• Journal of the Institute of Electronics Engineers of Korea TE
• /
• v.39 no.1
• /
• pp.65-70
• /
• 2002

In this thesis, we realized tracking system for the purpose of receiving performance improvement of KOREASAT's signal in Korea peninsula. Using Scan-mode antenna point out receivable area without position information sensor and using step-track algorithm reach to peak level. Furthermore, the performance of the completed system was verified by physical experiments that directly receives satellite signal. And decided the optimal size of steps for tracking speed and structure of the system by reiterative approach experiments.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1998.06a
• /
• pp.59-66
• /
• 1998

교통정보와 DGPS(Differential GPS) 보정신호의 전송은 ITS(Intelligent Transport System)의 핵심 응용분야인 차량항법시스템(CNS : Car Navigation System)의 동적경로안내(Dynamic Routine Guidance System) 시스템의 핵심적인 요구사항이다. 이 정보들은 서비스 특성상 넓은 지역을 수신지역으로 하고 24시간 연속적으로 전송이 되어야 한다. 즉 주행주인 차량에서 자신의 위치 정확히 파악하기 위한 DGPS 보정신호 및 사고, 교통통제나 체증 등의 교통사항을 항상 수신할 수 있도록 항시 전송이 되어야 한다. FM 방송을 활용하여 이러한 요구사항을 충족시키는 전송채널로 활용될 수 있음을 확인하기 위해 FM 방송과 DARC 방식의 부반송파 시뮬레이터가 제작되었으며 이 시스템의 특성이 연구되었다. 또한 정보데이터를 현용 FM 방송설비를 이용하여 전송하기 위한 방송시스템을 제작하고 서울 및 경기도 지역을 수신지역으로 한 방송수신상태의 측정이 수행되었다. 이 결과들은 FM 부반송이 ITS를 위한 전송채널로서 활용될 수 있다는 것을 보여준다.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.204-206
• /
• 2022

eLoran 시스템에서 보다 높은 정확도로 시각 및 위치 정보를 제공하기 위해 별도의 데이터 채널인 Loran Data Channel (LDC)를 사용한다. LDC 메시지는 기존의 8개의 Loran 펄스 중 항법에 사용하지 않는 3-8번째 펄스의 전송시각을 변조하여 송출하는 Eurofix 방식과 9번째 추가 펄스를 이용해 데이터를 변조하는 9^th 펄스 방식으로 변조될 수 있다. 본 논문에서는 eLoran 송신국에서 송출하는 LDC 메시지의 변조방법에 따른 수신 성능을 분석한다. 인천에서 운영 중인 eLoran 시험 송신국에서 9^th 펄스 변조방법과 Eurofix 변조방법으로 동시에 LDC 메시지를 송출할 수 있도록 설정하고, 인천과 평택의 eLoran 보정기준국의 데이터베이스 내 저장된 LDC 메시지를 분석해 변조방법에 따른 LDC 메시지 수신률을 분석한다. 또한 항로표지 관리선 인성 1호를 이용해 인천항 인근에서 실제 사용자의 LDC 메시지 수신률을 분석하였다. 본 연구결과는 eLoran 시범서비스 이후 본격적인 서비스 과정에서 중요하게 활용될 것으로 기대된다.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2011.07a
• /
• pp.130-132
• /
• 2011

본 논문은 지상파 방송망 내 전계강도가 낮은 지역에 최소한의 데이터 전송률을 보장하기 위한 계층변조와 다중경로 채널 극복 및 수신 성능 향상을 위한 다중 안테나 수신기법을 SFN에 적용하여 제안하였다. 계층변조는 기존의 데이터 스트림에 부가적인 데이터 스트림을 삽입함에 따라 지상파 3D HDTV 방송 서비스는 더 많은 유효 전송률을 확보하고 고품질 비디오 서비스를 제공할 수 있었다. 그러나 기본 서비스의 품질을 유지하면서 부가적인 서비스의 품질을 보장하기 위한 대책이 필요하다. 그래서 송, 수신 안테나의 이득을 올리기 위해 다중 안테나 사용 방식을 채용하고, 그 수신 성능을 다중 안테나 위치에 따라 비교해 보았다. 그 결과, 수신 안테나가 한 쪽의 송신 안테나에 가까워질수록 실질적인 SNR이 증가하여 BER 성능이 향상되는 것을 확인하였다.

