• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.2A
• /
• pp.1-11
• /
• 2005

S-CDMA is the advanced physical layer modulation techniques of DOCSIS 2.0 specification. S-DMT is another challenging modulation technique for cable modem upstream channel due to the intrinsic robustness for fading and impulse noise. The BER performance of S-DMT and S-CDMA over the mixed channel model of AWGN and impulse noise were evaluated in comparison with TDMA. The mathematical BER derivation and the comparison of those three types of technique were performed based on the ${\varepsilon}-mixture$ non-Gaussian impulse noise model. The results of simulation show good compliance with those of analytic BER derivation. By the results of comparisons, it was verified that the performance of S-CDMA and S-DMT is almost the same, but the performance of S-DMT is far superior to that of TDMA at typical BER range of the practical data communications.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.9
• /
• pp.874-883
• /
• 2008

This study considers powered explicit guidance, one of the closed-loop guidance laws for satellite launch vehicles. The guidance algorithm employed here does not include the iterative procedure of the original algorithm. Also, the single-target algorithm to treat the general time-varying thrust profiles is described. The computer simulations for the 6-DOF launch vehicle model are performed to investigate the orbit injection accuracy of the guidance algorithm in the nominal/off-nominal flight conditions.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.38 no.3
• /
• pp.207-212
• /
• 2010

This paper presents a spiral descending path and a landing guidance law for net-recovery of a fixed-wing unmanned aerial vehicle. The net-recovery landing flight is divided into two phases. In the first phase, a spiral descending path is designed from an arbitrary initial position to a final approaching waypoint toward the recovery net. The flight path angle is controlled to be aligned to the approaching direction at the end of the spiral descent. In the second phase, the aircraft is guided from the approaching waypoint to the recovery net using a pseudo pursuit landing guidance law. Six degree-of-freedom simulation is performed to verify the performance of the proposed landing guidance law.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.6
• /
• pp.393-400
• /
• 2022

The Divert and Attitude Control System(DACS) used in high-altitude engagements is expensive and complex. In this paper, we design a high-altitude terminal guidance and control loop of guided-missile equipped with a Thrust Vector Control(TVC) that is less expensive and simpler than DACS. The proposed system utilizes a quaternion feedback control technique to track the thrust attitude command converted from the acceleration command of true proportional navigation guidance. The performance analysis of the proposed terminal guidance and control loop is conducted through engagement simulations against ballistic targets at a high altitude.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.630-632
• /
• 1998

본 논문에서는, Multi[le-Buffered a$\times$a Crossbar 수위치의 성능 분석 모형을 제안하고 스위치에 장착된 buffer 의 개수의 중가에 다른 성능 향상 추이를 분석하였다. buffered스위치 기법은 다수 데이터 패킷을 동시에 전송할 때 네트웍에서 발생되는 충돌문제를 효과적으로 해결할 수 있는 방법으로 널리 알려져있다. 제안된 성능 예측 모형은 스위치 입력 단에 유입되는 데이터 패킷이 buffered 스위치 내부에서 전송되는 유형을 확률적으로 분석하여 수립되었다. 모형의 수학적 복잡도 해결을 위하여 확률 식 유도 과정 등에 steady state 개념을 도입하였다. 제안한 모형은 스위치 크기 및 스위치에 장착된 buffer의 개수와 무관하게 buffered a$\times$a 크로스바 스위치의 성능 예측을 가능케 하고, 나아가서 이들로 구성된 다층 연결 망의 성능 분석에 확대 적용이 가능하다. 제안한 수학적 성능 분석 연구는 실효성 검증을 위하여 병행된 시뮬레이션 결과는 미세한 오차 범위 내에서 모형의 예측 데이터와 일치하는 결과를 보여 분석 모형의 타당성을 입증하였다. 또한, 분석 결과 스위치에 소수의 버퍼를 장착했을 때, throughput이 크게 증가하지만, 네 개 이상의 버퍼를 장착되는 버퍼의 개수가 네 개 정도일 경우 가격 대 성능비가 우수한 것으로 추론되었다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.341-344
• /
• 2008

