• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.8
• /
• pp.1805-1810
• /
• 2014

The phase noise spectrum distribution for remote controller using the BPSK mode and low data rate of 50 kbps was designed and proposed in this paper. In case of applying the BPSK that transmission performance is superior to FSK method, the performance degradations due to phase noise are generated. To minimize the phase noise effect, it is important to dispatch the digital signal in channel environment with required phase noise characteristics. To provide the terminal design technique and the proper channel environment with required phase noise characteristics, the phase noise spectrum distribution was designed for required phase noise characteristics. By analyzing the phase noise effects for damping factor and noise bandwidth of the carrier recovery circuit, the phase noise spectrum design that consider the damping factor and noise bandwidth was performed. Based on the IESS-308 standards, also, the phase noise effects was analyzed. The phase noise spectrum design techniques and phase noise spectrum that is suitable to remote controller were proposed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.8
• /
• pp.777-786
• /
• 2003

The phase noise characteristics of the phase-locked loop frequency synthesizer were predicted based on the analysis for phase noise contribution of noise sources. The proposed phase noise model in this paper more accurately predicts the phase noise spectrum of frequency synthesizer. To accurately model the phase noise contribution of noise sources in frequency synthesizer, the phase noise sources were analyzed via modeling of the frequency divider and phase noise components using Leeson model for reference signal source and VCO. The phase noise transfer functions to VCO from noise sources were analyzed by superposition theory and linear operation of phase-locked loop. To evaluate the phase noise prediction model, the frequency synthesizers were fabricated and were evaluated by measured data and prediction data.

• The Journal of the Acoustical Society of Korea
• /
• v.17 no.8
• /
• pp.103-109
• /
• 1998

디지털신호의 변조에는 기본적으로 진폭 편이 변조(ASK: Amplitude-Shift Keying), 주파수 편이 변조(FSK: Frequency-Shift Keying), 위상 편이 변조(PSK: Phase-Shift Keying) 등의 세 가지 방법이 있다. 본 논문에서는 표본클록 합성계수 방식에 관한 이론을 고찰하고, 클록초기치 누적방식의 DDFS를 이용하여 위에서 언급한 변조방법을 실현할 수 있는 주파수 도약 대역 확산 통신에 적합한 변조기를 구현하였다. 또한, 합성된 출력주파수 의 정현파형에 대한 스펙트럼 분석과 PN(Pseudo Noise) 부호를 사용한 순시적인 주파수 도 약 상태, 위상제어의 가능성 등을 확인한 결과 실험으로부터 다음과 같은 결과를 얻었다. 첫 째, 합성된 출력주파수는 주파수 Index에 따라 기준주파수에 정확히 정수배가 되며, 둘째, 합성된 정현파형의 스펙트럼으로 기본파와 여러 고조파의 크기를 비교하여 본 결과 50[dB] 이상의 차이가 남으로서 고조파 성분들이 상당히 감소되었음을 확인하였고, 셋째, PN 코드 를 사용하여 순시적인 주파수 도약 상태를 확인하여 본 결과 스위칭 시간이 빠르기 때문에 주파수 도약 특성이 뛰어남을 알 수 있었으며 또한, 누산기의 set/reset 상태를 변화시킴에 따라 위상이 제어됨을 입증하였다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.5
• /
• pp.152-161
• /
• 2017

The CBTC(Communication based Train Control) system employed on 2.4GHz ISM band adopt the IEEE802.11.x standard. Therefor communication time delay, distortion and data losses will be produced. To overcome these problems, CPSK(Continuous Phase shift keying) modulated DS/SS(Direct Sequence Spread Spectrum) transmitter with 908MHz carrier frequency is proposed. Through the eye diagram and scatter diagram the performance is analysed. And the phase noise characteristic of the local oscillator is measured about 60dBc/Hz, this means that the phase noise performance is very good compared to the signal. Reference frequency suppression of the 2nd local oscillator is 50dB below compared to the signal. Through the polarities of the complementary signal equally probable, the line spectrum of the output spectrum is eliminated. The nonlinear effects which introduce the spectral spreading or spectral regeneration is reduced remarkably.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.197-204
• /
• 2013

In this paper, we propose a new method for artificial bandwidth extension of narrow-band signal in frequency domain. In the proposed method, a narrow-band signal is decomposed into excitation signal and spectral envelope, which are extended independently in frequency domain. The excitation signal is extended such that low-band harmonic structure is maintained in high band, and the spectral envelope is extended based on sub-band energy using NMF. Finally, the spectral phase is determined based on signal correlation between frames in time domain, resulting in the final wide-band signal. The subjective evaluation verified that the wide-band signal generated by the proposed method has a higher quality than the original narrow-band signal.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.651-652
• /
• 2012

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.617-623
• /
• 2013

Accurate prediction of the radiated noise is important to reduce the noise of the washing machine. It is also necessary to predict the excitation force accurately because excitation force can induce noise. In order to predict the excitation force acting on the washing machine, this paper conducts source identification method by use of phase reference spectrum. In this method, the transfer function between the cabinet and the motor through FEM and the measured response from the surface of the cabinet is used. The analysis of the radiation noise from the identified exciting force has been investigated. The comparison between the predicted SPL and the measured SPL at 1m apart from the front side of the washing machine showed good tendency.

• Korean Journal of Optics and Photonics
• /
• v.4 no.4
• /
• pp.457-463
• /
• 1993

We investigated that the CARS signals generated from resonant or nonresonant contributions can be selectively suppressed by phase-controlled nonlinear interferometry. To control the phase of the CARS signal over a broad spectral range, a home-made phase shifting unit was used, whose thickness was automatically controlled as the wavelength of Stokes beam scaned. Using this technique, we recovered the Q-branch resonance lines of carbon monoxide and HC1 which had been distorted and buried by the nonresonant and resonant signal of propane respectively. All the spectrum measured have been normalized by reference signal which had no resonance lines over the spectral range of interest.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.4
• /
• pp.94-100
• /
• 2001

In October 1997, low-frequency reverberation was measured at an experimental site off the west coast of the Jeju island using the explosive charge, Signals Underwater Sound (SUS). Received signals were separated into the noise, the reflection, and the scattering region, and then were analyzed for the spectral and statistical characteristics of each region. In the analysis of the spectrum we verified that each region had a unique frequency band and statistical characteristics as well. The results of this analysis showed that the real and imaginary portions were shown to be both normal distributions in each frequency bin. The reverberation envelope had a Rayleigh distribution and the phase had a uniform distribution.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.6
• /
• pp.1037-1044
• /
• 2020

Since radar wind profiler (RWP) provides wind field data with high time and space resolution in all weather conditions, their verification of the accuracy and quality is essential. The simultaneous wind measurement from rawinsonde is commonly used to evaluate wind vectors from RWP. In this study, the simulation algorithm which produces the spectrum and raw time series (I/Q) data from the average values of moments is presented as a step-by-step verification method for the signal processing algorithm. The possibility of the simulation algorithm was also confirmed through comparison with the raw data of LAP-3000. The Doppler power spectrum was generated by assuming the density function of the skew-normal distribution and by using the moment values as the parameter. The simulated spectrum was generated through random numbers. In addition, the coherent averaged I/Q data was generated by random phase and inverse discrete Fourier transform, and raw I/Q data was generated through the Dirichlet distribution.