• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.5
• /
• pp.718-724
• /
• 2010

This paper studies the differences due to the wall effect in propeller open water(POW) characteristics tested in a towing tank and in a medium size cavitation tunnel(CT). When the advanced velocity of the propeller is defined as the flow velocity measured in the plane of propeller, POW characteristics resulting from CT has a better relationship with them of towing tank. To obtain the wall effect in the propeller plane, numerical computation using the lifting panel theory is performed with and without the wall around a propeller. Then, POW results in CT are corrected based on the wall effect from numerical results. The POW results obtained from this procedure show a better agreement with the experimental results in the towing tank.

• Journal of the Society of Naval Architects of Korea
• /
• v.30 no.2
• /
• pp.66-75
• /
• 1993

Flow control devices, such as flow liners, are frequently introduced hi a cavitation tunnel in order to reduce the tunnel blockage effect, when a three-dimensional wake distribution is simulated using a complete ship model or a dummy model. In order to estimate the tunnel wall effect and to evaluate the effect of flow liners on the simulated wake distribution, a surface panel method is adopted for the calculation of the flow around a ship model and flow liners installed in a rectangular test section of a cavitation tunnel. Calculation results on the Sydney Express ship model show that the tunnel wall effect on the hull surface pressure distribution is negligible for less than 5% blockage and can be appreciable for more than 20% blockage. The flow liners accelerate the flow near the after body of the ship model, so that the pressure gradient there becomes more favorable and accordingly the boundary layer thickness would be reduced. Since the resulting wake distribution is assumed to resemble the full scale wake, flow liners can also be used to simulate an estimated full scale wake without modifying the ship model. Boundary layer calculation should be incorporated in order to correlate the calculated wake distribution with tole measured one.

• 한국전산유체공학회:학술대회논문집
• /
• 1998.11a
• /
• pp.160-166
• /
• 1998

In this paper, incompressible two-dimensional Navier-Stokes equations are numerically solved for the study of steady laminar flow around a body with the wall effect. A second-order finite difference method is used for the spatial discretization on the nonstaggered grid system and the 4-stage Runge-Kutta scheme for the numerical integration in time. The pressure field is obtained by solving the pressure-Poisson equation with the Neumann boundary condition. To investigate the wall effect, numerical computations are carried out for the NACA 0012 section at the various blockage ratios. The pressure and skin friction on the foil surface, velocity pronto in its wake and drag coefficient are investigated as functions of the blockage ratio.

• Journal of the Society of Naval Architects of Korea
• /
• v.57 no.3
• /
• pp.133-139
• /
• 2020

In order to study the resistance test technique for the submerged body in Large Cavitation Tunnel (LCT), DARPA Suboff, submarine model publicly available was manufactured. DTRC released the resistance test data of DARPA Suboff conducted at ship speeds up to 18.0 knots in high-speed towing tank in 1990. As LCT is considered restricted waterways with walls, the resistance test results must be corrected with three wall blockage effects called buoyancy effect, solid blockage effect and wake blockage effect. Before correction, the resistance of LCT was 16~20 % higher than that of DTRC. After correction, the resistance and the resistance coefficients were compared with those of DTRC. The corrected resistance of LCT shows good agreement with that of DTRC. The residual resistance coefficient shows the difference according to the calculation method of buoyancy and frictional resistance coefficient. This paper suggests the best way for the calculation of residual resistance coefficient, On the basis of the present study, it is thought that the operating conditions for the propeller cavitation and noise tests can be drawn through LCT tests.

• The Journal of Korean Society for Radiation Therapy
• /
• v.27 no.1
• /
• pp.53-60
• /
• 2015

Purpose : The purpose of this study is to evaluate the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. Materials and Methods : The phantom is produced to equally describe prostate and rectum based on a 3D volume contour of an actual prostate cancer patient who is treated in Asan Medical Center by using a 3D printer (3D EDISON+, Lokit, Korea). CT(Computed tomography) images of phantom are aquired by computed tomography (Lightspeed CT, GE, USA). By using treatment planning system (Eclipse version 10.0, Varian, USA), treatment planning is established after volume of a prostate cancer patient is compared with volume of the phantom. MOSFET(Metal OXIDE Silicon Field Effect Transistor) is estimated to identify precision and is located in 4 measuring points (bladder, prostate, rectal anterior wall and rectal posterior wall) to analyzed treatment planning and measured value. Results : Prostate volume and rectum volume of prostate cancer patient represent 30.61 cc and 51.19 cc respectively. In case of a phantom, prostate volume and rectum volume represent 31.12 cc and 53.52 cc respectively. A variation of volume between a prostate cancer patient and a phantom is less than 3%. Precision of MOSFET represents less than 3%. It indicates linearity and correlation coefficient indicates from 0.99 ~ 1.00 depending on dose variation. Each accuracy of bladder, prostate, rectal anterior wall and rectal posterior wall represent 1.4%, 2.6%, 3.7% and 1.5% respectively. In- vivo dosimetry represents entirely less than 5% considering precision of MOSFET. Conclusion : By using a 3D printer, possibility of phantom production based on prostate is verified precision within 3%. effectiveness of In-vivo dosimetry is confirmed from a phantom which is produced by a 3D printer. In-vivo dosimetry is evaluated entirely less than 5% considering precision of MOSFET. Therefore, This study is confirmed the usefulness of a 3D printed phantom for in-vivo dosimetry of a prostate cancer patient. It is necessary to additional phantom production by a 3D printer and In-vivo dosimetry for other organs of patient.

