• Proceedings of the Korea Water Resources Association Conference
• /
• 2016.05a
• /
• pp.265-265
• /
• 2016

호우가 홍수에 미치는 영향의 분석은 수문현상을 이해하고 수공구조물을 설계하는데 반드시 필요한 절차이다. 호우가 홍수에 미치는 영향을 분석하기 위해서 독립된 소유역부터 비독립된 대유역까지 홍수량을 계산하고 그 상관성을 이해해야 하지만 상류쪽의 소유역의 경우 관측자료의 부재가 빈번하여 이러한 전반적인 분석이 쉽지 않다. 그리고 소유역과 대유역의 홍수특성을 연관지어 분석하기 위해서는 비교가능한 홍수특성을 추출해야 하며 이러한 일관된 잣대를 사용한 홍수분석은 중요하다. 본 연구에서는 소유역의 자료부재를 보완하기 위해 자료공간확장 방법을 제안하고 이를 통하여 안동댐 유역내 총 50개 지점의 홍수 시계열자료를 생성하였다. 자료공간확장 방법으로써, 안동댐유역의 1989년부터 2009년까지의 자료의 질이 좋은 20개의 사상을 추출하였고 안동댐유역 내에 위치한 안동댐, 도산, 소천의 수위관측지점의 관측유량자료에 대해 분포형 모형인 GRM 모형의 매개변수를 시행착오법으로 동시에 보정하여 한 개셋의 최적 매개변수를 추정하였다. 이때 모의결과를 평가하기 위하여 Nash-Sutcliffe (NS) 계수를 사용하였으며 20갯 사상의 세군데 관측수위지점에 대해서 모의결과가 전반적으로 0.5 NS 계수 이상으로써 만족할 만한 결과를 얻었다. 이 추정된 매개변수는 47개의 추가적인 관심지점의 유출모의에 사용되었으며 이렇게 모의된 유출시계열 자료는 관측시계열 자료로 가정하여 사용하였다. 이렇게 공간확장되어 생성된 시계열 자료는 이동평균방법을 사용하여 홍수강도-지속시간 곡선으로 변환되었고 50개 유역의 평균강우량 시계열 자료 또한 같은 밥법을 사용하여 강우강도-지속시간 곡선으로 변환되었다. 50개 유역의 비교가능한 일관된 홍수특성을 추출하기 위해 비유량법의 유출계수를 계산하였다. 유출계수를 계산하기 위해 유역별 도달시간을 계산하였으며 이 도달시간에 해당하는 강우강도를 추출하였다. 그리고 유역별 첨두 홍수강도를 유역별 도달시간에 해당하는 강우강도로 나눠줌으로써 유역별 유출계수를 계산하였고 이 유출계수를 유역면적에 대해 도시함으로써 그 경향을 조사하였다. 조사 결과 유역면적이 $100km^2$ 이상으로써 상류에서 하류방향으로 유역이 중첩되면서 증가하는 비독립적인 유역들의 경우 유역면적이 증가함에 따라 유출계수가 작아지거나 커지는 어떠한 경향을 보였다. 하지만 유역면적이 $100km^2$ 이하로써 독립적인 소유역의 경우 유역면적이 증가함에 따라 유출계수는 무작위로 분포되었다. 이것은 비독립적인 유역의 경우에는 호우가 홍수에 어떠한 일관된 영향을 미치나 각각 독립된 소유역의 경우에는 일관된 영향을 미치지 않음으로써 지역화방법에 의한 독립된 인근 미계측유역의 유출추정은 그 신뢰성이 높지 않다는 것을 의미한다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.24 no.6
• /
• pp.483-494
• /
• 2022

