• Explosives and Blasting
• /
• v.27 no.2
• /
• pp.12-18
• /
• 2009

Recently, several cases of destruction of old cylindrical silos by explosive demolition method have been reported. This study deals with the subject concerning the pre-weakening of a cylindrical concrete silo for the application of overturning explosive demolition method. In the past, the pre-weakening operation of structure in explosive demolition has been done by use of some empirical methods. These empirical approaches, however, have possibilities of unexpected accidents. In order to provide a guideline for the pre-weakening of cylindrical silos and similar structures, this paper shows the result of a case study, in which the instability of a silo due to pre-weakening is investigated by a numerical structural analysis before actually conducting pre-weakening and demolition operations.

• The Journal of the Acoustical Society of Korea
• /
• v.34 no.4
• /
• pp.257-263
• /
• 2015

Acoustic identification of inner materials in a single-layer cylindrical shell is investigated with acoustic resonance theory. The theoretical resonance peak frequencies for a cylindrical shell are little affected by the density variation, but remarkably changed by the sound speed variation of inner materials. Such acoustic dependency can be utilized to identify inner materials in a cylindrical shell. Acoustic resonance spectrogram for a single-layer cylindrical shell is theoretically plotted as functions of normalized frequency and sound speed of inner materials. The inner materials can be acoustically identified by overlapping acoustic resonance peaks from measured backscattering sound field on the spectrogram. To experimentally confirm this method, backscattering sound field of cylindrical shell filled with water, oil or ethylene glycol was measured in water tank. The inner materials could be identified by acoustic resonance peaks of the backscattering sound field monostatically measured with a transduce of 1.05 MHz center frequency.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.2
• /
• pp.104-114
• /
• 2004

A study was carried out to estimate the deformation of the set net according to the current by the model test in the circulation water channel. The tension of the frame line and the variation of net shapes were measured to investigate the deforming of the model set net in the flow. The results are obtained as follows; 1. The tensions (y) of the frame line according to the flow speed(x) from 0.0m/s to 0.6m/s were expressed by the experimental equation as follow : y= 1814.1x+115.12 2. In case of the upperward flow with fish court net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 79$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 56$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.42 and the second bag net was from 1.0 to 0.41, and deformed angle in the downward of the bag net was from 0$^{\circ}$ to 87$^{\circ}$. 3. In case of the upperward flow with bag net, deformed angle in the upperward net was changed from 0$^{\circ}$ to 60$^{\circ}$, the inclined passage net was from 0$^{\circ}$ to 13$^{\circ}$. Besides, the depth ratio of the first bag net changed from 1.0 to 0.27 and the second bag net was from 1.0 to 0.15. In the flow speed 0.3m/s, the inclined passage net rised up to the entry of the bag net and then prevented it more over 90% in 0.5m/s. A deformed angle in the downward of the fish court net was from 0$^{\circ}$ to 58$^{\circ}$. 4. To minimize the deformation of each part in model set net, it needs to attach the moving weight out of the fish court net, inclined passage net and bag net. Besides, it needs to adjust the tension of the net twine for the maintenance of the shape.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.4
• /
• pp.449-456
• /
• 2015

In this paper, attaching various damping plates to the cylindrical structure and performing numerical simulations try to study heave RAO and natural period for cylinder. Most of all, we identified heave RAO of the cylinder by simulations of the motion and the wave. And then, we performed numerical simulations by changing the size and shape of heave damping plate attached to the cylinder and reviewed the heave RAO and natural period for each case. The conclusions of this research are as follows. Firstly, the natural period of cylindrical structure is increased by attached to the cylinder with heave damping plate and the heave RAO of cylindrical structure is reduced in the peak period for incident wave by attached to the cylinder with from the size of 1.30D for heave damping plate. Secondly, circular plate has long natural period than Y-type plate in all of these sections. Finally, the motion response spectrum considering the marine environment of Piranema field was identified as the heave motion of cylindrical structure is remarkably reduced with both circular plate and Y-type plate in the peak period for incident wave.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.37 no.1
• /
• pp.24-34
• /
• 2001

