• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.3
• /
• pp.13-18
• /
• 2015

This paper proposes an optimum vision system analysis and a reliable high-precision positioning system that converges a GNSS and a vision system in order to resolve position error and outdoor shaded areas two disadvantages of GNSS. For location determination of the object, it should receive signal from at least four GNSS. However, in urban areas, exact location determination is difficult due to factors like high buildings, obstacles, and reflected waves. In order to deal with the above problem, a vision system was employed. First, determine an exact position value of a target object in urban areas whose environment is poor for a GNSS. Then, identify such target object by a vision system and its position error is corrected using such target object. A vehicle can identify such target object using a vision system while moving, make location data values, and revise location calculations, thereby resulting in reliable high precision location determination.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.5B
• /
• pp.370-376
• /
• 2012

The CSS(Chirp Spread Spectrum) technology is used for developing various WPAN(Wireless Personal Area Network) application fields in general, and it can be adapted to implement localization systems especially using SDS-TWR(Symmetric Double Sided - Two Way Ranging). But the ranging errors are occurred in many practical applications due to some interferences by some experiments. Thus, the compensation algorithm for localization is required for developing localization applications. The suggested compensation algorithm that is named KF_EDR(Kalman Filter and Equivalent Distance Rate) for localization in order to reduce the ranging errors is suggested in this paper. The KF_EDR compensation algorithm for localization is mainly composed of the AEDR(Algorithm of Equivalent Distance Rate) and the Kalman Filter. It is confirmed that the improved error ratio of the KF_EDR are 10.5% and 4.2% compared with the AEDR algorithm in lobby and stadium. From the results, it is analyzed that the KF_EDR can be widely used for some localization system in ubiquitous society.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.2C
• /
• pp.112-118
• /
• 2011

In this paper, we conduct an objective performance analysis of the crosstalk cancellation scheme studied in [11]. While the conventional scheme is only applicable to a listener on the optimal listenable region (sweetspot), the space skew/crosstalk cancellation (SS/CC) scheme in [11] can mitigate crosstalk regardless of the listener's position by using listener position tracking (LPT) system. The SS/CC scheme is composed of two parts: LPT-based SS and CC parts. In this paper, the SS/CC scheme is evaluated by some criteria such as follows: condition number, and the balance characteristic, its root mean square error, and running average.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1199-1205
• /
• 2001

There has been an increase in the public concern about possible health risks by electromagnetic exposure from mobile phones. Recently, several SAR measurement procedures have been proposed to demonstrate the compliance of mobile phone with safety limits. To determine the maximum localized SAR of a test mobile phone, the electric field distribution is measured in the head phantom with simulated tissue liquid using the probe The important parameters in SAR measurement are the E-field probe, the shape and size of phantom, the electrical parameters of simulated tissue liquid, and test position, etc. Therefore, in order to setup the measurement standard, the studies on these factors are required. In this paper, the effects of the maximum localized SAR on the test positions of mobile phones were analyzed by the numerical computation and the SAR measurement. From the results, the worst condition of commonly used positions was determined and the touch and tilted positions were adopted as test positions of the domestic SAR measurement standard.

• The Journal of the Korea Contents Association
• /
• v.7 no.4
• /
• pp.56-65
• /
• 2007

For supporting seamless service in NGN, various schemes for mobility are studying in ITU-T, 3GPP, IETF, and so on. Currently, mobility support schemes such as MIPv6, IP2, Q.MMF, IMS was introduced. However the performance analysis and comparison of all existing schemes is not examined as yet. That is, the existing mobility methods need to be compared according to same performance parameter. So, in this paper, we investigate and compare the performances of MIPv6, IP2, Q.MMF on latency during location registration. The latency in location registration is consider as cost and time. Then, the performance analysis of Q.MMF Case1 has shown the best performance as it is measured the minimum cost and time. Q.MMF Case1 is the location registration process in case that MT moves within a local network. As LLM in a access network manages the location of MT in this case, Q.MMF Case1 has lower location cost and time than other cases.

