• 한국시뮬레이션학회논문지
• /
• 제27권4호
• /
• pp.61-68
• /
• 2018

본 논문에서는 FOD (foreign object debris) FMCW (frequency modulated continuous waveform) 레이다에 대한 지상 클러터 모델링 및 검출 성능에 미치는 영향을 분석한다. 레이다 수신신호에는 FOD에 의해 반사된 신호 뿐 만 아니라 활주로 표면 및 잔디영역에 의해 반사된 신호까지 포함된다. FOD의 RCS (radar cross section)가 잔디영역의 RCS와 거의 같기 때문에 클러터 제거 알고리즘을 적용하지 않으면 FOD의 검출이 어렵다. 또한, FOD와 클러터 모두가 움직이지 않기 때문에, 대표적 클러터 제거 알고리즘인 MTI (moving target indicator) 기법의 적용이 어렵다. 따라서 클러터 맵을 이용한 클러터 제거 기법이 필요하고, 이를 위해서는 활주로 표면을 고려한 클러터 맵을 정확하게 생성하는 것이 중요하다. 본 논문에서는 신뢰도 높은 클러터 맵을 생성하기 위해 FOD가 없는 표면의 경우에만 모든 범위의 레인지 빈에 대해 각각의 비트신호를 생성하고, 생성된 비트 신호를 100번 누적하였으며 RCS 값에 웨이블 분포를 적용하였다. 시뮬레이션 결과는 생성된 클러터 맵을 FOD FMCW 레이다에 적용함으로써 FOD가 제대로 검출됨을 보인다.

• 한국수소및신에너지학회논문집
• /
• 제30권6호
• /
• pp.608-613
• /
• 2019

The purpose of the present study is to analyze and evaluate the performance of a small Darrieus wind turbine installed at the Urumsil region of Deokjeok-do Island in the west of South Korea 50 km away from Incheon. This place has no government electricity so alternate resources of energy needed to be installed there. For this purpose a small Darrieus wind turbine with the capacity of 1.5 kW was developed and installed at the site. The experimental power output of the wind turbine is less than the designed power at the same values of wind speed. This power loss is mainly due to the highly unsteady nature wind of sudden changes in magnitude of wind speed and wind angle. The results of current study can be used to make a future power generation plan for Deokjeok-do and other nearby small islands.

• 풍력에너지저널
• /
• 제14권1호
• /
• pp.37-43
• /
• 2023

In this study, synthetic time series wind data was generated numerically using a second-order Markov chain. One year of wind data in 2020 measured by the AWS on Wido Island was used to investigate the statistics for measured wind data. Both the transition probability matrix and the cumulative transition probability matrix for annual hourly mean wind speed were obtained through statistical analysis. Probability density distribution along the wind speed and autocorrelation according to time were compared with the first- and the second-order Markov chains with various lengths of time series wind data. Probability density distributions for measured wind data and synthetic wind data using the first- and the second-order Markov chains were also compared to each other. For the case of the second-order Markov chain, some improvement of the autocorrelation was verified. It turns out that the autocorrelation converges to zero according to increasing the wind speed when the data size is sufficiently large. The generation of artificial wind data is expected to be useful as input data for virtual digital twin wind turbines.

• 대한기계학회논문집A
• /
• 제27권12호
• /
• pp.2004-2010
• /
• 2003

Fracture life and crack retardation behavior were examined experimentally using CT specimens of aluminum alloy 5083. Crack retardation life and fracture life were a wide difference. between 0.8 and 0.6 in proportion to ratio of load reduction. The wheeler model retardation parameter was used successfully to predict crack growth behavior. By using a crack propagation rule, prediction of fracture life can be evaluated quantitatively. A statistical approach based on Weibull distribution was applied to the test data to evaluate the dispersion in the retardation life and fracture life by the change of load reduction.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 추계학술대회 논문집
• /
• pp.435-438
• /
• 2009

Wind speed is measured on the nacelle at the location of wind turbines are installed. The wind speed is transformed to inlet wind speed at the front of hub using newly developed algorithm derived from energy conservation. Wind energy potential is analyzed using the inlet air velocity in the region of Bieung-do wind farm. As results, wind speed depending on the month, yearly averaged wind speed, wind speed distribution, and energy density are showed in this study. Bieung-do area is close to Saemankeum, and the analysis of wind energy potential in Bieung area will be helpful to understand and develop wind energy industry in Saemankeum area.

