• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.7
• /
• pp.758-769
• /
• 2003

In this research, I classified adult women's back types through anthropometric measurement and photographic measurement to present a judging individual body size according to the type. Also, Ⅰ calculated regression fomula by types and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 5 factors were extracted and those factors comprised 75.89% of total variance. 2. According to the cluster analysis, Ⅰclassified the back types into 6 types. Type 1 was passive posture in the upper and the lower parts of the back. Type 2 was active posture in the upper and the lower parts of the back. Type 3 had the lowest protrusion of the back. Type 4 had the upper part of the back which is mostly bent downward. Type 5 was the most suitable shape. Type 6 had the lower part of the back which was turned over the most. 3. Ⅰconducted a discriminant analysis to judge the body types of individuals. 4. For the calculation of measurements necessary for the basic bodice pattern, Ⅰpresented regression formulas by each type. 5. By conducting the wearing experiments, Ⅰsuccessfully made the final basic bodice patterns by types. As a result of comparative experiments between the basic bodice patterns and comparison bodice pattern, the suitability of basic bodice patterns were more highly assessed.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.7
• /
• pp.1303-1313
• /
• 2001

This study was performed to develop a mobile functional pattern reflecting the characteristics of the middle aged women's lower body types based on the slacks construction components. The results and procedures obtained from this study were as follows; 1. The bodys measurement of the 252 middle aged women of 45∼59 years old were used to analyze the size and somato type. 2. For multiple analysis of the lower body types, horizontal and vertical section maps were obtained by sliding gauge method and extracted constructional factors of slacks. 3. The following condition was determined with both standing and moving position of body: (gradient of C.B.L/2)+3°and (back crotch extention)+2cm. 4. Development of new slacks pattern drafting was based on the result of data analysis. Trough the wearing test by the sensory evaluation, It showed that developed slacks pattern was judged better than existing patterns in items of comfort of comfort of silhouette and moving.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.27 no.5
• /
• pp.463-474
• /
• 2003

In this research, adult women＇s shoulder types were Classified through direct and indirect measurements to present a judging individual body size according to the type. Also, regression formula by shoulder types were calculated and presented the basic bodice pattern. The results were as follows: 1. The result of factor analysis indicated that 6 factors were extracted through factor analysis and those factors comprised 66.1 to of total variance. 2. By using factor scores, cluster analysis was carried out and subject were classified into 5 clusters. Type 1 was the inclined shoulders, wide shoulders and passive posture. Type 2 was the front type shoulders and active posture. Type 3 was the thick shoulders and back type shoulders. Type 4 was the narrow shoulders. Type f was the drooped shoulders, thin shoulder and sway posture. 3. The body types of individuals were judged by discriminant analysis. 4. After setting 4 items such as the bust girth, posterior waist length, neck base girth and waist girth as representative items and regression formulas were presented. the superiority of the final basic bodice patterns were demonstrated by high approval rate of the subjects who participated in testing.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.682-685
• /
• 2014

In this paper, an improved designed of the circularly polarization antenna for sensor node. Stochastic optimization algorithms of Particle Swarm Optimization (PSO) and Adaptive Particle Swam Optimization(APSO) are studied and compared. To verify that the APSO is working better than the standard PSO, the design of a circularly polarization antenna is shows the optimized result with 27 iterations in the APSO and 41 iterations in th PSO.

• Journal of architectural history
• /
• v.32 no.2
• /
• pp.7-19
• /
• 2023

This article focuses on the Namdaemum repair and the Seokguram restoration, which had begun in 1961, as an important repair conducted during the time of seeking the conservation principle of architectural heritage after liberation in Korea. Through the analysis of the principles described in the repair report issued after the two repairs, meeting records, and related expert announcements, it is shown that the principle of 'preservation of the historic state' had been established at Namdaemun repair and later have changed to the principle of 'restoration of the historic form' which means reconstruction in Seokguram restoration. By analyzing the minutes of the Cultural Heritage Committee's meeting on the repair of other cultural properties during this period, it is revealed that the key terms related to the preservation principle, 'historic form' and 'restoration', were given meaning as 'object' and 'method' of preservation, and then 'restoration of the historic form' has been gradually used as a conservation principle.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.9
• /
• pp.1034-1041
• /
• 2012

