• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.12
• /
• pp.1-7
• /
• 2001

Single-layer polymer green electroluminescent devices were fabricated with novel material synthesis by using moleculely-dispersed TTA and NIDI into the polymer PC(B79) emitter layer doped with C6 fluorescent dye which has low operating voltage and high quantum efficiency. A EL cell structure of glass substrate/indium-tin-oxide/PC:TTA:NIDI:C6/Ca/Al was employed and compared with various low work function cathode electrodes Ca and Mg metals. By adjusting the concentration of the fluorescent dye C6, low turn-on voltage of 2.4V was obtained, maximum quantum efficiency of 0.52% at 0.08mole% has been improved by about a factor of ~50 times in comparison with the undoped cell. The PL and EL colors can't be turned by changing the concentration of the C6 dopant. PL emission peaking was obtained at 495nm and EL emission peaking at 520nm with FWHM ~70nm

• Applied Chemistry for Engineering
• /
• v.27 no.5
• /
• pp.455-466
• /
• 2016

Organic light-emitting diode (OLED) has drawn a lot of attention in academic and industrial fields, which has been successfully commercialized in mobile phones and TV's. In the field of lighting, unlike the existing incandescent or fluorescent lighting, OLED has distinctive qualities such as surface lighting-emission, large-area, lightweight, ultrathin, flexibility in addition to low energy use. This article introduces prominent fluorescent, phosphorescent, and luminescent materials applied to white OLED (WOLED). The understanding and systematic classification of previously studied substances are expected to be greatly helpful for the development of new luminous materials in future.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.12
• /
• pp.18-23
• /
• 2000

In this paper, we propose the organic light-emitting devices with vacuum evaporated ultrathin CsF layer between the AI electrode and conjugated polymer MEH-PPV which was spin coated. In this structure, the CsF layer will be well transferred the electron injection from the electrode to the emission layer MEH-PPV. Finally this structure enhances the emission efficiency of the organic light-emitting device. And we measured the I-V-L properties with the split of CsF thickness into the $2{\AA},\;4{\AA},\;8{AA},\;10{\AA},\;20{\AA},\;50{\AA},\;75{AA}$ respectively. And also we evaporated CsF/Al, CsF/Au Cs/Au electrode respectively for the comparison. As the results, we obtained the maximum quantum efficiency 0.6% at $4{\AA}$ CsF thickness and then at $8{\AA}$, it decreased a little but it's still better than pure Al electrode which has 0.01%.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.94-97
• /
• 2023

2,7-bis(3',6'-diphenyl-[1,1':2',1"-terphenyl]-4'-yl)-9,9'-spirobi[fluorene] (BTPSF) and 2,7-bis(1,4-diphenyltriphenylen-2-yl)-9,9'-spirobi[fluorene] (BDTSF) were successfully synthesized as novel blue-emission materials for organic light-emitting diodes (OLEDs) based on the spirobifluorene (SBF) moiety. BTPSF and BDTSF were obtained in high purity via a Diels-Alder reaction, without the use of a catalyst. Photoluminescence spectra of the synthesized materials showed maximum emitting wave-lengths of approximately 381 and 407 nm in solution and 395 and 434 nm in the film state, for BTPSF and BDTSF, respectively, indicating ultra-violet and deep blue emission colors. BDTSF was applied as an emissive layer (EML) in non-doped devices and achieved a current efficiency of 0.61 cd/A and an external quantum efficiency (EQE) of 0.46%.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.186-186
• /
• 2010

액정디스플레이, 유기발광소자 및 태양전지에서 전도성 투명전극으로 indium-tin-oxide (ITO)가 일반적으로 많이 사용되고 있지만 인듐의 희소성과 유독성으로 인하여 ITO를 대체할 수 있는 물질에 대한 많은 연구가 현재 진행되고 있다. ITO 전극을 대체할 수 있는 물질 중에서 Al 도핑된 ZnO (AZO) 박막은 높은 전도성과 광학적 투과성 때문에 다양한 광전소자의 전극과 윈도우 물질로 많은 응용 가능성을 보여주고 있다. 본 연구에서는 여러 가지 스퍼터링 증착 조건에서 증착된 AZO 박막의 전기적특성과 광학적 특성을 조사하였다. 기준시료의 AZO 박막 증착 조건은 ZnO-2 wt.% $Al_2O_3$세라믹 타겟을 사용하였고 $250^{\circ}C$의 기판 온도에서 100 W 전력으로 5 mTorr의 진공 분위기에서 증착되었다. 최적의 AZO 박막 조건을 얻기 위해 증착 온도와 증착 챔버의 압력을 변화하면서 AZO 박막의 전기적 특성 변화와 광학적 특성 변화를 조사하였다. 4-포인트 프로브 측정과 홀 효과측정으로 각기 다른 조건에서 증착한 AZO 박막의 비저항과 전하농도 값을 비교 분석하였고 UV 스펙트로미터 측정을 통해서 AZO 박막의 투과율을 조사하였다. 스퍼터링 방법으로 증착된 AZO 박막은 높은 전도성과 광학적 투과성을 가지기 때문에 액정디스플레이, 유기발광소자 및 태양전지의 투명전극으로 사용할 수 있음을 알 수 있었다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.11a
• /
• pp.166-167
• /
• 2009

