• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.239-248
• /
• 2004

Likelihood of failure for the external corrosion of carbon and low alloy steels, which affect to a risk of facilities, was analyzed quantitatively through the risk based inspection using API-581 BRD. We found that the technical module subfactor (TMSF) decreased as the inspection number increased and it increased as the Inspection effectiveness and the used year increased. In this condition, the TMSF showed high value for the case of the marine/cooling tower drift area as a corrosion driver, poor quality of coating, no insulation, and low insulation condition.

• Journal of the Korea Safety Management & Science
• /
• v.8 no.2
• /
• pp.61-70
• /
• 2006

The likelihood of failure by the corrosion of high temperature $H_2S/H_2$, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that the corrosion rate was increased as temperature and $H_2S$ concentration were increased. Also, the technical module subfactor(TMSF) was increased as an used you increased, material thickness decreased, inspection number decreased, and inspection effectiveness increased. In these conditions, the maximum value of TMSF was not varied, but the TMSF was sensitively varied at low temperature for high concentration of $H_2S$.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.1
• /
• pp.65-76
• /
• 2007

The likelihood of failure for the stress corrosion cracking (SCC) of caustic cracking, which affect to a risk of facilities, was analyzed through the risk based-inspection using API-581 BRD. We found that SCC of the caustic cracking was occurred above 5 % NaOH concentration, and the technical module subfactor (TMSF) was maximized for above 50 % concentration. The heat traced and monitoring were not sensitive to the TMSF with NaOH concentration and temperature. But the steam out was more of less affect minimum value of the TMSF. Also, the inspection number, the inspection effectiveness, and the year since inspection were very sensitive to the TMSF with NaOH concentration and temperature. Therefore, the plan of next inspection will be established with compositively considering those at once.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.101-110
• /
• 2005

The likelihood of failure for the thinning of high temperature sulfide and naphthenic acid corrosion, which affect to a risk of facilities, was analyzed through the risk based inspection using API-581 BRD. We found that the corrosion rate was increased with increasing temperature and total acid number(TAN). And maximum value of the technical module subfactor(TMSF) was not varied with operating condition, but the TMSF was sensitively changed at the range of low temperature, low flow rate, and high TAN. Also, the TMSF was increased as an used year and inspection effectiveness increased, but it was increased as thickness, inspection number, and over design decreased.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.1-11
• /
• 2017

While they are becoming more viable, synthetic natural gas (SNG) plants, with their high temperatures and pressures, are still heavily dependent on advancements in the state-of-the-art technologies. However, most of the current work in the literature is focused on optimizing chemical processes and process variables, with little work being done on relevant mechanical damage and maintenance engineering. In this study, a combination of pipe system stress analysis and detailed local stress analysis was implemented to prioritize the inspection locations for main pipes of SNG plant in accordance to ASME B31.3. A pipe system stress analysis was conducted for pre-selecting critical locations by considering design condition and actual operating conditions such as heat-up and cool-down. Identified critical locations were further analyzed using a finite element method to locate specific high-stress points. Resultant stress values met ASME B31.3 code standards for the gasification reactor and lower transition piece (bend Y in Fig.1); however, it is recommended that the vertical displacement of bend Y be restricted more. The results presented here provide valuable information for future risk based maintenance inspection and further safe operation considerations.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2009.01a
• /
• pp.107-111
• /
• 2009

의료기관의 응급실은 환자의 생명을 다루는 긴박한 현장으로 환자에 대한 실시간 모니터링 및 관리가 필수적으로 요구되는 곳이다. 본 연구에서는 기존 응급실 진료 프로세스를 체계적으로 관리하고 모니터링 하기 위해 BPM 아키텍처를 도입하여 응급실 업무들을 표준화, 가시화함으로써 의료진의 신속한 응급 업무 대응이 가능한 응급신속대응관리시스템(EQRMS-Emergency Quick Response Management System)를 제안한다. 의료기관에서 BPM의 도입은 단순히 병원 경영 목표나 병원 내외부의 운영을 모니터링 할 수 있는 이점 이외에 병원 업무의 이윤을 극대화 할 수 있는 다양한 효과가 있다. 또한 임상위험수치 (CV-Critical Value)를 정의함으로써 복잡한 검사의 단순화와 검사 시간 단축, 검사의 오류 발생률 감소 등 환자의 안정성 제고 측면에도 크게 기여할 것이다.

