• Journal of the Korean Vacuum Society
• /
• v.12 no.3
• /
• pp.174-181
• /
• 2003

Ta diffusion barriers have been deposited on Si (100) substrate by applying a negative substrate bias voltage. The effect of the substrate bias voltage on the properties of the Ta films was investigated. In the case of the Ta films deposited without the substrate bias voltage, a columnar structure and small grains were observed distinctly, and the electrical resistivity of the deposited Ta films was very high (250 $\mu\Omega$cm). By applying the substrate bias voltage, no clear columnar structure and grain boundary were observed. The resistivity of the Ta films decreased remarkably and at a bias voltage of -125 V, reaching a minimum value of 40 $\mu\Omega$cm, which is close to that of Ta bulk (13 $\mu\Omega$cm). The thermal stability of Cu(100 mm)/Ta(50 mm)/Si structures was evaluated after annealing in H2 atmosphere for 60 min at various temperatures. The Ta films deposited by applying the substrate bias voltage were found to be stable up to $600^{\circ}C$, while the Ta films deposited without the substrate bias voltage degraded at $400^{\circ}C$.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.6
• /
• pp.651-657
• /
• 2011

There exists a high correlation between the ionospheric delays and the integer ambiguity in GPS observation equation, so that the sufficient time span is required to revolve the integer ambiguity. This means that the ambiguity resolution plays a key role especially in rapid-static positioning mode. To analyze the effect of ionospheric disturbances on the positioning accuracy, 02/19/2011 day of dataset was selected processed in rapid-static positioning mode. The total of 141 30-minute sessions were processed, i.e., the estimation procedure started every 10 minutes, and the time-to-fix information of each data interval is obtained. In this study, the analysis is performed by comparing the time-to-fix with the magnitudes of ionospheric delays. The computed correlation coefficient between the time-to-fix and the magnitudes of ionospheric delays is 0.31, which indicates the ionospheric disturbances affect the positioning accuracy in rapid-static positioning mode. Therefore, it is required to collect and process sufficient data when the GPS surveying is performed in unfavorable ionospheric conditions.

• Applied Biological Chemistry
• /
• v.44 no.4
• /
• pp.257-261
• /
• 2001

Leather (skin & hide) is a body organ, comprising 3 to 5% of the animals weight. The cross-section of a leather is composed of two major divisions: the epidermis or grain layer and the corium or split layer. The leather is naturally covered with bacteria and fungi, because it is a particularly rich source of a wide variety of microorganisms. Stains or coatings of different colours occur in patches or over large areas, depending on the type of mould spore infestation. We examined the antibiotic effect of leather after washing. Upon applying equal fungicide, antibiotic effects increased as follows: grain layer>middle layer>flesh layer. Antibiotic effect decreased with increasing frequency of washing. Decrease in antibiotic effect was lower in OITZ fungicide than in TCMTB and CMK fungicides. Sulfated fatliquor showed higher antibiotic effect than phosphated fatliquor.

• Fire Science and Engineering
• /
• v.23 no.1
• /
• pp.48-54
• /
• 2009

The present study has been performed to investigate the effect of statistical number of droplets on the simulation of the sprinkler spray using fire field model. In order to simulate the sprinkler spray characteristics, the present study uses NIST Fire Dynamics Simulator version 5.2. A group of Lagrangian particles with similar droplet characteristics, such as diameter, velocity, temperature and so on, is represented by parcel concept to decrease the total number of droplets tracked in the simulation. The present study introduces a new parameter to represent the ratio between real number of droplets and computational parcels. The dependency of the number of parcels on the fire suppression characteristics and spray patterns is quantitatively examined for different ratio between the real number of droplets and computational parcels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.159-160
• /
• 2012

지난 30년 동안 플래시 메모리의 주류 역할을 하였던 부유 게이트 플래시 메모리는 40 nm 기술 노드 이하에서 셀간 간섭, 터널 산화막의 누설전류 등에 의한 오동작으로 기술적 한계를 맞게 되었다. 또한 기존의 비휘발성 메모리는 동작 시 높은 전압을 요구하므로 전력소비 측면에서도 취약한 단점이 있다. 그러나 이러한 문제점들을 기존의 Si기반의 소자기술이 아닌 새로운 재료나 공정을 통해서 해결하려는 연구가 최근 활발하게 진행되고 있다. 특히, 플래시 메모리의 중요한 구성요소의 하나인 터널 산화막은 메모리 소자의 크기가 줄어듦에 따라서 SiO2단층 구조로서는 7 nm 이하에서 stress induced leakage current (SILC), 직접 터널링 전류의 증가와 같은 많은 문제점들이 발생한다. 한편, 기존의 부유 게이트 타입의 메모리를 대신할 것으로 기대되는 전하 포획형 메모리는 쓰기/지우기 속도를 향상시킬 수 있으며 소자의 축소화에도 셀간 간섭이 일어나지 않으므로 부유 게이트 플래시 메모리를 대체할 수 있는 기술로 주목받고 있다. 특히, TBM (tunnel barrier engineered memory) 소자는 유전율이 큰 절연막을 적층하여 전계에 대한 터널 산화막의 민감도를 증가시키고, 적층된 물리적 두께의 증가에 의해 메모리의 데이터 유지 특성을 크게 개선시킬 수 있는 기술로 관심이 증가하고 있다. 본 연구에서는 Si3N4/Ta2O5를 적층시킨 staggered구조의 tunnel barrier를 제안하였고, Si기판 위에 tunnel layer로 Si3N4를 Low Pressure Chemical Vapor Deposition (LPCVD) 방법과 Ta2O5를 RF Sputtering 방법으로 각각 3/3 nm 증착한 후 e-beam evaporation을 이용하여 게이트 전극으로 Al을 150 nm 증착하여 MIS- capacitor구조의 메모리 소자를 제작하여 동작 특성을 평가하였다. 또한, Si3N4/Ta2O5 staggered tunnel barrier 형성 후의 후속 열처리에 따른 전기적 특성의 개선효과를 확인하였다.