The authors reconstruct a mooring type underwater positioning system to measure the movement of bag-net in a set-net by long base line mode with four transponders attached on the bag-net in latitudinal and a transponder fixed on the sea bed. To confirm the practical use of the system, the field experiments were carried out at the Jaran Bay, Kosung, Kyungnam Prov., on October 6, 2000 (neap tide) and November 28, 2000 (spring tide). And the vertical oscillation of bag-net was observed with three data loggers attached on the bottom of bag-net in longitudinal on November 28, 2000. The longitudinal movement range, the latitudinal one and the vertical one of the bag-net were 3.2 m, 3.4 m and 2.1 m. respectively. At the spring tide, these variations were 7.8 m, 7.8 m and 5.0 m, respectively. The vertical oscillation range about the bottom of the bag-net at near point of the slope net, at the middle part and at far point from the slope net were 3.2 m, 3.7 m and 8.4 m, respectively. The depth of the bottom net was decreased and its vertical oscillation appeared frequently when the current speed was more than 10 cm/s and the current direction was significantly different from the longitudinal axis of the bag-net. The variation of hydrophone coordinates measured by the transponder fixed on the sea bed presents that hydrophones equipped to the frame line of the set-net could be moved within several meters due to the tidal current. The fact indicates that the compensation of hydrophone coordinates is necessary to reduce the measuring errors. The position measuring errors of x, y and z axis of the system measured in the cage of aquaculture were 0.6 m, 0.8 m, and 1.2 m, respectively. And the errors of the transponders those were close to the base lines or placed in the baselines were smaller than those of others.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.40 no.4
• /
• pp.268-281
• /
• 2004

A study was carried out in order to estimate the deformation of the pound net according to the current by the model test in the circulating water channel. The tension of the frame rope and the variation of net shape were measured to investigate the deforming of the model pound net in the flow. The results are obtained as follows; 1. The experimental equation between tensions (R) of the frame rope and velocity (ν)was found to be R=$19.58v^{1.98}$($r^2$=0.98) in case of the upperward flow with fish court net and R=$26.90v^{1.72}$($r^2$=0.95)at the upperward flow with bag net according to the velocity from 0.0m/s to 0.6m/s, respectively. 2. As the variation of flow speed inside of the model net was gradually decreased according as which is passed through netting panels, in case of the upperward flow with fish court net, the flow speed was about 70% of initial flow speed at 0.1m/s, 60% at 0.2m/s, 50% at 0.3m/s and 40% 0.4~0.6m/s at the measurement point(h) inside of the first bag net, respectively. In case of the upperward flow with bag net, as the flow speed was steeply decreased according as which if passed through the second bag net, it was 30~60% of the initial flow speed and was 20~30% inside of the first bag net and was about 10~20% inside of the inclined passage net. 3. In case of the upperward flow with fish court net, the variation of deformed angle of fish court net was from 0$^{\circ}$ to 70$^{\circ}$and that of inclined passage net was from 0$^{\circ}$ to 63$^{\circ}$and that of the second bag net was from 0$^{\circ}$ to 47$^{\circ}$ . 4. In case of the upperward flow with fish court net, the variation of deformed angle of the second bag net was changed from 0$^{\circ}$ to 70$^{\circ}$and that of the inclined passage net was from 0$^{\circ}$ to 55$^{\circ}$ and that of the fish court net was from 0$^{\circ}$ to 50$^{\circ}$. The depth ratio of the first bag net was changed from 0% to 35% and that of the second bag net was from 0% to 20% and that of the inclined passage net was from 0% to 35%. In the flow speed 0.5m/s, the inclined passage net was raised up to the entry of the bag net and then prevented it more over 90%. 5. To be increased the opening volume of pound net, it needs to attach the added weight outside of the fish court net, inclined passage net and bag net. At the same time, it needs to adjust the tension of the twine for maintenance of the shape.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.1319-1324
• /
• 2006

