• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.8C
• /
• pp.754-761
• /
• 2005

We derive and analyze a bit error rate(BER) expression of a Gray coded rectangular QAM(R-QAM) signal with maximal ratio combining diversity(MRC) reception over Nakagami-n(Rician) fading channels. The derived result is provided in terms of the Whittaker function and the confluent hypergeometric function. In addition, by performance comparison with M-PSK, we see the Nakagami-n fading channel characteristics. Because the derived expression is general, it can readily allow numerical e·valuation for various cases of practical interest such as line-of-sight (LOS) or satellite communication channel analysis.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.1 s.92
• /
• pp.40-48
• /
• 2005

In this paper, we explore the inductively coupled concept and propose a class of electrically small planar antennas. The antennas are optimized using NEC in conjunction with a Pareto GA. These antennas show good efficiency and bandwidth performance without any additional matching network. Several optimized designs are fabricated and measured. We explain the operating principle of these antennas using a simple lumped element circuit model. The proposed antennas are translated as printed lines on Duroid for RFID tag antennas.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.8
• /
• pp.747-752
• /
• 2008

We propose a guidance law based on pursuit-evasion game solutions, and analyze its performance. The game solutions are obtained from the pursuit-evasion game solver developed by Tahk. The initial value of the game solution is used for guidance, and then the pursuit-evasion game is solved again at the next time step. In this respect, the proposed guidance laws are similar to the approach of model predictive control. The proposed guidance method is compared with proportional navigation guidance for a pursuit-evasion scenario, in which the evader always tries to maximize the capture time. According to the comparison, it has larger a capture set than ones of proportional navigation guidance law.

• Aerospace Engineering and Technology
• /
• v.11 no.1
• /
• pp.169-177
• /
• 2012

This paper considers the explicit guidance algorithm to determine the closed-loop guidance law applicable to upper stages of a given space launch vehicle. It has the advantage of very simple forms derived from the flat earth assumption, which is appropriate for its on-board application. However the simple time-to-go prediction equation produces the degraded guidance performance of the launcher because of its inaccuracy. To overcome the problem, the elaborate prediction equations, which have been employed in Saturn and H-II, are attempted here. Finally, the simulation results show that the simple guidance approach requires the more accurate time-to-go prediction and gravity integrals for its broad application.

• Journal of the Korean Magnetics Society
• /
• v.25 no.6
• /
• pp.203-207
• /
• 2015

This paper introduces a probabilistic analysis method in order to analyze the effect of manufacturing tolerance on induction motor performance occurring in massive production. The univariate dimension reduction method is adapted to predict probabilistic characteristics of a performance function due to certain probabilistic distributions of design variables. Moreover, the sensitivity information on mean and variance of the performance function is estimated, and then the effect of randomness of individual design variables on the probability performance function is analyzed. The effectiveness and accuracy of the method is investigated with a mathematical model and an induction motor.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.69-72
• /
• 2000

본 논문에서는 부밴드에서의 수렴 성능 향상을 위하여 새로운 블록 LMS 알고리듬과 부밴드 각 적응필터에 가변 적응이득을 사용하는 가변 적응이득 블록 LMS 알고리듬을 제안한다. 이들 알고리듬들을 유도하기 위해 새로운 비용함수를 제안하며, 유도된 비용함수는 적응 필터 계수에 대해 2차 형식인 특징을 가진다. 제안한 알고리듬의 수렴 성능을 평가하기 위하여 부밴드 LMS 알고리듬과 가변 적응이득 알고리듬을 컴퓨터 모의 실험을 통해 비교함으로서 성능의 우수성을 입증하였다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.1177-1192
• /
• 2018