• Proceedings of the KSRS Conference
• /
• 2007.03a
• /
• pp.192-197
• /
• 2007

한국해양연구원에서는 2008년 으 로 예정된 통신해앙기상위성(통해기)의 발사에 맞춰 통해기에 탑재된 해색센서(GOCI)자료의 수신，처리，배포를 위한 해앙위성센터 구축을 진행하고 있다. 전파수신환경，자연환경 등을 고려하여, 해양위성센터 위치를 안산(한국해양연구원 본원)으로 정하였다. 이에 따라，지금까지 안테나를 포함한 수신시스템에 대한 상세설계，내부 구조 변경，H/W 및 N/W 설계，자료처리 시스템 일부의 도입을 실시하였다. 여기에서는，해양위성센터 구축 현황을 소개하고，해색센서(GOCI)자료의 수신，처리，배포 시스템 설계 결과를 소개하고자 한다. 가장 중요한 자료 배포 시스템은 기본적으로 온라인으로 구성되며, 수신된 데이터를 1시간 내에 제공하기 위해 웹호스팅 등 외부데이터 제공 시스템도 구축하는 것을 구상 중에 있다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.45 no.10
• /
• pp.17-28
• /
• 2008

Rapid transmission of packets is important in mobile ad hoc networks. Therefore, a flooding algorithm which can guarantee a short delay is useful in various ways of packet transmission. Flooding algorithm is one of the packet transmission methods that broadcasts a packet to all nodes within a transmission range. It does not rebroadcast the same packet which is already received from other nodes. Basically, flooding algorithm's advantages are that it simply writes an address and a sequence number in a packet, and it can be adapted for topological changes easily. However, the basic flooding algorithm has a shortcoming that causes excessive traffic because all nodes transmit a packet at least once. To solve this problem, research about flooding algorithms that constrains duplicated transmission of packets based on probabilistic and geographical information is going on. However, the existing algorithm cannot guarantee short delay and low traffic. To reduce a delay, in this paper we propose a flooding scheme where a node which receives a broadcasted packet chooses and allocates a priority to one of its neighbor nodes and then the node transmits the packet promptly to the node to whom the priority was given. Moreover, we propose a totally fresh a roach to constrain duplicated transmission by searching a node that already received the same packet by using node's geographical position information. Lastly, we compare the performance of the proposed algorithm with the existing algorithm through simulation. The results show that the proposed algorithm can distribute packets through a lower number of total packet transmissions and faster delivery time than the existing algorithm.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.11 no.3
• /
• pp.23-30
• /
• 2011

In the wireless sensor network(WSN), the detection of precise location of sensor nodes is essential for efficiently utilizing the sensing data acquired from sensor nodes. Among various location methods, the received signal strength (RSS) based localization scheme is mostly preferable in many applications since it can be easily implemented without any additional hardware cost. Since the RSS localization method is mainly effected by radio channel between two nodes, outlier data can be included in the received signal strength measurement specially when some obstacles move around the link between nodes. The outlier data can have bad effect on estimating the distance between two nodes such that it can cause location errors. In this paper, we propose a RSS-based localization method using Robust Statistic and Gaussian filter algorithm for enhancing the accuracy of RSS-based localization. In the proposed algorithm, the outlier data can be eliminated from samples by using the Robust Statistics as well as the Gaussian filter such that the accuracy of localization can be achieved. Through simulation, it is shown that the proposed algorithm can increase the accuracy of localization and is more robust to non gaussian noise channels.

• Journal of Broadcast Engineering
• /
• v.23 no.1
• /
• pp.154-161
• /
• 2018

As the number of smartphone users increases, research on indoor location recognition service is necessary. Access to indoor locations is predominantly WiFi, Bluetooth, etc., but in most quarters, WiFi is equipped with WiFi functionality, which uses WiFi features to provide WiFi functionality. The study uses the random forest algorithm, which employs the fingerprint index of the acquired WiFi and the use of the multI-value classification method, which employs the receiver signal strength of the acquired WiFi. As the data of the fingerprint, a total of 4 radio maps using the Mac address together with the received signal strength were used. The experiment was conducted in a limited indoor space and compared to an indoor location recognition system using an existing random forest, similar to the method proposed in this study for experimental analysis. Experiments have shown that the system's positioning accuracy as suggested by this study is approximately 5.8 % higher than that of a conventional indoor location recognition system using a random forest, and that its location recognition speed is consistent and faster than that of a study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2463-2470
• /
• 2010

In some cases of u-health services, it is important and then required to pursue the location of users in real time because users could occasionally be in the situation beyond self-regulation. Location positioning has used two such typical techniques as trilateration and fingerprinting. A trilateration technique is usually based on three resident coordinates to identify the location of the target node. Ranging that measures distances between coordinates and the node is essential for applying the trilateration technique. Users especially in u-health services could be out of reachability in any such reasons as out of propagation ranges, fault of a communication counterpart, non-existence of possible communication facility, etc. This paper proposes a real-time locating method which can improve to identify and track the location of mobile objects. The method is based on references of identified mobile nodes as well as resident coordinates even though they may be partially out of communication reachability.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2177-2184
• /
• 2012

A different and effective method for indoor positioning system is needed and increased it's importance compare to the outdoor GPS based method. The FingerPrint positioning method is known as a superior method in indoor positioning system that maintains signal strength patterns for RPs(Reference Points) in database and compare the DB with the measured real-time signals on the mobile device. FingerPrint positioning method is necessary to establish an accurate database, but errors can occur by several factors. In this paper, we analyze the signal patterns of each terminal in accordance with connection state of access point and trace that the error in accordance with connection state of access point can be an important error in FingerPrint DB configuration through an experimental case study.