• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2677-2682
• /
• 2015

Smart factory has the function of integrated management of production process management, logistics management as a intelligent factory, it is also emerging as the core of new industry which converges ICT and manufacturing business. We suggested Smart factory logistics management system which embedded position tracking technology and the system converges ICT and IoT. This suggested system can manage all the processes from production to release by tracking route and position based on signal strength of bluetooth 4.0 beacon tag. For the more, we will expect to apply to the various type of factory environments like detachable installation, optimized management using sensor.

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.734-735
• /
• 2007

송전선로를 설계할 때, 경제성을 고려하는 것이 중요하지만, 정전에 의한 피해를 최소화하기 위하여 전기적인 절연설계 및 구조 설계를 최적화하도록 노력하고 있다. 그러나 낙뢰는 절연설계에 있어서 외부적인 요소로 낙뢰에 의한 계통의 순간 정전을 최소화하기 위해서는 많은 비용뿐만 아니라 기술적으로도 해결해야할 문제가 많이 있다. 이러한 낙뢰에 의한 정전은 외국의 경우 230 kV 송전전로에서 약 26%, 345 kV 송전선로에서 약 65%를 점유하는 것으로 보고 되고 있다. 한전의 경우도 약 60%가 낙뢰에 의한 고장으로 이것을 줄이려는 관심이 높아지고 있다. 좁은 국토의 효율적 이용의 필요성과 송전선로 건설시 주민들의 반대 등 제약 요소 때문에, 한전에서는 세계 최초로 765 kV 송전선로를 2회선 선로로 설계하고 건설하여 운영하고 있어, 외국의 1회선 송전선로에 비해 낙뢰에 의한 순간정전에 취약한 구조를 갖고 있다. 특히 한전에서 운전중인 765 kV 송전선로 중에서 동해안 지역에 위치한 송전선로의 뇌 사고율이 서해안 지역에 위치한 송전선로보다 높은 것으로 보고 되고 있어, 본 논문에서는 그 원인을 분석하고자 한다.

• Annual Conference of KIPS
• /
• 2018.05a
• /
• pp.242-243
• /
• 2018

무선 통신기술이 발전함에 따라 위치기반 서비스에 대한 관심 또한 증가하고 있다. 그 중 저전력 블루투스 기술을 사용한 비콘(Beacon)은 실내 위치인식이 불가능한 GPS와 달리 실내에서도 측위가 가능하여 사용성이 주목 받고 있다. 그러나 비콘으로부터 수신되는 RSSI(Received Signal Strength Indication) 값은 여러 환경요소로부터 영향을 받기 때문에 RSSI값을 기반으로 한 거리측정이 실제거리와의 오차가 크게 나타난다. 이에 따른 문제를 해결하기 위한 기존의 연구들이 존재하지만 평균적으로 10m이하의 거리에서 2m의 오차를 나타내고 있다. 본 연구에서는 RSSI의 오차를 줄이기 위해 확장 칼만 필터와 신호 안정화 필터를 사용하여 Raw Data를 전처리 한 후 산출된 Cleaned Data를 기반으로 각 거리단위에 최적화된 ANN(Artificial Neural Network)모델을 생성하여 거리를 측정하는 기법을 제안한다.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.419-424
• /
• 2019

The FCM algorithm finds the optimal solution through iterative optimization technique. In particular, there is a difference in execution time depending on the initial center of clustering, the location of noise, the location and number of crowded densities. However, this method gradually updates the center point, and the center of the initial cluster is shifted to one side. In this paper, we propose a TI-FCM(Triangular Inequality-Fuzzy C-Means) clustering algorithm that determines the cluster center density by maximizing the distance between clusters using triangular inequality. The proposed method is an effective method to converge to real clusters compared to FCM even in large data sets. Experiments show that execution time is reduced compared to existing FCM.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.185-188
• /
• 2009

In this paper, Position Controller for balance of Seesaw System design using PID Algorithm. Seesaw System is that it's system use widely to analyze of ship or flight dynamics, Inverted Pendulumand, Robot System, manage system for theory of modern control system and all sorts of analysis. In case of Seesaw System, it's necessity that understand and analysis of system and correct selection of parameter because the system is strong nonlinear control system. It guarantees efficiency and stability to adapt quickly for disturbance or change of controller from PID Algorithm of guarantee safe from simple and long history and PSO(Particle Swarm Optimization) that sort of metaheuristic optimization that need to accuracy and fast PID parameter tuning.

