화를 통해 새로운 골 형성을 유도할 수 있는 능력이 있음을 시사하였다.

에틸렌-아크릴산 공중합체/폴리에틸렌글리콜 블렌드의 상용성 연구: Ferric Chloride 첨가효과

  • 이준열;유희진
    • Proceedings of the Korean Fiber Society Conference
    • /
    • 1998.04a
    • /
    • pp.58-62
    • /
    • 1998
  • 고분자 블렌드의 열역학적 상용성은 고분자 혼합물의 혼합 엔트로피가 무시할 수 있을 정도로 작기 때문에 성분 고분자 사이의 강한 분자간 인력에 의한 음의 값의 혼합 엔탈피에 의해서 유도되어진다. 상용성 고분자 블렌드를 얻기 위하여 도입되어질 수 있는 분자간 상호인력으로는 수소결합$^1$, 쌍극자-쌍극자 상호작용$^2$, 이온-쌍극자 상호작용$^3$, 산-염기 상호작용$^4$, 전이금속 복합체 형성$^{5}$ , 전하이동 복합체 형성$^{6}$ 등이다.(중략)

  • PDF

항공기 시스템 및 항공전자 장비의 낙뢰 간접영향에 대한 감항성 인증

  • Han, Sang-Ho
    • Aerospace Engineering and Technology
    • /
    • v.4 no.1
    • /
    • pp.247-259
    • /
    • 2005
  • The interactions of natural atmospheric electricity with aircraft reveals many flight safety problems. It is estimated that on average, each commercial airplane is struck by lightning more than once each year. Thus the lightning strike to aircarft poses an appreciable threat to flight safety. Upset or damage of electrical and electronics equipment by the induced voltages is defined as indirect effect. The protection of aircraft electronics from the indirect effects of lightning can be accomplished first by determining the specific threats to the aircraft and systems contained within, and second, by designing protection methods to the aircraft components.

  • PDF

The Search of Pig Pheromonal Odorants for Biostimulation Control System Technologies: Ⅱ. Holographic QSAR Model for Binding Affinities between Ligands of Volatile Odorants Molecules and Porcine Odorant Binding Protein (pOBP) (생물학적 자극 통제 수단으로 활용하기 위한 돼지 페로몬성 냄새 물질의 탐색: Ⅱ. 휘발성 냄새분자의 리간드와 Porcine Odorant Binding Protein (pOBP) 사이의 결합 친화력에 관한 홀로그래피적 QSAR 모델)

  • Sung N. D.;Park C. S.;Choi Y. S.;Myung P. K.
    • Reproductive and Developmental Biology
    • /
    • v.29 no.1
    • /
    • pp.43-48
    • /
    • 2005
  • To search of a new porcine pheromonal odorants for biostimulation control system technologies to offer a potentially useful and practical way to improve reproductive efficiency in livestock species, the holographic quantitative structure activity relationship (HQSAR) model between odorants, 2-phenoxytetrahydrofurane (A), 2-cyclohexyl-oxytetrahydrofurane (B), derivatives and binding affinity constants (p[Od.]/sub 50/) for porcine odorant-binding protein (pOBP) as receptor of pig pheromones were derivated and disscused. The binding affinity constants of cyclohexyl substituents (A) for pOBP were higher (A>B) than that of phenyl substituents (B). It was revealed that the optimum HQSAR model XI using PLS analyses had a fragment length (5∼8) with chirality at 5 components and hologram length 97 bin, which had a cross-validated q²(predictablities) of 0.916, and a conventional correlation coefficient r² (fitness) of 0.988, respectively. From the atomic contribution, the C3 and C5 atom in 2-oxyfuryl group contributed to binding affinity constants, whereas the central carbon atom in tert-butyl group on the cyclohexyl ring and the C4 atom of furyl group parts showed no contribution.

The Search of Pig Pheromonal Odorants for Biostimulation Control System Technologies: III. Comparative Molecular Field Analysis (CoMFA) on Binding Affinities between Ligands of 2-(Cyclohexyloxy) Tetrahydrofurane Derivatives and Porcine Odorant Binding Protein (생물학적 자극 통제 수단으로 활용하기 위한 돼지 페로몬성 냄새 물질의 탐색: III. 2-(Cyclohexyloxy) Tetrahydrofurane 유도체와 Porcine Odorant Binding Protein 사이의 결합 친화력에 관한 비교 분자장 분석)

  • Sung Nack-Do;Park Chang-Sik;Jung Hoon-Sung;Seong Min-Kyu
    • Reproductive and Developmental Biology
    • /
    • v.30 no.1
    • /
    • pp.13-19
    • /
    • 2006
  • To search of new porcine pheromonal odorants for biostimulation control system technologies to improve reproductive efficiency in livestock species, the comparative molecular field analysis (CoMFA) for binding affinity constant $(p(Od)_{50})$ between porcine odorant binding protein (pOBP) and ligands of odorant 2-(cyclohexyloxy) tetrahydrofurane derivatives as substrate molecule was conducted and discussed. In the optimized CoMFA model AIV with chirality $(C_1'(R),\;C_2(S))$ in substrate molecule and atom based fit alignment (A) of odorants, the statistical results showed the best predictability of the binding affinities $(p(Od)_{50})$ based on the LOO cross-validated value $r^2_{cv}.\;(q^2=0.886)$ and non-cross-validated conventional coefficient $(r^2_{ncv}.=0.984)$. the binding affinity constants exhibited a good correlation with steric (40.8%), electrostatic (14.6%) and hydrophobic (44.6%) factors of the substrate molecules. from the analytical results of the contour maps, which may give us some valuable informations to the modification of odorants for effective binding affinity.