Owing to the saturation of ground spaces in downtown areas, underground spaces are being developed increasingly. Underground spaces are utilized for transportation, water supply and sewerage, communication zones, electric power zones, and various cultural complexes. In Korea, for excavating underground spaces, blasting methods using gunpowder such as the New Austrian Tunneling Method (NATM) are mainly used. However, the blasting method causes vibration and noise during tunnel excavation, generating many complaints from residents in the vicinity of the excavation site. To address this problem, various methods have been developed, and recently, vibration and noise have been reduced using deep excavation. This study predicts blast vibration changes according to the depth, under the same blasting and tunnel conditions, using numerical analysis based on the blast vibration measurement data of the GTX-A route, the tunnel cross-section drawings, and ground investigation reports. Furthermore, the necessary separation distance from densely populated areas such as residential areas is suggested by analyzing the trend of decreasing blast vibration according to the distance from ground surface directly above the blasting location.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.24 no.7
• /
• pp.945-952
• /
• 2018

Recently, bass fishing has become a marine leisure sport in Korea. There are 4 major fishing associations in Korea, and each association holds 10-15 tournaments each year. However, supply of 17 ft bass boats, which are preferred in leagues, depends 100 % on imports. In this study, we have derived the main specifications to develop the initial hull forms of a 18.5ft bass boat through statistical analysis based on mothership data. In addition, CFD numerical analysis was carried out according to deadrise angle and longitudinal center of gravity, which strongly influenced the resistance and planing performance. For numerical analysis, design speed was set to $Fn=3.284 (Re=9.858{\times}10^7)$, the deadrise angle was set from 12 to $20^{\circ}$, and the longitudinal center of gravity was set in the range of 0 to $8%L_{wL}$ from the center of buoyancy to the stern. Based on the numerical results, we first set the range of these factors by resistance performance and immersion keel length. Furthermore, using a correlation graph of Savitsky's Drag-Lift ratio, we derived the deadrise angle ($14-16^{\circ}$) and longitudinal center of gravity ($4-6%L_{wL}$).

• Journal of agriculture & life science
• /
• v.52 no.6
• /
• pp.103-109
• /
• 2018

The performance of drip irrigation devices depends on flow uniformity related to the function of pressure compensation. The flow uniformity can be secured when the internal fluid pressures at the positions of the flow holes are maintained uniformly. The pressure compensation effect of the drip irrigation devices can be optimized with the combination of soft silicon and labyrinth structures. However, for a drip irrigation devices composed of only hard labyrinth structures, the flow rate is changed largely with the length and the internal geometry of the labyrinth structure. Although a drip irrigation devices with only hard labyrinth structures can be fabricated simply, the changes of flow rates with internal fluid pressures are much larger than those of the drip irrigation devices with soft silicon. Because the drip irrigation devices with only labyrinth structures can be utilized widely through the optimization of the fluid pressure, the length of the structures, and the cross-sectional area of them, the study on the optimization can play an important role for enhancing the performance of the drip irrigation devices. In this study, experimental and numerical studies for investigating the performance of the drip irrigation devices had been conducted. In the experiments and numerical calculations(CFD), the variable parameters were the lengths of the labyrinth structures(#1~#8) and the fluid pressures(0.5~3.0 bar).

• The Journal of Engineering Geology
• /
• v.29 no.2
• /
• pp.137-151
• /
• 2019

Geophysical exploration techniques are effective for monitoring changes in the ground condition around the excavation project to prevent subsidence risks during excavation work, therefore, improving analysis techniques is required for applying and supplementing various geophysical exploration technologies. In this study, a field-scale on-site test was conducted to detect possible ground subsidence hazards and areas of relaxation zone that may occur during excavation work and due to underground water level changes. In order to carry out the field test, a real-scale excavation test bed was constructed and the geophysical exploration methods, such as electrical resistivity survey and multi-channel analysis of surface wave (MASW) survey for urban sites condition, have researched for optimal geophysical exploration parameter, design and correlation analysis between the results by reviewing the validity of each individual geophysical exploration and modeling. The results of this study showed the impact of each geophysical exploration on the relaxation zone and, in particular, the location of the underground water surface and the effects of excavation were identified using electrical resistivity survey. Further research on modeling will be required, taking into account the effects of excavation and groundwater.