• 대한기계학회논문집
• /
• 제16권2호
• /
• pp.200-206
• /
• 1992

The effect of fiber diameter and gauge length on pull-out test for the interfacial properties in fiber reinforced resin composites have been investigated and these results have been arranged as statistical analysis. The fiber and matrix resins used for this study were stainless steel fiber (SUS316) and carbon fiber (high strength type), epoxy and high density polyethylene resin. From this study, it has been found that shear strength are constant regardless of gauge length of pull-out test and coefficient of variation depend on fiber diameter. In addition, it has been found that the interfacial shear strength decreased with the increasing fiber diameter, and in all case, Weibull parameter (m) has approximately 1.2/C.O.V.

• 대한교통학회지
• /
• 제17권4호
• /
• pp.85-97
• /
• 1999

본 연구의 목적은 수단선택과 통행배정의 결합모형을 통하여 정보이용률, 정보제공전략, 혼잡상태의 변화에 따른 자가용 운전자와 버스승객의 정보제공효과를 비교, 평가하는 데 있다. 평가모형은 수단간 효용차를 웨이블 분포로 가정한 수단선택과 정보이용자와 비이용자의 노선선택시 비용인지오류크기를 상이하게 적용하여 노선선택행위를 설명한 확률적 사용자 평형모형으로 구성된다. 정보제공전략에 있어 사용자 최적과 체계 최적외에 두 전략의 혼합전략을 구사했을 경우를 비교하였다. 모의실험은 Sioux Falls Network에서 이뤄졌다. 평가결과 정적모형에서는 혼잡이 심하고, 체계최적상태에서 정보이용률이 0.4∼0.6일 때 총 통행시간의 절감효과가 크게 나타났으며. 이 때 버스 분담율도 증가하였다. 특히 정보이용률에 따른 총 통행비용의 분포가 U자 형태를 나타냄으로써 Braess의 역설이 존재함을 알 수 있었다. 그러나 일별동적모형에서는 시간이 경과함에 따라 정보이용률에 비례하여 정보제공효과가 나타남으로써 다소 상이한 결과를 보여주었다.

• 한국강구조학회 논문집
• /
• 제10권1호통권34호
• /
• pp.37-45
• /
• 1998

기계 및 구조물의 안전성과 신뢰성 평가를 위하여 금속재료의 피로강도 데이터베이스 시스템을 구축하고, 이를 이용하여 금속재료의 피로수명 분포특성을 검토하였다. 종속도를 이용하여 구성한 관계형 피로강도 데이터베이스 시스템은 일련의 데이터 관리 및 해석작업을 효율적으로 수행하였다. 또한 Robust 방법과 보상오차함수(complementary error function)를 이용한 3-파라미터 Weibull분포의 파라미터 추정법 및 비파손확률를 검토하기 위하여 제안된 새로운 기준식의 타당성을 검토하였다. 조합분포모델을 이용하여 부하응력비와 Weibull분포의 파라미터 항으로 나타낸 피로수명 분포식은 탄소강의 P-R-N 특성을 해석함에 있어서 좋은 결과를 보였다.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 추계학술발표대회 논문집
• /
• pp.81-84
• /
• 2008

This paper discussed the validity of wind force power generation in consideration of the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind velocity, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was higher at wind power plants installed in southwestern coastal areas where wind velocity was low than at those installed in mountain areas in Gangwondo where wind velocity was high. This suggests that the shape parameter of wind distribution is low due to the characteristics of mountain areas. and the standard deviation of wind velocity is large due to the effect of mountain winds, and therefore, actual generation is low in mountain areas although wind velocity is high.

• 한국태양에너지학회 논문집
• /
• 제28권6호
• /
• pp.24-32
• /
• 2008

This paper discussed the Feasibility study of wind power generation considering the topographical characteristics of Korea. In order to estimate the exact generation of wind power plants, we analyzed and compared wind resources in mountain areas and plain areas by introducing not only wind speed, the most important variable, but also wind distribution and wind standard deviation that can reflect the influence of landform sufficiently. According to the results of this study, generation was almost the same at wind power plants installed in southwestern coastal areas where wind speed was low as at those installed in mountain areas in Gangwondo where wind speed was high. This demonstrates that the shape parameter of wind distribution is low due to the characteristics of mountain areas, and the standard deviation of wind speed is large due to the effect of mountain winds, therefore, actual generation compared to southwestern coastal areas is almost similar in mountain areas even though wind speed is high.