앞으로 국제경쟁력 확보를 위해서는 성능중심의 건설기술기준 적용이 필요하다. 성능중심의 건설기준을 개발하고, 성능계약제도 도입방안을 구축함으로써 시설물의 성능을 향상시키고, 생애주기비용(LCC)을 절감하며, 설계 및 시공자의 기술개발을 유도하는 것이 필요하다. 본 연구에서는 건축전기 설비분야의 에너지성능 기준 개념과 외국의 도입사례를 살펴보고, 에너지성능기준 개발 대상 및 범위를 설정하고 성능기준 개발을 위한 접근방법을 도출하였다.

• Journal of the Korean Society for Railway
• /
• v.13 no.2
• /
• pp.166-172
• /
• 2010

Currently, vector control is used for speed control of trains because induction motor has high performance is installed in Electric railroad systems. Also, control of the induction motor is possible through various methods by developing inverters and control theory. Presently, rolling stocks which use the induction motor are possible to brake trains by using AC motor. Therefore model of motor block and induction motor is needed to adapt various methods. There is Variable Voltage Variable Frequency (VVVF) as the control method of the induction motor. The torque and speed is controlled in the VVVF. The propulsion system model in the electric railroad has many sub-systems. So, the analysis of performance of the speed control is very complex. In this paper, simulation models are suggested by using Matlab/Simulink in the speed control characteristic. On the basis of the simulation models, the response to disturbance input is analyzed about the load. Also, the current, speed and flux control model are proposed to analyze the speed control characteristic in the train propulsion system.

• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.226-235
• /
• 1995

An unmanned speed sprayer was developed using a remote control and an inductive cable guidance systems to protect operators and environment from hazardous pesticides. The sprayer consists of a remote control system, an induction system, obstacle detectors, control actuators and an one-chip microcomputer. The sprayer can be operated by the induction guidance and/or remote control. The following summarize characteristics of the developed speed sprayer. 1) Both the remote control and the induction guidance operation were possible with the developed speed sprayer. 2) Sixteen functions of the forwarding, backing, halting, steering, 3-way valve for nozzles and fan operating etc. were utilized on the remote control system. 3) It was concluded that the DTMF method, having less transmitting error, performed better than the FSK method for an agricultural remote controller. A radio station may be necessary. 4) The digital inductive guidance system, consisting of five low-impedance detection coils and a window comparator circuit, performed better than the analog detecting system, guiding route using inductive voltage differential from tow detection coils.

• Proceedings of the IEEK Conference
• /
• 2001.09a
• /
• pp.967-970
• /
• 2001

본 논문에서는 적응 필터의 계수 갱신에서 가변 블록을 사용하는 방법을 제안하였다. 데이터 블록의 길이는 MSE 학습곡선의 시정수에 비례하도록 하였다. 이 방법에서는 적응 필터가 정상상태로 접근함에 따라 스텝사이즈를 조정하여 필터계수 갱신의 횟수를 줄일 수 있다. 제안한 방법의 유용성을 입증하기 위한 컴퓨터모의 실험을 통해 기존의 최적 스텝사이즈 수열을 이용한 알고리듬과 가변 스텝사이즈 알고리듬과 성능을 비교하였다. 그리고 MSE 의 초기값을 최소화하는 최적 초기 스텝사이즈를 유도하였다. 유도된 최적 스텝사이즈를 가변 스텝사이즈 알고리듬에 적용, 그 성능을 평가 하였다.

• Proceedings of the KIEE Conference
• /
• 1997.07f
• /
• pp.2066-2068
• /
• 1997

네온용 전자식 안정기(EBN)의 출력선간 전자파방해(EMI)로 인한 네온관간의 신호상쇠 현상을 방지하는 회로를 설계하였다. 특히 네온관이 가까이 위치할 때 전자파유도로 인하여 네온발광이 상쇄되는 원인을 방지함으로써 EBN의 성능이 개선되는 결과를 얻었다. 또한 유도전자파를 방지함으로써 인체에 유해한 전자파를 차단하는 효과도 얻었다.