• Korean Chemical Engineering Research
• /
• v.59 no.2
• /
• pp.209-218
• /
• 2021

First principle-based modeling studies have been performed to improve the heat exchange efficiency of ORV and optimize operation, but the heat transfer coefficient of ORV is an irregular system according to time and location, and it undergoes a complex modeling process. In this study, FNN, LSTM, and AutoML-based modeling were performed to confirm the effectiveness of data-based modeling for complex systems. The prediction accuracy indicated high performance in the order of LSTM > AutoML > FNN in MSE. The performance of AutoML, an automatic design method for machine learning models, was superior to developed FNN, and the total time required for model development was 1/15 compared to LSTM, showing the possibility of using AutoML. The prediction of NG and seawater discharged temperatures using LSTM and AutoML showed an error of less than 0.5K. Using the predictive model, real-time optimization of the amount of LNG vaporized that can be processed using ORV in winter is performed, confirming that up to 23.5% of LNG can be additionally processed, and an ORV optimal operation guideline based on the developed dynamic prediction model was presented.

• Journal of the Korean Geosynthetics Society
• /
• v.19 no.4
• /
• pp.21-32
• /
• 2020

As the global large-scale infrastructure construction market expands, the construction of civil engineering structures in extreme environments such as cold or hot regions is being planned or constructed. Accordingly, the construction of the pile foundation is essential to secure the bearing capacity of the upper structure, but there is a concern about loss of stability and function of the pile foundation due to the possibility of ground deformation in extreme cold and hot regions. Therefore, in this study, a new type of pile foundation is developed to respond with the deformation of the ground, and the ground deformation that can occur in extreme cold and hot region is largely divided into heaving and settlement. The new type of pile foundation is a form in which a cylinder capable of shrinkage and expansion is inserted inside the steel pipe pile, and the effect of the cylinder during the heaving and settlement process was analyzed numerically. As a result of the numerical analysis, the ground heaving caused excessive tensile stress of the pile, and the expansion condition of the cylinder shared the tensile stress acting on the pile and reduced the axial stress acting on the pile. Ground settlement increased the compressive stress of the pile due to the occurrence of negative skin friction. The cylinder must be positioned below the neutral point and behave in shrinkage for optimum efficiency. However, the amount and location of shrinkage and expansion of cylinder must comply with the allowable displacement range of the upper structure. It is judged that the design needs to be considered.

• Journal of Conservation Science
• /
• v.38 no.3
• /
• pp.201-216
• /
• 2022

Materials and techniques used for two portraits (Jo-nyeon Lee and S ung-in Lee) of the Lee family from Seongju enshrined in Seongsan temple were scientifically analyzed, and based on the data, an optimal replica restoration method was designed. According to the expression technique investigation, both portraits were expressed mainly in line drawing, but there were differences in shoes, pupils, the color expression of flesh, overpainting, and traces of reinforcement. Pigment analysis revealed that a mixture of cinnabar and minium, organic pigment, azurite, malachite, lead white, and yellow pigment were used in common. In the case of Sung-in Lee's portrait, seokganju and atacamite were also used. In addition, comparison with the contemporaneous portraits of gentry showed that the portrait style at the time was found in the two portraits, but the singularity was modified differently there. Based on the scientific analysis, it was decided to replicate the old color restoration for Jo-nyeon Lee's portrait while for Sung-in Lee's portrait, it was decided to replicate the phenomenon. Detailed coloring techniques were presented by supplementing the expression techniques that are difficult to confirm visually using scientific data. In addition, by measuring the chromaticity of representative positions in the portrait for each color and presenting the color reference value calculated as the average value, the current color of the artifact can be replicated and restored based on the objective data as much as possible.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.245-245
• /
• 2022