• Korean Journal of Psychosomatic Medicine
• /
• v.27 no.2
• /
• pp.164-172
• /
• 2019

Objectives : The purpose of this study was to examine personality traits associated with suicidal symptoms (with history of suicide attempt or suicidal idea) in depressed patients. Methods : A sample 186 patients diagnosed with major depressive disorder was divided into two groups : suicidal group (with history of suicide attempt or suicidal idea, n=70) and non-suicidal group (without history of suicide attempt or suicidal idea, n=116). NEO Personality Assessment System were used to evaluate personality trait. Results : Neuroticism was high in suicidal group (p=0.041). In multivariate logistic regression, Neuroticism was also a significant influence on suicidal symptoms (Odds Ratio=1.04, 95% Confidence Interval 1.01-1.07, p=0.0145). Conclusions : High Neuroticism is a useful information to identify individuals at high risk of suicide in depressive patients.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.166-171
• /
• 2015

This paper shows the design of operational flight program(OFP) using model-based design(MBD) method which is used in various engineering fields to reduce time and flight risks for development. The verification of OFP for DO-178C guidelines carry out by a model advisor function of simulink. The flight control logic on simulink is converted into C-language by auto code generation tool from, then it is implemented on 32bit digital signal processor(DSP). The verifications of flight control algorithm on various weather conditions are performed by the HILS system with Flight simulator program, X-plane.

• Journal of the Korean Institute of Gas
• /
• v.24 no.5
• /
• pp.10-19
• /
• 2020

Valve leak accidents in petrochemistry plants and gas utilities cause human and property damage. The main reason why happen gas inhalation, poisoning, fire and explosion accidents is gas valve leakage. To prevent gas leakage, inspectors check the facilities in the field. And they are at risk of gas leak accidents. So we applied IoT-based risk assessment, monitoring and automatic control system. It can detect both internal and external gas leakage, do real-time monitoring of industrial valve in the plant by using hybrid sensor. As the new safety management system for industrial valve is developed, it needs method to evaluate device performance and environmental components for the system. This study is about development of method to verify performance of the explosion-proofed hybrid sensing system include gas detector and optical fiber sensor supporting wire and wireless communication.

• Journal of the Korean Society of Radiology
• /
• v.11 no.1
• /
• pp.49-54
• /
• 2017

As the Radiofrequency(RF) increases with the magnetic field strength, the wavelength of the RF excitation field becomes smaller, which leads to more the thermal effect in the human-body placed in the electric field. MRI scanner used was GE signa 1.5T, HDx 3.0T and Philips 3.0T with same routine clinical sequence protocol. Therefore temperature was measured before and after each scan. Taken the temperatures in the ear with ear infra-red type thermometer(Braun co). 3.0T were temperature increases more than $0.15^{\circ}C$ and GE 3.0T MRI equipment about $0.14^{\circ}C$ higher than the Philips 3.0T MRI(p<0.012). Psychogenic status was investigated by the survey respondents about their status can not just answer therefore, a little different from the expected. In our study of Thermal effect of clinical MRI with clinical protocol sequence, we found that the 3.0T in the body-temperature rise was greater than the 1.5T. Therefore, in clinical 3.0T examine the dangerous situation caused by the temperature rise occurred (burns, impaired thermoregulatory mechanism in patients with high-temperature damage, exhaustion occurs due to excessive sweating), not to appear the more watched the patient's condition with procedure.