• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.6
• /
• pp.617-626
• /
• 2010

In this paper, we have proposed and experimentally performed a polarization and phase control method of an optical signal which has same wavelength with the optical carrier to improve phase characteristics of a continuous wave(CW) generated by the double sideband-suppressed carrier(DSB-SC) as one of the famous photomixing technique for making sub-millimeter and terahertz waves. A polarization and phase controlled optical signal has been coupled with the general DSB-SC on an optical coupler. The output of the optical coupler is then photomixed by a photomixer. From our analysis and measurement results, we have found that the amplitude of the generated sub-mm and terahertz CW signal is higher 1.5 dB and the phase noise is lower about 3 dB@10 kHz offset frequency than the general DSBSC. Consequently, since our proposed method has improved the amplitude and phase noise of CW signals in the sub-mm and terahertz bands, it can be helpful results to make low cost CW generator in sub-millimeter and subterahertz bands.

• Journal of Sensor Science and Technology
• /
• v.6 no.2
• /
• pp.95-105
• /
• 1997

A new open-loop signal processing technique of digital phase tracking is known to have a Potential to solve the problems in the open-loop processor such as limited dynamic range, dependence on the optical intensity fluctuations, and dependence on gain fluctuations of signal path. But new problems with digital phase tracking must be solved before it can be a useful signal processing method. In this paper, barriers to the success of the digital phase tracking such as harmonics content, phase difference, amplitude variations of the phase modulation(PM) signal, bandwidth limit of the signal path, and the implementation of the mixer, are pointed out and their effects on the performance of the signal processor are analyzed to calculate the requirements of the signal processor for $1{\mu}rad$-grade FOG.

• Journal of the Korean Institute of Telematics and Electronics S
• /
• v.36S no.11
• /
• pp.120-127
• /
• 1999

The dead time which is inserted in switching signals of PWM voltage source inverters distorts its output. As a result, the deviations of real fundamental voltage and phase compared with the reference are occurred. And also the harmonics on its output are increased. In this paper, numerical analysis of the distorted voltage on the output of inverter caused by switching dead time is performed. With the calculation results, the fundamental voltage gain and phase deviations according to the modulation index, load displacement factor and dead time are presented.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.9
• /
• pp.1840-1846
• /
• 2011

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sensing purpose such as detection of moving targets and weather surveillance. The signal amplitude in the beat frequency band is the important parameter in the detection and tracking of targets. However, strong clutter echoes do exist in most radar operation environments and the system phase noise spreads both the clutter and signal echoes of the target. In this paper, the effects of this system phase noise are analyzed concerning the clutter and the signal beat spectrum. It is shown that the separation capability of adjacent beat signal depends on the degree of spread in the clutter and beat signal caused by the radar system phase noise

• The Journal of the Korea Contents Association
• /
• v.4 no.4
• /
• pp.205-213
• /
• 2004

In this paper, we proposed a wavelet phase-only filter modulation synthetic discriminant function joint transform correlator(WPOfSDF-JTC) for scale invariant pattern recognition, and an improved algorithm to reduce the filter synthesis time. Computer simulation showed that the proposed filter has better SNR than CWMF if input image has random noise and the improved synthesis algorithm can reduce the iteration time. We used frequency selective JTC to solve the problem of the optical alignment and eliminate the autocorrelation and crosscorrelation between each input image.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.400-401
• /
• 2019

본 논문에서는 전동기 제정수와 전압 및 전류제한 값에 따른 단상 영구자석 동기전동기의 능력곡선을 분석하였다. 역기전력 상수와 고정자 인덕턴스 및 전압 전류 제한값에 따라 영구자석 동기전동기의 능력곡선이 변하게 되며, 최대토크를 얻을 수 있는 인가전압의 크기 및 위상이 결정된다. 제안한 능력곡선의 분석방법을 통하여 얻은 최대토크에서의 인가전압을 컴퓨터 모의실험으로 검증하였다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.25 no.9
• /
• pp.903-911
• /
• 2014

This paper proposes a high speed frequency synthesizer with dual phase-locked loop(PLL) structure to improve phase noise level and shape in a wideband receiver. To reduce phase noise and fractional spur, a output frequency of $1^{st}$ PLL used as reference frequency of $2^{nd}$ PLL is changed. The frequency synthesizer has been designed with 1 Hz frequency resolution using digital NCO in 6.5~8.5 GHz wide spectrum. The measured results of the fabricated frequency synthesizer show that the output power is about -3 dBm, the maximum lock-in time and phase noise are within 60 us and -95 dBc/Hz at 10 kHz offset, respectively.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2020.07a
• /
• pp.311-313
• /
• 2020

컴퓨터 생성 홀로그램(CGH)에서 시야각은 매우 중요한 특성이다. 시야각에 따라 홀로그램을 볼 수 있는 영역이 결정되며 시야각을 넘어가게 되면 재구성된 오브젝트가 잘려 보이게 된다. CGH의 최대 시야각은 회절 격자 방정식에 의해 결정이 되며, 해당 수식에 따르면 홀로그램 재생 장치인 공간 광 변조기(SLM)의 픽셀 피치에 반비례한다. SLM의 픽셀 피치를 줄이는 것은 어렵고 비용이 많이 들기 때문에 본 논문에서는 고해상도 랜덤 바이너리 위상 마스크를 SLM에 부착하여 CGH의 시야각을 확장하는 방법을 제안한다. CGH를 계산하는데 자주 사용되는 반복 푸리에 변환 알고리즘(IFTA)에 위상 평균화 단계를 도입하여 SLM과 위상 마스크간의 픽셀 크기 및 개수의 차이를 극복하였다. 또한 스칼라 회절 이론을 바탕으로 한 홀로그램 시뮬레이션에 제안한 방법을 적용 후 가상 눈 모델을 도입하여 두 개의 물체로 이루어진 홀로그램을 재구성하고 여러 각도에서 관찰하여 시야각이 향상되는것을 검증하였다.

• Journal of IKEEE
• /
• v.14 no.3
• /
• pp.232-235
• /
• 2010

A 60GHz active phase shifter with 65nm CMOS is presented by replacing passive switches in switched-line type phase shifter with active ones. Active-switch phase shifter is composed of active-switch blocks and passive delay network blocks. The active-switch phase shifter design is compact compare with the conventional vector-sum phase shifter. Active-switch blocks are designed to accomplish required input and output impedances whose requirements are different whether the switch is on or off. And passive delay network blocks are composed of lumped L,C instead of normal microstrip line to reduce the size of the circuit. An 1-bit phase shifter is fabricated by TSMC 65nm CMOS technology and measurement results present -4dB average insertion loss and 120 degree phase shift at 65GHz.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.36D no.10
• /
• pp.51-60
• /
• 1999

For an effective phase-multiplexing in holographic memory system, four types of phase code used as reference beam are generated. In case of $32 {\times} 32$ address beam, a phase error with 0%, 5%, 10% 15%, 20%, and 25% error rate, is purposely added to the real phase values in order to consider the practical SLM's nonlinear characteristics of phase modulation in computer simulation, cross talks and SNRs are comparatively analysed for these phase-codes by the auto and cross-correlation. Pseudo-Random(PSR) Phase Code has the lowest cross-correlation mean value of 0.067 among four types of Phase Code, which means the SNR of the PSR is higher than other Phase Codes. Also, the standard deviation of the PSR phase code indicating the degree of recalled data degradation is the lowest value of 0.0113.