• International Journal of Highway Engineering
• /
• v.9 no.2 s.32
• /
• pp.27-37
• /
• 2007

This research was conducted to determine the optimum lifting positions on precast concrete slabs for precast concrete pavement construction, based on the analysis of concrete stress distribution under various lifting conditions. To analyze stresses in concrete slabs, the finite element method was implemented and a numerical model of the precast slab that was going to be used in the experimental construction was developed. Changes in the stress distribution due to the lifting angle were investigated because slab lifting is not always performed in the perpendicular direction to the slab surface. In addition, the effect of the lifting level, the distance between the neutral axis of the slab and the lifting point, on the stress distribution was investigated since the lifting point is not always at the neutral axis of the slab. To consider the actual steel design of the precast slab, the effect of the reinforcement near the lifting point was also investigated. From this study, the optimum lifting positions of the precast slabs were determined according to the lifting angle and level, and the results were compared with the lifting positions used in the PCI standards.

• The KIPS Transactions:PartD
• /
• v.12D no.7 s.103
• /
• pp.1017-1022
• /
• 2005

There are many changes in the software requirements during the whole software life cycle. These changes require modification of the software, and it is important to keep software quality and stability while we are modifying the software. Refactoring is one of the technology to keep software quality and stability during the software modification; there are many researches related to automatic refactoring. In this paper, we propose three factors for Move Method which is one of the refactoring technique. We applied binomial logistic analysis to data which were extracted from sample program by each factor. The result of this process was very close to the result of manual analysis by program experts. Furthermore, we found that these factors have major roll to determine Position of a method, and these factors can be used as a basis of finding optimal position of a method.

• The Journal of the Acoustical Society of Korea
• /
• v.23 no.1
• /
• pp.40-46
• /
• 2004

The equivalent source method (ESM) uses two groups of equivalent source positions. One group includes the first order images of the sound source inside the enclosure. The positions of the other group are usually on a spherical surface some distance outside the enclosure. A proper selection of the positions for the far field sources could greatly improve the performance of the modeling accuracy and reduce the number of the sources to achieve the required accuracy. This study uses optimally distributed far field source positions on the surface of enlarged version of the rectangular enclosure instead of using typical spherical distribution. Simulations using various sizes of the box shaped distribution are executed and optimal positions are searched using an optimization technique from the larger number of candidate positions. The results of using these far field source positions are compared and analyzed.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1996.06a
• /
• pp.169-174
• /
• 1996

객체 인식은 대용량의 영상 데이터를 분석, 탐색하고 재구성하기 위한 내용기반 영상 검색의 매우 중요한 분야이며, 특히 인간의 얼굴은 검색 영상 내에서 대부분 주요한 장면에 위치하고 있기 때문에 그 비중이 매우 크다. 본 논문에서는 내용기반 영상 검색을 위한 실시간 얼굴 영역 추출 방법을 제안한다. 제안된 방법에서는 다층 피라미드 구조와 간단한 형태의 머리 형판을 사용하여 얼굴의 후보 영역을 추출한 후, 보다 정확한 얼굴 영역을 추출하기 위하여 후보 영역 내에서 눈의 위치를 탐색하고, 두 눈의 위치를 기준으로 최종적인 얼굴 영역을 추출하였다. 얼굴 후보 영역 추출 단계에서는 얼굴의 형태 정보를 포함하고 있는 모자이크 형판을 사용하여 머리와 턱을 포함한 얼굴 영역을 추출하였으며, 눈 위치 추출 단계에서는 눈의 위치 정보를 사용하여 눈의 탐색 영역을 결정하고, 탐색 영역 내에서 이진 영상 형판을 사용하여 눈의 위치를 추출한 후, 눈 영역의 무게 중심을 눈의 중심 위치로 설정하였다. 마지막 얼굴 영역 추출단계에서는 두 눈의 위치를 기준으로 사각형의 영역을 얼굴 영역으로 추출하였다. 제안된 방법의 성능을 검증하기 위하여 1700장의 다양한 영상에 대하여 실험하였으며, 실험 결과 한 장의 영상에서 얼굴 영역을 추출하는데 있어서, Pentium 166Mz의 PC상에서 평균 3.2초의 처리 속도와 91.7%의 추출률을 보임으로써, 실시간 얼굴 영역 추출에 매우 효과적임을 알 수 있었다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.31 no.9
• /
• pp.75-81
• /
• 2003

The longitude and latitude of a geosynchronous satellite are not defined as a point in space because of various external perturbations. To perform the missions of a satellite for a communication and broadcasting, the satellite must be positioned within a predefined station keeping box in given limited space longitude. In this study, we propose east-west station keeping box larger than that of north-south station. By using the derived error equation, we verified the Koreasat station keeping box allocation by assuming one week and two weeks of station keeping cycle.