• Geophysics and Geophysical Exploration
• /
• v.24 no.1
• /
• pp.1-5
• /
• 2021

The closed-form expressions of the vector gravity and gravity gradient tensor due to a circular disk are derived. The gravity potential due to a circular disk with a constant density is defined for a cylindrical system. Then, the vector gravity is derived by differentiating the gravity potential with respect to cylindrical coordinates. The radial component of the vector gravity in the cylindrical system is converted into horizontal gravity components in the Cartesian system. Finally, the gravity gradient tensor due to a circular disk is obtained by differentiating the vector gravity with respect to the Cartesian coordinates.

• Geophysics and Geophysical Exploration
• /
• v.25 no.1
• /
• pp.38-43
• /
• 2022

In case axial symmetrical bodies with varying cross sections such as volcanic conduits and unexploded ordnance (UXO), it is efficient to approximate them by adding the response of thin disks perpendicular to the axis of symmetry. To compute the vector magnetic and magnetic gradient tensor respones by such bodies, it is necessary to derive an analytical expression of the circular disk. Therefore, in this study, we drive closed-form expressions of the vector magnetic and magnetic gradient tensor due to a circular disk. First, the vector magnetic field is obtained from the existing gravity gradient tensor using Poisson's relation where the gravity gradient tensor due to the same disk with a constant density can be transformed into a magnetic field. Then, the magnetic gradient tensor is derived by differentiating the vector magnetic field with respect to the cylindrical coordinates converted from the Cartesian coordinate system. Finally, both the vector magnetic and magnetic gradient tensors are derived using Lipschitz-Hankel type integrals based on the axial symmetry of the circular disk.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1171-1172
• /
• 2015

송전선이나 전기기기의 나선(裸線)부분을 절연하고 동시에 기계적으로 유지 또는 지지하기 위한 절연체와 이것과 일체로 조립된 금구류로 구성된 절연지지물인 애자는 전기적으로 충분한 절연내력을 가지게 하기 위하여 다수의 주름을 만들어 표면에 따른 거리를 크게 한다. 이는 표면이 습하였을 때, 염분이나 먼지 등이 부착하였을 때 절연내력이 저하되는 것을 방지하는 데 효과가 있다. 그리고 재질별(세라믹, 유리, 합성수지 등), 모양별(원판형, 원주형, 중공, 갓형 등), 용도별(전차 선로용, 발전소 또는 변전소용, 통신 선로용 등) 및 사용방법(현수용, 내장용, 인류용, 고정용 등)에 따라 다양하게 분류된다. 본 논문에서는 복합 애자류(composite insulators)의 여러 가지 성능평가 시험방법 중에서 복합 애자의 여러 계면과 연결 금구의 접속부(interfaces and connections of end fittings)에 대한 이상 유무를 확인하는 시험인 수분침투시험평가기술에 대해 고찰하였다.

• Journal of Radiation Protection and Research
• /
• v.13 no.2
• /
• pp.9-20
• /
• 1988

In order to quantify the contribution of cosmic-ray ionizing component to the dose given by natural background radiation, a series of measurement has been carried out using LiF TLDs for about one and a half years on quarterly basis. Three different types of LiF TLDs namely, chips and PTFE based disks of $^{7}LiF$, and the same disks of $^{6}LiF$ for identifying possible contribution of neutron component were used. Measurements were made by placing badge-incased TLDs in a lead castle of 10 to 15cm thick installed in a room on the third floor of a four-story building in CNU Daedeok campus for 5 cycles of 90 days. For comparison a series of spectrometric study was also performed for the energy region over 3MeV using a 3'${\phi}\;{\times}\;3$'NaI(Tl) scintillation detector in association with an MCA of 1024 channels, and it was found that the data obtained by the TLDs placed in the lead castle indicate 75% of the dose given by outdoor cosmic-ray component. The results obtained by the TLDs through correction for shielding loss show that the outdoor dose contribution of ionizing component of cosmic rays at this campus is $34.3{\pm}1.1nGy/h$ which satisfactorily agrees with that expected for our particular location of measurement.