최근 국내 기후변화에 따른 국지성 집중호우로 인한 시간당 강우량의 증가로 도로부 유출량의 증가와 배수관거에서의 내수배제 불량에 따른 도심지 내수침수 피해가 증가함에 따라 이를 해결하기 위한 우수유출저감시설이 설치되고 있다. 그러나 대단위의 지하 저류시설의 지속적인 설치는 과밀화된 도심지에서 설치 지하공간의 구조적인 한계 및 적정 설치 위치의 미확보 등의 다양한 문제가 발생하여 저류시설의 침수저감 효과에 대한 추가적이고 새로운 저류시설에 대한 연구가 필요한 실정이다. 이에 내수 침수 저감 및 배수 능력 향상을 위한 도로 배수시설과 연계된 도로 측구부 저류시스템 구축이 필요하다. 이를 위해 역류 방지 및 노면수 저류 빗물받이에 적용되는 부력식 역류차단장치를 개발하였으며, 역류차단장치의 최적 형상 개발을 위해서 기존 빗물받이 연결관과의 통수능 비교 및 분석이 필요한 실정이다. 따라서 본 연구에서는 기존 빗물받이 연결관 및 연결관 내에 역류차단장치가 적용된 역류차단 빗물받이의 흐름분석을 위해 Fluent 모형을 이용하여 3차원 수치모의를 수행하였다. 수치모의 구성으로는 전체 형상을 40×50cm의 빗물받이 유입부와 50×50cm의 빗물받이로 결정하고 격자는 빗물받이 내부의 복잡한 3차원 흐름을 모의하기 위해 1.2~2mm 크기로 생성하였다. 다상유동 해석을 위해 VOF(Volume of Fluid)방법을 적용하였고, 수치해석 방법으로는 비정상류, 난류 모형으로는 SST k-𝜔모형을 적용하였다. 해석조건으로는 김정수(2021) 등이 제시한 4차선 기준 설계빈도별(5~30년) 빗물받이 유입유량을 산정하여 빗물받이 유입조건으로 선정하였으며, 빗물받이와 연결관에서의 통수능력 분석 조건으로는 빗물받이에 기존 연결관이 부착된 조건과 연결관 내에 역류차단장치가 설치되어 역류차단장치가 개방된 조건에서의 통수능을 비교하였으며, 역류상황을 가정한 연결관에서의 통수능을 비교하기 위하여 역류차단장치의 개폐정도를 15도(통수단면 33%감소) 닫힌 상태 및 30도(통수단면 67% 감소) 닫힌 상태 조건을 대상으로 빗물받이와 연결관에서의 흐름을 모의하였다. 수치모의 결과 역류차단장치의 계폐조건에 상관없이 5년 빈도유입량 조건에서는 완전 배수가 되었으며, 개폐조건 15도에서는 10년 빈도의 유입량에서는 완전 배수가 되었으나 20년 빈도 이상의 유입량 조건에서 빗물받이 유입부로의 역류가 발생하였으며, 개폐조건 30도에서는 5년 빈도 이상 유입량 조건에서 빗물받이 유입부로 역류가 발생하는 것으로 나타났다. 특히, 30년 빈도 이상의 유입량부터는 빗물받이 연결관 내에 역류차단장치 개페조건과 관계없이 빗물받이 유입부로의 역류로 인한 도로 침수가 발생하기 때문에 유휴공간인 도로 측구부를 저류공간으로 활용할 수 있는 도로 측구부 저류시스템의 구축은 필수적이라고 판단되며, 유량 조건에 따른 빗물받이 내부 와 흐름과 유출부에서의 유속 변화 특성을 확인하였다. 그러므로 측구 저류조 개발 형상과 연결한 3차원 흐름의 구현 및 분석에 Fluent 모형의 적용이 가능하다고 판단된다.

• Explosives and Blasting
• /
• v.41 no.3
• /
• pp.62-72
• /
• 2023

The aging of plant structures due to industrialization in the 1970s has increased the demand for blast demolition. While blasting can reduce exposure to environmental pollution by shortening the demolition period, improper blasting design and construction plans pose significant safety risks. Thus, it is vital to consider optimal blasting demolition conditions and other factors through collapse behavior simulation. This study utilizes a 3-D combined finite-discrete element method (FDEM) code-based 3-D DFPA to simulate the collapse of a chimney structure in a thermal power plant in Seocheon, South Korea. The collapse behavior from the numerical simulation is compared to the actual structure collapse, and the numerical simulation result presents good agreement with the actual building demolition. Additionally, various numerical simulations have been conducted on the chimney models to analyze the impact of the duct size in the pre-weakening area. The no-duct, duct, and double-area duct models were compared in terms of crack pattern and history of Z-axis displacement. The findings show that the elapse-time for demolition decreases as the area of the duct increases, causing collapse to occur quickly by increasing the load-bearing area.