• Journal of the Korean Geotechnical Society
• /
• v.20 no.3
• /
• pp.13-22
• /
• 2004

In case of the lateral movement accurring at soft ground where a row of piles are installed, the crown failure at external arch zone of soil arching is firstly developed, and the cap failure at wedge zone in front of piles is lastly developed. Therefore, the lateral earth pressure acting on a row of piles due to soil movement should be calculated in each condition of crown and cap failures around piles. A theoretical equation of crown failure can be proposed using a cylindrical cavity expansion theory. The theoretical equation of crown failure is mainly affected by two factors. One is related to soil properties such as internal friction angle, cohesion and horizontal pressure, and the other is related to pile factors such as diameter, installation interval. Meanwhile, the yield range of lateral earth pressure is established in the estimation of theoretical equation based on crown and cap failures around piles. The theoretical values based on crown and cap failures are compared with the experimental values. The experimental values are located in the range proposed by theoretical values. Thus, it is confirmed that the theoretical values proposed in the study are very reasonable.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.13 no.2
• /
• pp.179-187
• /
• 2000

When one considers the property of the axisymmetry, an analysis of an axisymmetric shell subjected to unaxisymmetric loading can be employed to save time and computer memory space. If one considers the Fourier series of the circumference direction of loads and displacements, an axisymmetric tank subjected to a nonaxisymmetric load can be treated as a frame element. Using the Fourier series, the authors derived the stiffness matrix of the cylindrical shell subjected to unaxisymmetric loading by the usual finite element method, and converted the stiffness matrix of a frame element into a transfer matrix by rearranging the stiffness matrix to apply the transfer matrix method. Here the most significant purpose of this paper is to achieve the fewest number of simultaneous equations for analysing an axisymmetric shell subjected to a nonaxisymmetric load. The results of the proposed method of the analysis of the cylindrical shell subjected to a wind load and a water load show no differences when compared to the other methods.

• Journal of Veterinary Clinics
• /
• v.28 no.3
• /
• pp.332-335
• /
• 2011

A 6-year-old castrated male domestic short hair cat with the clinical signs of anorexia and vomiting was admitted to the local animal hospital. Abdominal radiography and ultrasonography revealed renomegaly and severe hydronephrosis in the right kidney. Surgically excised right kidney was submitted for diagnosis. On the cut surface, two milky white masses and severe dilation of renal pelvis were observed. Most of the neoplastic masses were composed of uniform well differentiated tubules lined by a single layer of cuboidal to columnar cells and projected papillae into the lumen. The neoplastic cells were strong positive for cytokeratin (CK) MNF116, but negative for CK 7. Based on the clinical and gross findings, histopathology and immunohistochemistry, this case was diagnosed as papillary renal adenoma with hydronephrosis.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.9 no.3
• /
• pp.93-103
• /
• 2001

Once of recent issue in the leather industry is disposal of shaving scrap containing chromium. Shaving scrap is indispensible generated by control of the final thickness in the leather making process. It is the flesh layer of the skin consisting mainly of collagen. More recently, we have tried to improve the quality of the isolated gelatin. The purpose of this research was to extract gelatin for agricultural usage. As a result, it does not contain Cr and could obtained to a good gelatin that have more than 130,000Da. average molecular weight, more than 30 mps viscosity and more than 100g jelly strength. Gelatin that is extracted by alkaline condition expected to be available to high performance gelatin such as material of organic fertilizer(ex, Nitrogen-release fertilizer).

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.12
• /
• pp.130-139
• /
• 2014

Undesired camera shaking can make a blur effect, which causes a degradation of video quality. We propose an efficient method of removing the blur effects on video captured from a single camera. The proposed method has a sequential process that is applied to each frame. The first stage is to estimate the camera motion for each frame. In order to estimate the camera motion, we compute the optical flow using 3 consecutive frames. Then a patch-wise image deconvolution is applied. During the deconvolution, edge prediction is used to improve the quality of image deconvolution. After patch-wise image deconvolution, deblurred patches are integrated into an image to produce a deblurred frame. The above process is performed for each frame. The experimental result shows that the proposed method removes the blur effect efficiently.