• The Bulletin of The Korean Astronomical Society
• /
• v.37 no.2
• /
• pp.191.2-191.2
• /
• 2012

저궤도 위성을 설계함에 있어 시스템 수준에서 수행하는 질량특성의 계산은 위성을 구성하는 각각의 구성품에 대한 정보를 종합하여 전체 시스템의 특성을 예측하는 작업이다. 질량특성에 대한 요구조건은 발사체로부터 설정되는데 요구조건 항목은 탑재체질량, 무게중심 그리고 관성모멘트에 관한 것이다 또한, 자세제어면에서 추력에 의한 토크에 따른 무게 중심 등이며 최근 위성의 고기동화 요구에 따라 기동요구조건 및 자세구동장치의 용량에 따라 결정된다. 특히 위성의 궤도형상 관성모멘트는 위성 동특성을 표시하므로 이를 사용하여 제어시뮬레이션을 수행하는 자세제어계에 주요 입력 데이터로 활용된다. 본 논문에서는 저궤도 위성의 질량특성 요구조건을 검증하기 위해 수행한 질량특성 예측과 질량특성 측정 시험에 대해서 기술하고자 한다.

• Journal of Satellite, Information and Communications
• /
• v.11 no.3
• /
• pp.104-109
• /
• 2016

A technology of GEO satellite communications starts from Koreasat program in Korea. Payload equipment of EQM Ku and Ka band transponders had been developed and space-qualified Ka band payload in COMS was successfully launched in June, 2010. For the purpose of military communications, Dehop-Rehop transponder was developed in Koreasat5 as ANASIS system and DAT(Digital Active Transponder) and DCAMP(Digital Channel AMPlifier) transponders are now under development. In this paper, from the study of military satellite communications trend, a direction of military communication satellite is suggested based on the current GEO SATCOM technologies in Korea. Considering the limit of frequency resources, a technology of battlefield adaptive transponder with medium capacity against high moveable jamming tactics would be efficient for the future military SATCOM system. Mid-sized military satellites with frequency hopping and mid-capacity transponders can be a solution of vitalizing the GEO satellite programs.

• Journal of Aerospace System Engineering
• /
• v.7 no.2
• /
• pp.1-7
• /
• 2013

Recently, there are a number of studies over dynamic analysis for minimizing vibration of flexible structures such as solar panel for agility of high-agility satellite. The traditional studies perform dynamic analysis of a solar panel assumed as rigid structure since the stiffness of solar panel is higher than the stiffness of solar panel's hinge spring. However, there are vibrations that have modes of bending and torsion when high-agility satellite rotate speedily. This vibrations result in delaying safety time of satellite or degrading image quality. This paper presents dynamic analysis's technique of satellites including the spring hinge of solar panel and flexible structural solar panel's effects described as the linear equation of motion using Lagrange's theorem, and verifies the validity of an established dynamic analysis's technique of satellites by comparing the finite element method. In addition high-agility satellite's dynamic characteristics of a torque profile are analyzed from the established dynamic analysis's technique of satellites.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.5
• /
• pp.355-361
• /
• 2020

Among these satellites, low - orbit small satellites with military characteristics require multi - target observation, and demand for high-resolution photographs and images is increasing. Fast maneuverability is the most important factor for high-resolution images and multi - target observations. However, in the case of a small satellites, it is possible to perform the attitude maneuver if it has high speed, but the residual vibration occurs when the attitude maneuver is completed and the next attitude maneuver is completed. In this study, to verify the vibration characteristics of the plate generated after attitude maneuver, an experimental fixture for simulating the attitude maneuver was fabricated and tested. In addition, Eddy Current Damper (ECD) using Eddy Current Brake system (ECB) is proposed as a passive damping method using permanent magnet to reduce vibration. A mathematical model was established to apply ECD and it was experimentally implemented according to the magnetic flux density and the air gap of the permanent magnet. One plate of four solar panels (plate) was specified, the residual vibration reduction performance after the test was verified experimentally.

• Journal of Advanced Navigation Technology
• /
• v.25 no.1
• /
• pp.68-77
• /
• 2021

In this paper, a GPS/MEMS IMU integrated navigation receiver module capable of operating in a high dynamic environment is designed and fabricated, and the results is confirmed. The designed module is composed of RF receiver unit, inertial measurement unit, signal processing unit, correlator, and navigation S/W. The RF receiver performs the functions of low noise amplification, frequency conversion, filtering, and automatic gain control. The inertial measurement unit collects measurement data from a MEMS class IMU applied with a 3-axis gyroscope, accelerometer, and geomagnetic sensor. In addition, it provides an interface to transmit to the navigation S/W. The signal processing unit and the correlator is implemented with FPGA logic to perform filtering and corrrelation value calculation. Navigation S/W is implemented using the internal CPU of the FPGA. The size of the manufactured module is 95.0×85.0×.12.5mm, the weight is 110g, and the navigation accuracy performance within the specification is confirmed in an environment of 1200m/s and acceleration of 10g.

• Journal of Aerospace System Engineering
• /
• v.18 no.1
• /
• pp.1-10
• /
• 2024

In a previous study, a structure of a superplastic yoke consisting of a thin FR4 layer laminated with viscoelastic tape on both sides of a shape memory alloy (SMA) was proposed to reduce residual vibration generated by a deployable solar panel during high motion of a satellite. Damping properties of viscoelastic tapes will change with temperature, which can directly affect vibration reduction performance of the yoke. To check damping performance of the yoke at different temperatures, free damping tests were performed under various temperature conditions to identify the temperature range where the damping performance was maximized. Based on above temperature test results, this paper predicts temperature of the yoke through orbital thermal analysis so that the yoke can have effective damping performance even if it is exposed to an orbital thermal environment. In addition, the thermal design method was described so that the yoke could have optimal vibration reduction performance.