본 연구에서는 2,3,5,6-fluoro-7,7,8,8-tetracyanoquinodimethane (F4-TCNQ)를 이용한 유기 발광 소자의 전기적 특성에 대하여 연구하였다. F4-TCNQ 는 높은 전자 친화도를 가지고 있어서 전하 수송층이나 전하 주입층에 많이 사용되고 있다. 또한 TCNQ 유도체들은 물질의 전도도를 조절하는 용도로 많이 이용된다. TCNQ 유도체를 유기 발광 소자의 전하 수송층이나 전하 주입층에 이용할 경우, 소자의 구동 전압이나 효율과 같은 특성들이 향상된다고 알려져 있다. 우리는 소자 특성에 있어서 F4-TCNQ의 영향을 알아보기 위해서 ITO(170nm)/TPD(40nm)/$Alq_3$(60nm)/LiF(0.5nm)/Al(100nm)의 구조로 기본 소자를 제작하였다. 그리고 TPD층에 F4-TCNQ를 도핑하여 소자를 제작하였다. 도핑 농도는 5와 10%로 하였다. 또한 ITO와 TPD층 사이에 F4-TCNQ층을 1, 2, 그리고 5nm의 두께로 하여 소자를 제작하였다. F4-TCNQ를 5와 10% 도핑한 소자의 구동 전압은 도핑하지 않은 소자에 비해 감소하였다. 그리고, ITO와 유기물층 사이에 F4-TCNQ층을 삽입한 소자의 특성은 삽입하지 않은 소자에 비해 향상되었다.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.670-674
• /
• 2009

3-Chromonealdehyde(2,2-disubstituted)hydrazone derivatives were synthesized by dehydration condensation. They are green-emitting materials for organic light emitting device (OLED) composed of electron acceptor of 3-chromonealdehydes and electron donor of 2,2-disubstituted hydrazones by a conjugated structure. The structural properties of reaction products were analyzed FT-IR and $^1H-NMR$ spectroscopy. The thermal stabilities and reactivities were measured by melting points and yields. The UV-visibles and PL properties can be determined by excitation spectra and emission spectra, respectively.

• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.9-15
• /
• 2002

In this thesis, blue emission organic light emitting devices were fabricated by using vacuum deposition method. Two types of device were employed to realize blue emission. Type I had an emitting layer containing TPB-doped $Alq_3$ and type II had an emitting layer containing DPA-doped $Alq_3$. The variable dopant concentration was 0.5 ~2 wt%. The electrical and optical characteristics of these devices have been investigated. The more dopant concentration increased, the nearer the blue coordinate. Type I than type II had a lower turn on voltage and driving voltage. The emission luminescence of type II was brighter than that of type I. When we applied 15V to type II with DPA(2wt%)-doped $Alq_3$, we have achived the emission luminescence of 1282cd/$m^2$, the emission wavelength of 476nm and the blue emission CIE coordination of (0.1273, 0.0672)

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.128-133
• /
• 2002

In a recent effort to develop polymer light-emitting diodes (LEDs) as promising flat panel display components, measurements of reliable absolute photoluminescence (PL) and electroluminescence (EL) efficiency for polymer materials are required. In this work, we performed the measurement of PL and EL efficiency of luminescent polymers using an integrating sphere technique. The external PL efficiency of MEH-PPV was estimated to be 8 ($\pm$2)% together with the value of 0.02 1m/W for the external EL efficiency. This PL efficiency is in good agreement with published values, indicating that our PL efficiency measurements are somewhat legitimate. We believe this study might contribute to the research and development of organic materials for optoelectronic devices.

• Applied Chemistry for Engineering
• /
• v.21 no.4
• /
• pp.357-365
• /
• 2010

Combinatorial synthesis, which has been adopted as an efficient method for deriving a leading compound in pharmaceutical chemistry, is recently being applied in various fields along with the rapid development of analysis and examination technology. It is especially attracting much attention as an efficient strategy to secure various potent compounds rapidly in the areas of developing new materials where the relationship between the chemical structure and the property is not revealed. Several reports and reviews have already been published for the combinatorial chemistry and combinatorial synthesis. This report briefly introduces trends in the combinatorial development of new materials and discusses the cases of developing organic luminescent materials.