• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1993.07a
• /
• pp.55-58
• /
• 1993

유공식 방파제는 기존 직립 혼성방파제의 케이슨 전면에 유공벽과 유수실을 설치함으로써 교량이 유공벽을 통과하여 유수실내로 진입할 때 와유 등에 의해 접근 파랑에너지를 감소시킬 수 있도록 고안된 구조형식을 갖는다. 따라서, 방파제 주변의 항로유지에 있어서 기존 직립 혼성방파제에 비해 우수한 특성을 지닌 형태이다. 이러한 방파제 형태는 일본에서는 다수 시공되어 성공적으로 운영되고 있으나 국내에서는 아직도 이렇다 할 시공실적이 없다. (중략)

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.44-48
• /
• 2011

본 연구에서는 구조물 상치에 에어챔버를 설치하여 챔버 내부의 공기주입량에 따라 흘수심을 조절 할 수 있는 유공 및 투수성부유식방파제를 사용하였으며, 부유식방파제의 흘수심구간에 유공을 두어 내부의 흐름에 따른 에너지소산 효과를 수리모형실험을 통하여 분석하였다. 기존 연구에 의하여 선행되어진 부유식방파제의 형상은 구조물 제체의 입사면과 투과면이 막힌 형태의 연구가 대다수였으나, 계류라인의 장력에 따른 부체의 안정성을 고려하여 본 수리모형실험에서는 입사면 흘수심구간과 투과면 흘수심구간에 유공 및 투수층을 두어 진행하는 입사파랑을 일부 흡수하도록 하였다. 또한, 부유식방파제 흘수심단면의 내부에서 흐름변화에 의한 에너지소산 효과와 입사면과 투과면의 유공률 변화에 따른 방파성능을 무공 부유식방파제와 비교하며 효율성을 분석하였다.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.58-63
• /
• 1992

In addition to the traditional breakwater faculty, multipurpose breakwater of vertical slit type perforated breakwater was planed and designed using the idea of waterfront and wave dissipation of breakwater. As a result of experimental test, the good hydraulic characteristics was confirmed by comparison of traditional structure, and in order to the field application the section was improved on the test of result.

• Journal of Navigation and Port Research
• /
• v.38 no.5
• /
• pp.503-509
• /
• 2014

In this study, a new concept perforated breakwater is proposed, which is having resonant channels. In the channel, perforated plate is installed for dissipating wave energy induced by flow separations. The breakwater has two advantages compared with conventional perforated breakwater having wave chamber with slotted walls. One is easy to control the target wave condition for dissipating wave energy, and the other is having the high structural safety because the structural members are not exposed to impact waves, directly. To evaluate wave reflection characteristics of the proposed breakwater, numerical experiment was carried out by using Galerkin's finite element model based on the linear potential theory. The results indicated that considerable energy dissipation occurs near the resonant period of channel, and wave reflection characteristics are affected by channel shape, location and opening ratio.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2013.10a
• /
• pp.149-150
• /
• 2013

Recently, various types of perforated breakwaters are being constructed for protecting offshore storm waves. In general, perforated breakwaters have wave chambers with perforated walls at seaside. Purposes of the wave chambers are to reduce wave reflections and maximum wave forces acting on the breakwater. Impact wave forces due to wave breaking can attack to the perforated wall directly, so the effects have to be considered in the design of the perforated wall carefully. Using resonance channels for wave energy dissipation, a new concept perforated breakwater is proposed, which is free from impact loads. Numerical simulation was made for wave reflection characteristics of the breakwater with respect to major design parameters. Numerical analysis was carried out using the Galerkin's FE model based on the linear potential theory considering energy dissipation on the perforated plate. Variations of wave reflection was investigated according to perforated ratios of perforated plate.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.6
• /
• pp.2317-2328
• /
• 2013

In this study, the effect of wave chamber slab on wave pressure along the first and second wall of the perforated caisson breakwater was investigated by performing physical experiment. The experiment was performed without and with the wave chamber slab of the perforated caisson by varying the front wall porosity. The discrepancy in magnitudes of the measured wave pressure along the both walls of the perforated caisson was apparent according to the existence of the wave chamber slab as significantly greater pressures were acquired for all the test cases when the wave chamber was closed upward by the slab. As a result, the magnitudes of the total wave force calculated by integration of the measured wave pressure also were much larger for the caisson breakwater having the wave chamber slab, exceeding the value based on the well known Takahashi's formula (Takahashi and Shimosako, 1994). With respect to the porosity of the front wall, meanwhile, higher pressures were obtained with a larger porosity, at both the first and second wall of the breakwater.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.32 no.6
• /
• pp.458-464
• /
• 2020

Calibration of load-resistance factors for the limit state design of perforated caisson breakwaters are presented. Reliability analysis of 12 breakwaters in nationwide ports was conducted. Then, partial safety factors and load-resistance factors were sequentially calculated according to target reliability index. Load resistance factors were optimized to give one set of factor for limit state design of breakwater. The breakwaters were redesigned by using the optimal load resistance factor and verified whether reliability indices larger than the target value. Finally, some load-resistance factors were proposed by changing target reliability index.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.5 no.3
• /
• pp.198-203
• /
• 1993

Hydraulic experiments were carried out to investigate the reflection characteristics of perforated breakwaters in regular wave conditions varying the width of wave chamber and the shape of perforated wall. It was found that the reflection coefficient of the perforated breakwater was very sensitive to the change of wave chamber width. giving its minimal value when the width of the wave chamber is approximately 0.2 times the wave length in the wave chamber. This phenomenon may be resulted from the wave resonance inside the wave chamber. The reflection coefficients slightly varied for all shapes of perforated wall. i.e., vortical slit, horizontal slit or circular hole. However, the reflection trend of the structure was not significantly affected by the shape of the perforated wall.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.35 no.1
• /
• pp.119-128
• /
• 2015

This study investigates the wave pressure characteristics of the pile-supported breakwater with single or double perforated walls through 2-D hydraulic experiments and the measured wave pressures are compared to those of wave pressures by Goda's formula. For single chamber, the measured wave pressures in the front wall and rear wall decreased to about 25% and 30%, respectively, compared to those of wave pressures by Goda's formula. Also, the decrease in the wave pressures for double chamber were about 27%, 53%, and 64% in the front wall, middle wall, and rear wall, respectively. It was found that the pile-supported breakwater with double perforated walls was more efficient than the single chamber due to wave dissipation effects of double slit walls with horizontal slits.

• Proceedings of the Korean Society of Coastal and Ocean Engineers Conference
• /
• 1992.08a
• /
• pp.130-134
• /
• 1992

본 연구의 목표는 혼성방파제의 무공 및 유공 케이슨에 작용하는 파압분포에 대한 기존의 연구결과를 조사, 분석, 정리하고 실제로 이들에 대한 수리모형실험을 실시하여 관측된 결과를 기존의 연구결과(곡본승리 등 1982, 고교중웅 등 1983, Goda 1985, Takahashi 1991)와 비교, 분석함으로써 케이슨에 작용하는 파압은 물론 기타 수리현상의 특성을 파악하는 데 있다.(중략)