In this paper, a compact circularly polarized metamaterial patch antenna using the -1 mode that is induced by the composit right-left handed(CRLH) transmission line is proposed. Basically, since the -1 mode is the same properties with the +1 mode of the conventional patch antenna, the circular polarization(CP) is realized. If two orthogonal -1 modes are excited with $90^{\circ}$ phase difference, the CP property can be obtained. In order to obtain two orthogonal modes and $90^{\circ}$ phase difference, 4 mushroom structures having the shape of triangle are employed and the inter-digital gaps are optimized, respectively. The fabricated antenna is based on RT/duroid5880 substrate and the total area of the 4 mushrooms is $0.161{\lambda}_0{\times}0.161{\lambda}_0$. It is confirmed that the center frequency of the proposed antenna is measured as 2.845 GHz and it operates from 2.830 GHz to 2.850 GHz. In addition, the antenna maintains the CP property from 2.842 GHz to 2.847 GHz at the peak gain and the measured radiation efficiency is 46 %.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.585-593
• /
• 2010

Geographic routing has been considered as an efficient, simple, and scalable routing protocol for wireless sensor networks since it exploits pure local location information instead of global topology information to route data packets. Geographic routing requires the sources nodes to be aware of the location of sinks. Most existing geographic routing protocols merely assume that source nodes are aware of the locations of sinks. How can source nodes get the locations of sinks was not addressed in detail. In this paper, we propose a sink location service via circle path for geographic routing in wireless sensor networks. In this scheme, a sink sends a Sink Location Announcement (SLA) message along a circle path, and a source node sends a Sink Location Query (SLQ) message along a straight path that certainly passes through the circle path. By this way we can guarantee the SLQ path and SLA path have at least one crossing point. The node located on the crossing point of the two paths informs the source node the sink location. This procedure can correctly work in any irregular profile sensor networks such as network that has holes or irregular shape by some rules. Simulation results show that our protocol is superior to other protocols in terms of energy consumption and control overhead.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.397-400
• /
• 1999

본 연구에서는 기존의 모드적합법의 단점을 개선하여 각 관에 임의의 모드갯수를 선택할 수 있고, 동심관형 단순확장관의 음향특성뿐만 아니라 입$\cdot$출구가 임의의 위치에 있는 경우에도 모드적합법을 적용할 수 있는 방안을 제시한다. 그리고 제시한 방안으로 프로그램을 작성하여, 각각 임의의 모드와 임의의 입$\cdot$출구의 위치를 가지는 원형 소음기의 4단자 정수를 구하고, 이로부터 임의의 입$\cdot$출구 위치에 따른 소음기의 음향특성을 구하여 유한요소법과 비교하여 제안하는 방법의 유용성을 검증하고 고차모드의 영향을 조사하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.267-270
• /
• 2000

강제가진을 받는 진동장은 직접장과 반사장으로 이루어진다. 직접장은 무한구조요소가 점입력을 받을 때의 해와 같으며, 반사장은 직접장에 의해 발생되는 1차 반사파 및 추가로 발생하는 무수한 반사파들의 합으로 나타낼 수 있다. 본 논문에서는 점가진을 받는 유한한 평판의 단일 주파수 해석을 수행하기 위한 레이추적기법을 연구하였다. 이를 위해, 직접장은 고주파수 가정을 이용하여 원형전달파로 근사화하고. 이 원헝전달파를 다수의 파동관 (wave tube)으로 이산화하였다. 균일한 경계조건과 무시할 만큼의 미약한 굴절효과를 가정하고 경계에서의 정반사 (specular reflection)만을 고려하여, 경계에서의 입사파동관. 전달 및 반사파동관의 기하학적 관계를 제안하였다. 이들 파동관이 평판 내부를 진행하면서 관측점에 미치는 영향들을 합성하여 비교적 정확한 강제진동응답을 얻을 수 있음을 단일 평판의 예제를 통하여 확인할 수 있었다 그러나, 연성된 평판의 경우에는 다소 부정확한 결과를 얻었다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.119-126
• /
• 2003

In this paper, a cylindrical cavity resonator oscillator with high Q factor is designed and fabricated to improve the phase noise characteristic. A cavity resonator is coupled to oscillating circuit using aperture hole. Measured results show that the cylindrical cavity resonator oscillator (CRO) for Ku-band has less phase noise than the dielectric resonator oscillator (DRO) with the same oscillating circuit. It has output power of +3.92 dBm at the center frequency 13.4015250 GHz and phase noise of -109 dBc/Hz at 100 kHz offset.