• KSBB Journal
• /
• v.16 no.1
• /
• pp.41-47
• /
• 2001

H. pylori is known to be a key pathogen of chronic gastric and duodenal ulcers. Bacterial adhesion to hosts is an essential step for bacterial infection and the inhibition of this adhesion provides a possible method for the treatment of the infection. The inhibitory effect of antibody lgY, produced from immunized hens with H. pylori antigen, was studied in vitro. The inhibition of H. pylori adhesion to AGS was as high as 90% using 0.5mg/ml of lgY, and almost 80% of the detachmentwas also achieved. The inhibitory effect of adhesion-inhibition candidates was investigated. Additives in combination with lgY increased the adhesion-inhibiting effect by about 30-50%. However, the adhesion molecules of H. pylori were varied and complex, therefore the further studies are necessary to develop an adhesion inhibitor and effective enough to be employed for the treatment of H.pylori, in vivo.

• Journal of Applied Biological Chemistry
• /
• v.53 no.4
• /
• pp.239-247
• /
• 2010

Helicobacter pylori (H. pylori) is the main causal bacteria occurring stomach diseases such as gastritis and gastric ulcer. These bacteria are found in most adults' stomach. Especially, 60~90% of H. pylori is found in Korean stomach. As a lot of curing methods have been applied to remove H. pylori and certain effects have been done but it's impossible to remove it perfectly with the existing medicines for curing. Therefore, it's very urgent to develop a certain substance showing more excellent effect than the existing medicines. In this study, it wasfound that organic acids can be accessed easily, inserted into mouth for curing and has excellent sterilizing effect among the substances showing excellent antibiotic power. Among them, acetic acid showed the most excellent effect. To confirm the refraining power against H. pylori, we performed tests through in vitro contact testing methods by concentration and tsta. In the result, H. pylori were terminated perfectly in the solution of acetic acid more than 0.3% within 1 minute. With a base of the result of In vitro test, It was performed in vivo test. As the results, H. pyloriwere terminated perfectly on 0.2% solution of acetic acid from the result of confirming through urease test, ELISA method and RT-PCR. Therefore, the result of this research will be very useful information in developing the functional foodstuffs using acetic acid in order to terminate H. pylori on the people's stomach, who suffers from H. pylori.

• Journal of the East Asian Society of Dietary Life
• /
• v.25 no.4
• /
• pp.667-671
• /
• 2015

This study investigated the antioxidant capacities and inhibitory activity of peeled lotus root (Nelumbo nucifera) as a food material on angiotension-converting enzyme (ACE). The antioxidant effects on total polyphenol and total flavonoid contents were not signicant. However, DPPH radical scavenging activity decreased from 85.07% to 80.70% by peeled treatment. SOD-like activity decreased from 20.84% to 17.97%, and ACE inhibitory activity decreased from 53.4% to 50.1% by peeled treatement. Thus, consumption of non-peeled lotus root should increase.

• Journal of the East Asian Society of Dietary Life
• /
• v.24 no.6
• /
• pp.793-801
• /
• 2014

This study evaluated the qualitative properties of lotus root (Nelumbo nucifera) peels as food materials. Proximate composition, sweetness, pH, total acidity, color, mineral, fatty acid, free sugar and organic acid contents of preprocessed lotus root were measured. Crude moisture, protein, and total fiber contents of non-peeled treated Lotus roots were higher than those of peeled treated lotus roots (p<0.05). Lightness and yellowness of color were reduced by peeling process, whereas redness increased (p<0.05). The mineral contents of Mg, Ca, Fe and Na were higher in non-peeled lotus roots, whereas peeled treated lotus root showed higher K contents (p<0.05). The major fatty acids were palmitic, oleic, linoleic and linolenic acids. The total free sugar content of non-peeled lotus roots was higher than that of peeled treated lotus roots (p<0.05). Glucose content was not significantly different, whereas fructose, sucrose, and maltose contents were significantly different. The organic acid and free amino acid contents were higher in peeled lotus roots (p<0.01).