• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.97-103
• /
• 2013

This study proposes a path generation technique for simultaneous five-axis driving for ball bar measurement, which is equivalent to cone frustum machining as mentioned in the NAS979 standard. The technique is generalized for a 3D circular path, and it is applicable to all machine tools regardless of their structural configurations. A mathematical machine input model that consists of a five-axis machine tool, ball-bar measurement and conical path information as inputs is presented for easy NC code generation, simulation for various test conditions, and a measurement test. The movement range of rotary axes, which depends on various conditions, is mathematically analyzed based on the proposed conical path model. Moreover, the effect of the movement range on various conditions (apex angle and inclination angle, ball bar tilting acceptance angle, offset position of workpiece ball, etc.) is analyzed.

• The korean journal of orthodontics
• /
• v.38 no.1
• /
• pp.5-12
• /
• 2008

Objective: This study was designed to analyze the primary and secondary stability characteristics of orthodontic mini-screws of tapered design when compared with the cylinder mini-screw. Methods: A total of 48 mini-screws were placed into the buccal alveolar bone of the mandible in 6 male beagle dogs. Comparison was made between tapered and cylinder type mini-screws (Biomaterials Korea, Seoul, Korea). Maximum insertion torque (MIT) was measured using a torque sensor (Mark-10, MGT 50, USA) during installation, and maximum removal torque (MRT) was recorded after 3 and 12 weeks of loading. Results: Taper mini-screws showed a higher MIT value of 22.3 Ncm compared with cylinder mini-screw showing 13.6 Ncm (p < 0.001). The MRT of the taper mini-screw showed a significantly higher value of 9.1 Ncm than those of cylinder mini-screw of 5.7 Ncm at 3-weeks after installation (p < 0.05). However, there was no difference in the MRT value between the taper and cylinder mini-screws at 12 weeks of loading. Conclusions: These results showed that the high insertion torque of the taper mini-screw design increases initial stability until 3 weeks of loading, but does not have any effect on the secondary stability at 12 weeks of loading.

• Korean Journal of Plant Taxonomy
• /
• v.42 no.4
• /
• pp.294-306
• /
• 2012

Taxonomic study of the genus Hemerocallis (Liliaceae) in Korea was conducted based on morphological data. H. middendorffii was distinguished from its related taxon H. dumortieri by the trait of coriaceous long bract with green color. H. taeanensis was distinguished from its related taxon H. minor by its odorless flowers, longer perianth tube and leaf length. H. thunbergii was distinguished from its related taxon H. lilioasphodelus by its long perianth tube. Lastly, H. hakuunensis was distinct from its related taxon H. hongdoensis as a result of its extreme branching of scape and short leaf width. From this study, it was revealed that H. minor, H. lilioasphodelus, and H. dumortieri were distributed only in the northern part of the Korean peninsular.

• Korean Journal of Ichthyology
• /
• v.28 no.2
• /
• pp.67-71
• /
• 2016

Two Korean Rhodeus bittering fishes are known as having a unique reproduction system that the female deposits its egg inside freshwater mussels. Among them, R. ocellatus and R. uyekii show an ecological difference in feeding items and micro-habitat. Through a light microscope, the visual cells of the retina in the two species were investigated to get information between vision and environment related with habitat. The two fishes' eyes are spherical and R. ocellatus has relatively larger eyes. For the two species, the visual cells of the retina consisted of long single cones, short single cones, unequal double cones and rods. In the cones, all show a row mosaic pattern. Although the two species have a different micro-habitat in the wild, the component of the visual cells was very similar to each other.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.11
• /
• pp.943-951
• /
• 2015

Inertial sensors are important components of navigation system whose performance and reliability can be improved by specific sensor arrangement configuration. For the reliability of the system, Fault Detection and Isolation (FDI) is conducted by comparing each signal of arranged sensors and many arrangement configuration were suggested to optimize FDI performance of the system. In this paper, multiple conic configuration is suggested with optimal navigation condition and its FDI performance is analyzed by established Figure Of Merit (FOM) under the condition for navigation optimality. From FOM comparison, the multiple conic configuration is superior to former one in point of FDI.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.4
• /
• pp.211-221
• /
• 2020

The typical biomechanical properties of an internal conical connection (ICC) are axial displacement and loss of preload. The axial displacement of an ICC without a vertical stop can cause the loss of preload and a lowered occlusion. The stress of an ICC is concentrated on the contact interface of the abutment and not on the screw, and during placement, it is important to choose a wider coronal wall thickness as much as possible. The ICC should also be placed below the level of the bone crest. During the restoration of an ICC, care should be taken to ensure an appropriate abutment shape and an accurate connection. To get the best clinical results, it is important to select its wall thickness and place it in the appropriate position to restore it adequately.

