• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.17 no.1 s.104
• /
• pp.1-7
• /
• 2006

New phase shifters with higher phase shift values are presented using defected ground structures(DGSs). The varactor diodes are mounted on DGSs of termination loads to control the large phase variation of the DGS at resonance. Two types of phase shifters are implemented with a branch-line and a coupled line hybrid. The experimental results of the proposed phase shifters show $135\%$ and $221\%$ increases in maximum phase shills, respectively, compared with those of conventional ones.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.13 no.6
• /
• pp.1199-1206
• /
• 2018

The hybrid phase shifting device is consist of general phase shifter in sub-array and the true time delay inter sub-array. This configuration for phased shifting can efficiently improve the beam squint according to frequencies. However, when an appropriate array configuration is not selected, a gain variation of main lobe for a phased array antenna is occurred. In order to solve these problems, a simplified formula for constructing efficient array based on the system design requirements, such as the fractional bandwidth, the maximum beam steering angle, and limit criterion of the gain variation, was presented.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.2
• /
• pp.33-43
• /
• 2002

현대의 레이다나 통신 시스템에 있어 위상 배열안테나는 필수 구성요소이고 이러한 위상 배열 안테나에는 수 천개의 독립적인 위상제어기가 사용되어지고 있다. 따라서 대량생산이 가능하면서도 성능이 우수한 저손실, 저가격의 True-Time Delay (TTD)를 지원하는 위상천이기가 크게 요구되고 있는 실정이다. 최근 몇 년 동안 MEMS 공정을 이용한 저손실 RF 스위칭 소자와 가변 캐패시터가 성공적으로 개발되었으며 이러한 저손실의 MEMS 스위칭 소자를 이용한 위상천이기 구현이 가능하게 되었다. 본 논문에서는 크기나 전력소모, 삽입손실 등에서 우수한 고주파 특성을 갖는 RF MEMS (Micro-Electro Mechanical System) 스위치에 대해서 간략히 언급하고 이를 이용한 위상천이기와 기존의 위상천이기를 비교 분석하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.05a
• /
• pp.97-99
• /
• 2003

Novel asymmetric 45$^{\circ}$ Schiffman phase shifter having l-coupling for 2.3GHz applications is presented along with measurement results. The proposed phase shifter with a Teflon substrate is fabricated in a smaller area and cost-effective way as compared to the conventional Schiffman phase shifter. In addition, the characteristics of the fabricated phase shifter is extracted and compared. The proposed phase shifter seems useful particularly for the future 2.3GHz wireless applications.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.4
• /
• pp.401-412
• /
• 2003

In this paper, a broadband phase shifter structure using a new switched network was proposed. A new reference network is composed of coupled lines and 45$^{\circ}$open and short stubs, which are shunted at the edge points of a main line, respectively, A delay network is composed of only a standard transmission line. It is possible to design a broadband 180$^{\circ}$phase shifter that phase dispersive characteristics by an impedance ratio R of coupled lines and greater phase dispersive characteristics by characteristic impedances Zm, Zs of a main line and stubs are used together. By considering a structure symmetry, the even and odd mode analysis was performed to obtain theoretical S-parameters of the proposed phase shifter. Also, through computer simulation on the basis of derived equations, design graphs were presented to optimally design a 180$^{\circ}$broadband phase shifter. Design graphs provide the values of characteristic impedances Zm, Zs, and I/O match and phase bandwidths. To verify electrical performances of the broadband phase shifter proposed in this paper, low different 180$^{\circ}$phase shifters, operated at the center frequency 3 GHz were designed and fabricated using design graphs, and were experimented. One of them was designed as a standard Schiffman structure to compare with electrical performances. Measured results of each phase shifter to satisfy simultaneously design conditions of I/O match （VSWR=1.15:1) and maximum phase deviation $({\varepsilon}_{{\Delta}{\phi}}＝{\pm}2^{\circ})$ were well in agreement with corresponding simulation results over impedance match and phase error bandwidths, and showed broadband characteristics.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.9
• /
• pp.907-915
• /
• 2002