The objective of this study is to develop the existing drainage system for catching the partial leakage of tunnel structures operating in cold region. The drainage system consists of drainage board, Hotty-gel as a waterproofing material, cover for preventing protrusion of Hotty-gel, air nailer, fixed nail, pipe for collecting ground leak, pipe for conveying ground leak, wire-mesh, and sprayed cement mortar. The drainage systems were installed in conventional concrete lining tunnels to evaluate the site applicability and constructability. The performances of waterproof and the drainage in the drainage system were evaluated by injecting 1,000 ml of red water in the back of the drainage system at 7 days, 14 days, 21 days, 28 days, 2 months, 3 months, 4 months, 5 months, 6 months, 7 months and 8 months. During 8 months of field test, the average daily temperature of the tunnel site was measured from $-16.0^{\circ}C$ to $25.6^{\circ}C$. The daily minimum temperature was $-21.3^{\circ}C$ and the daily maximum temperature was $30.8^{\circ}C$. There was no problem in waterproof and drainage performance of the drainage board in the drainage system. However, the pipe for conveying ground leak had the leakage problem from 14 days. It is considered that the leakage of the pipe for conveying ground leak was caused by the deformation of the pipe of the flexible plastic material having a thickness of 0.2 cm by using the high pressure air nailer and the fixing pin and the insufficient thickness and width of the hotty-gel for preventing the leakage.

• Journal of Korean Society of Steel Construction
• /
• v.22 no.6
• /
• pp.553-561
• /
• 2010

The purpose of this paper is to analytically find the approximate supplement damping ratio of the viscous damper installed in self-centering (SC) single-degree-of-freedom (SDOF) systems with maximum displacements that are similar to those of elasto-plastic (EP) SDOF systems. The behavior of an SC SDOF system under harmonic cyclic loading was first described. Then an analytical model that can capture the behavior of the viscously damped SC SDOF system was introduced. Analysis parameters that characterize the hysteresis of the EP and SC SDOF systems were chosen, and nonlinear time-history analyses were performed using 20 historical accelerograms. Most of the SC SDOF systems with viscous dampers with approximately 10-15% damping ratios presented mean maximum displacement values that were similar to those of the EP SDOF systems. To investigate in detail the seismic performance of both systems, three EP SDOF systems and six corresponding SC SDOF systems were selected. The analyses showed that all the SC SDOF systems eliminated the residual displacements after the end of their shaking, and that the SC SDOF systems with 15% damping ratios performed better than the EP SDOF systems in terms of maximum displacement and acceleration response.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.441-441
• /
• 2008

전지의 안전성은 리튬이차전지에서 가장 중요한 요소로 주목받고 있다. 대형전지나 하이브리드 자동차와 같은 저장장치는 안전회로의 발전이나, 안성성과 신뢰성이 높은 물질이 도입되어야 하는 선결조건이 있다. Triazine 유도체는 산업용 난연제로 알려져 있다. 이를 전지로 도입하기 위한 시도는 아직 보고되어 있지 않다. 난연성 물질을 전지에 첨가하면, 그 난연성을 증가하는데, 전지의 성능을 저해하는 단점을 많이 관찰해왔다. 이 논문에는 Triazine 유도체를 전해액 첨가제로 사용하여, 전지성능의 저해여부를 관찰하고 아울러 전지의 열안전성을 측정함으로서 난연 첨가제로서 가능성을 판단하고자 하였다. 실험결과는 전지의 성능을 저해하지 않고 전극의 열안전성을 개선하는 것을 보여주었다.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1042-1043
• /
• 2008

본 논문에서는 국내 경전철에 사용되는 선형유도전동기의 성능 분석을 통하여 지상 2차측의 방식을 선정하고자 한다. 일반적으로, 등가회로를 이용한 해석적 방법은 선형전동기의 커다란 공극, 단부효과, 횡방향 효과, 3차원 형상, 회전기에 비해 상대적으로 큰 누설 등으로 인하여 성능을 정확히 예측할 수 없다. 또한, 수치해석적 방법은 고용량의 메모리와 해석시간을 요구한다. 그러나 본 논문에서는 등가회로법과 수치해석법을 혼용하여 좀 더 빠르고 정확한 성능 분석을 수행하였으며 제안된 방법을 통하여 도시철도차량용 선형유도전동기에 적합한 2차측 방식을 선정하였다.