• The Korean Journal of Zoology
• /
• v.37 no.1
• /
• pp.1-11
• /
• 1994

임신 26주, 27주의 생명력이 없는 한국인 태아 2예를 대상으로 십이지장 점막에서의 장내분비세포군집(일부 일본인 학자들이 명명한 "Segi's cap")의 출현, 형태 및 구조를 관찰하고. 이들 세포군집에서 내분비세포들의 존재 및 면역조직 화학적 특징들을 관찰하고자, 파라핀조직절편과 냉동박절 후 hematoxvlin과 eosin염색. Azan염색, Comori법, 그리고 면역조직화학염색 표본을 제작, 관찰하여 다음과 같은 결과들을 얻었다 세포들의 군집 형태는 장 내강을 향해서는 오목한 형태였고, 기저막을 향해서는 볼록한 형태였다. 군집을 이룬 세포들은 중층을 이루었고. 술잔세포도 장 내캉목에서 관찰되었다 또한. 내강쪽에 위치한 세포들의 경우 미세융모들의 줄무의가장자리는 관찰되지 않았다 Leuenkephalin, somatostatin, substance p, vasoactive intestinal polypeptide 및 5-HT 항혈청을 이용하여 면역조직염색한 결과 somatostatin 양성반응세포와 5-HT 양성반응세포만이 관찰되었다. 이들 somatostatin 양성반응 세포와 5-HT 양성반응세포들은 대개가 원추형의 세포들로서 개구형을 이루고 있음을 관찰한 수 있었다.관찰한 수 있었다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.751-753
• /
• 2010

본 논문에서는 위상차 현미경 영상 내 U87 세포의 정확한 형태학적 분류를 위한 이진 분류기 구축 방법을 제안한다. 본 방법은 Fourier descriptor 기반 세포형상 표현을 SVM 이진분류기 구축에 사용함으로써 분류 대상인 원추형과 원형세포에 대해 영상 내 세포의 위치와 회전, 크기의 변화에 대해 강인한 분류성능을 제공한다. 본 실험을 통해 polynomial 커널에서 학습된 SVM 분류기가 linear, RBF, sigmoid 에 비교하여 가장 정확한 분류 성능을 보임을 확인하였다. 본 연구는 논문상 기준인 두 종류의 세포 형태 분류기를 기반 프레임워크로 삼아 좀더 다양한 세포 형태를 분류할 수 있도록 개선된다면 악성뇌종양의 전이억제치료에 효과적인 전이행동분석에 도움을 줄 수 있을 것으로 기대된다.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.1
• /
• pp.13-18
• /
• 2002

The morphorogical characteristics of the Morus tiliaefolia growing wild in the Korean peninsula are as follows. The chromosome number of somatic cell is 2n=84,that is hexaploid. The shape of male inflorescence is a long cylinder shape of 3.6∼6.0 cm. The length of female inflorescence is 1.8 cm, red violet or violet and the weight of mulberry fruits is 1.39∼1.65 g. The winter bud is very big in comparison with the branch and the accessory bud does not exist. The leaf is big and lobed leaf or entire leaf, the density of lenticell is 9.42$\pm$1.29 ㎠. The length of leaf trichome is 236∼438 ㎛ and the distribution density is 16∼37/25 ㎟ and heigh density of leaf back. The trichome shape of the leaf surface is cylinder shaped, in the leaf back it is thin and long corn shaped.

• Korean Journal of Plant Taxonomy
• /
• v.35 no.4
• /
• pp.313-335
• /
• 2005

Many plants take up soluble silica from the soil, and they deposit in plant tissues. Silica bodies are most commonly found in the leaf epidermis. Silica body is important factor in growth and development of plant. It help to maintain rigidity in stem and linear leaves, and its content may be correlated with resistance to fungal disease. In this study, several morphologically distinctive forms of silica bodies on Cyperaceae in Korea are recognized, which are eventually classified into two groups. Silica body type of first group (Rhynchospora, Fuirena, Scleria, Carex, Eriophorum) is A-type, which is conical in shape. Silica body type of second group (Cyperus, Scirpus, Eleocharis, Fimbristylis, Kyllinga, Bulbostylis, Lipocarpha) is B-type, which is conical in shape with numerous satellite body. These types are consistent enough to use as characters in taxonomic studies within genus. Silica body type may be associated with habitat: the species in dry region have A-type, whereas the species in wet region have B-type. These results suggested that shapes and presence or absence of silica body might be valuable to systematic analysis.