최근 다양한 분야(건축, 디자인, 영화관)에서 활용되는 디스플레이 기술들은 대체로 평면에 투영하는 프로젝션 기술을 사용하고 있다. 예외적으로 평면이 아닌 곡면에 투영하는 경우도 있었으나, 기술적인 제약으로 왜곡된 영상을 보정하여 사용하는 경우는 드문 상태이다. 그리고 상호작용의 경우는 기계적 장치에 의존한 초보적 형태가 주류를 이루고 있다. 본 논문에서는 프로젝션 기술 중에서 원통형 곡면상으로의 투영 기법과 모션인식을 반영한 상호작용 기법에 대해서 논하고자 한다. 3D 영상을 곡면에 왜곡 없이 투영하기 위하여, 본 논문에서는 '2-pass 렌더링' 기법을 이용하였다. 이 기법에서는 현재 렌더링 된 영상을 텍스쳐로 저장한 다음 원통형 물체에 매핑시켜 곡면에 적합한 영상으로 보정한다. 그리고 기계적 장치에 의존하지 않는 상호작용을 위해, 카메라를 통하여 실시간으로 사용자 정보(위치, 방향 값)를 입력 받아 원통형 스크린과 매칭되는 좌표 값을 계산한다. 위와 같은 기법들을 구현하기 위한 실험으로 미디어 아트 작품을 제작하였으며, 투영과 상호작용에 관한 알고리즘을 작품에 적용하였다. 이 작품은 하나의 프로젝터를 사용하여 1/4 원통형 곡면으로의 투영과 상호작용을 수행하였다. 본 연구의 결과는 미디어 아트 작품의 프로젝션 모듈로 사용 될 수 있으며, 공연장 건축, 실내디자인, 체감형 인터랙티브 게임, 가상현실 영화관 등 다양한 분야에 적용 될 수 있다.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.3 s.73
• /
• pp.247-258
• /
• 2006

For the perforated cylindrical shell submerged in fluid, it is almost impossible to develop a finite element model due to the necessity of the fine meshing of the shell and the fluid at the same time. This necessitates the use of solid shell with equivalent material properties. Unfortunately the effective elastic constants are not found in any references even though the ASME code is suggesting those for perforated plate. Therefore in this study the equivalent material properties of perforated shell are suggested by performing several finite element analyses with respect to the ligament efficiencies.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.5
• /
• pp.431-436
• /
• 2003

In this paper, simulation results of an electromagnetic field and mode distributions in a cylindrical reverberation chamber were presented. Reverberation chamber is an alternative test facility for a semi anechoic chamber, which is widely used for the analysis and measurement of electromagnetic interference and immunity tests. The method of computing the number of modes in a cylindrical reverberation chamber was presented and the number of modes in a cylindrical reverberation chamber with the same volume was compared with the different ratio of radius to height. The FDTD method was used to produce field characteristics inside of rectangular, right-angled isosceles triangular, and cylinder type reverberation chambers with the same test volume.

• Journal of the Korean Vacuum Society
• /
• v.14 no.1
• /
• pp.7-16
• /
• 2005

Oil-Hydraulic pump consisting of swing twin-cylinder becomes to be used as a next generation of low vacuum pump. However, there is no enough flow-analysis for design improvement. It is essential to develope a numerical method for flow-analysis before manufacturing, in economic sense. Using a commercial code (Fluent), developed for flow-analysis, useful informations for design of pump were provided. Two-dimensional analysis has been performed to investigate the flow parameters such as pressure and velocity distributions between the swing twin-cylinder and the fixed cylinder. This numerical method will be used to design a better performance of pump consisting of swing twin-cylinder.