In this paper, a compact digital phase shifter to be used an active phased array antenna system for satellite communications was proposed. The even and odd mode analysis for a given reflection-type phase shifter, which uses a folded hybrid coupler as a base element, was performed and the design parameters were derived. Also, to verify experimentally the electrical performances of the proposed structure, X-band 4-bit digital phase shifter was designed and fabricated using Teflon soft substrate $({\varepsilon}_r; =\;2.17)$. Its circuit size was less than 3.5 cm $\times$ 3.0 cm, and it exhibited at least 50 % size reduction as compared with the conventional unfolded configuration. The experimental results of the fabricated phase shifter showed that the average insertion loss and insertion loss variation were less than 3.5 dB, $\pm$ 0.6 dB within the operating band, 7.9 ~ 8.4 GHz, respectively. And, input and output return loss were more than 10 dB, respectively. Also, the phase response of the phase shifter showed 4-bit operation with $\pm$3$^{\circ}$ rms phase error.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.657-666
• /
• 2002

In this paper, a new broadband phase shifter to adjust the slope of dispersive phase characteristic for frequency of transmission network was proposed. The new fundamental network consists of a fixed main line with a length of λ/2 at the center frequency and two double stubs, each with a length of λ/8 at the center frequency, which are open and shorted, respectively, and which are shunted at the edge points of the main line. Characteristic impedances of the main line and two parallel double stubs are adjusted to produce a minimum phase error and to obtain an input and output match at the desired phase shift. Especially, the proposed structure is especially suitable for a broadband phase shifter with large phase shifts more than 90$^{\circ}$, and it is operated in the octave bandwidth. To verify the usefulness of a new broadband phase shifter, each 45$^{\circ}$-, 90$^{\circ}$-, 180$^{\circ}$-bit phase shifter and 3-bit phase shifter(45$^{\circ}$-phase step), which is cascaded in series, operated at the center frequency 3 GHz were designed, fabricated and experimented. The measured results were in very close agreement with the corresponding simulation results over the bandwidth of I/O impedance match and phase error for each phase shift.

• Journal of the Institute of Convergence Signal Processing
• /
• v.14 no.1
• /
• pp.39-44
• /
• 2013

In this paper digital phase-shifter for multi-arm spiral antennas was designed by using Hilbert transform. All frequency components in input signal are phase-shifted for 90 degree by Hilbert transform, and the transform is implemented by FIT and IFIT. Digital phase-shifter generates two signals with phase difference of 90 degree by using Hilbert transform from input signals sampled by analog-digital converter(ADC), and then the input signal is phase-shifted for a given phase by using two signals. Hilbert transform based on digital phase-shifter is designed by Xilinx System generator, and the effects of input noise, FIT point, sampling period, initial phase of input signal, and shifted phase are simulated and its results are compared with Matlab results.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.4
• /
• pp.575-581
• /
• 2000

In this paper, a new active phase shifter is proposed using a vector sum method, and a unique digital phase control method of the circuit is suggested. The proposed scheme was designed and implemented using a Wilkinson power combiner/divider, a branch line 3 dB quadrature hybrid coupler and variable gain amplifiers (VGAs) using gate FETs(DGFETs). Furthermore, it was also shown that the proposed scheme is more efficient and works properly with the digital phase control method.

• Information and Communications Magazine
• /
• v.16 no.9
• /
• pp.28-41
• /
• 1999

위상배열 안테나 시스템에서 빔 제어 기술은 이동통신 및 위성통신시스템, 비행하고 있는 임의의 비행체의 위치를 고도의 정확도를 가지고 추적하는 군사용 레이더 시스템이나 항공사의 통신 시스템, 선박이나 차량간의 충돌을 방지하기 위한 충돌방지 시스템 등에서 널리 사용되고 있다. 이러한 위상배열 안테나 시스템에서 위상천이기를 이용하는 방법이 널리 사용되고 있다. 이 방법은 원리적으로 간단하지만 실제 구현할 때 위상천이기를 제어하기 위한 제어 신호와 DC 바이어스 라인들 그리고 전력분배기로 구성되어 있기 때문에 전체 회로가 복잡해진다. 뿐만 아니라 현재로서는 위상천이기의 가격과 삽입 손실 때문에 저렴하고 높은 이을 갖는 위상 배열 안테나 시스템을 구현하기가 힘들다. 본 논문에서는 위상천이기를 사용하지 않고 발진기들의 결합을 이용함으로써 이와 같은 단점을 극복하면서 배열 안테나의 복사 빔을 제어할 수 있는 결합발진기 배열 안테나의 최근 기술동향을 분석하고 여러 기술들의 장단점을 기술한다.