• Journal of the Korean Institute of Gas
• /
• v.17 no.2
• /
• pp.59-69
• /
• 2013

This study presents development of the ANN simulator for well placement of infill drilling in gas fields. The input data of the ANN simulator includes the production time, well location, all inter well distances, boundary inter well distance, infill well position, productivity potential, functional links, reservoir pressure. The output data includes the bottomhole pressure in addition to the production rate. Thus, it is possible to calculate the productivity and bottomhole pressure during production period simultaneously, and it is expected that this model could replace conventional simulators. Training for the 20 well placement scenarios was conducted. As a result, it was found that accuracy of ANN simulator was high as the coefficient of correlation for production rate was 0.99 and the bottomhole pressure 0.98 respectively. From the resultes, the validity of the ANN simulator has been verified. The term, which could produce Maximum Daily Quantity (MDQ) at the gas field and the productivity according to the well location was analyzed. As a result, the MDQ could be maintained for a short time in scenario C-1, which has the three infill wells nearby aquifer boundary, and a long time in scenario A-1. In conclusion, it was found that scenario A maintained the MDQ up to 21% more than those of scenarios B and C which include parameters that might affect the productivity. Thus, the production rate can be maximized by selecting the location of production wells in comprehensive consideration of parameters that may affect the productivity. Also, because the developed ANN simulator could calculate both production rate and bottomhole pressure, respectively, it could be used as the forward simulator in a various inverse model.

• Progress in Medical Physics
• /
• v.21 no.4
• /
• pp.360-366
• /
• 2010

To generate on-board digital tomosynthesis (DTS) for three-dimensionalimage-guided radiation therapy (IGRT) as an alternative to conventional portal imaging or on-board cone-beam computed tomography (CBCT), two clinical cases (liver and bladder) were selected to illustrate the capabilities of on-board DTS for IGRT. DTS images were generated from subsets of CBCT projection data (45, 162 projections) using half-fan mode scanning with a Feldkamp-type reconstruction algorithm. Digital tomosynthesis slices appeared similar to coincident CBCT planes and yielded substantially more anatomic information. Improved bony and soft-tissue visibility in DTS images is likely to improve target localization compared with radiographic verification techniques and might allow for daily localization of a soft-tissue target. Digital tomosynthesis might allow targeting of the treatment volume on the basis of daily localization.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.473-476
• /
• 2007

Location determination of mobile user via RSSI approach has received ample attention from researchers lately. However, it remains a challenging issue due to the complexities of RSSI signal propagation characteristics, which are easily exacerbated by the mobility of user. Hence, a segmentation-based linear spline interpolation method is proposed to cater for the dynamic fluctuation pattern of radio signal in complex environment. This optimization algorithm is proposed in addition to the current radiolocation's (CC2431, Chipcon, Norway) algorithm, which runs on IEEE802.15.4 standard. The enhancement algorithm involves four phases. First phase consists of calibration model in which RSSI values at different static locations are collected and processed to obtain the mean and standard deviation value for the predefined distance. RSSI smoothing algorithm is proposed to minimize the dynamic fluctuation of radio signal received from each reference node when the user is moving. Distances are computed using the segmentation formula obtain in the first phase. In situation where RSSI value falls in more than one segment, the ambiguity of distance is solved by probability approach. The distance probability distribution function(pdf) for each distances are computed and distance with the highest pdf at a particular RSSI is the estimated distance. Finally, with the distances obtained from each reference node, an iterative trilateration algorithm is used for position estimation. Experiment results obtained position the proposed algorithm as a viable alternative for location tracking.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.7B
• /
• pp.578-585
• /
• 2012

Location tracking system through GPS and Wi-Fi is available at no additional cost in an environment of IEEE 802.11-based wireless network. It is useful for many applications in outdoor environment. However, a previous systems used for general device to tag. It is unsuitable for power aware location tracking system because general devices is more expensive and non-optimized for tracking. The hand-off method of IEEE 802.11 standard is not enough considering power consumption. This thesis analyzes the previous location tracking systems and proposes power aware system. First, we designed and implemented tag to optimize location tracking. Next, we propose low-power hand-off method and low-power behavior model in implemented tag. The proposed hand-off method resolve power problem by using the location information and behavior model minimize power consumption of tag through power-saving mode and the concept of duty cycle. To evaluating proposed methods and system performance, we perform simulations and experiments in real environment. And then, we calculate tag's power consumption based on the actual measured current consumption of each operation. In a simulation result, the proposed behavior model and hand-off method reduced about 98%, 59% than the standard's hand-off and default behavior model.

• Journal of Korea Water Resources Association
• /
• v.32 no.5
• /
• pp.557-564
• /
• 1999

Monitoring of groundwater Quality is essential for the preservation of groundwater resources. In practice. however, groundwater monitoring network is designed based on the experience and intuition of experts or on the convenience. This study proposes a simulation-optimization approach for the optimal design of monitoring networks. In it, the predicted three-dimensional concentration data are used as the input of an optimization problem. Various design objectives and constraints are considered and the problem is formulatcu as the 0-1 integer programming. The methodology was applied to a sanitary landfill site. The results show that the monitoring network configuration changes as the monitoring goal, operation time and constraints vary. The proposed method turns out to be an efficient tool for the wide range of groundwater Quality monitoring network design problems.oblems.