• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.669-673
• /
• 2012

제방안전성 모니터링은 제방파괴로부터 국민의 생명과 재산을 보호하는데 필요한 정보를 얻을 수 있는 하나의 방법이 될 수 있다. 근래에 미국은 2005년 허리케인 카타리나에 의해 2,000여명의 인명손실을 경험하였고 2011년 3월 일본은 도후쿠지역의 초강력 지진에 의한 쓰나미로 인해 수만명의 인명과 후쿠시마 원자력 발전소의 침수로 지금까지 방사능 누출 차단작업을 벌이고 있다. 국내에서는 4대강 복원사업으로 주요 국가 하천 구간에서 홍수 및 체제 불안정에 의한 제방붕괴사고위험이 현격하게 줄어들었으나 제방의 안전성은 더욱 강조되고 있다. 즉 신설된 보 주변, 배수통문 신설구간 그리고 제방누수 예상지점 등에서는 아직 안전한 상태라고 확신할 수 없으며 지속적인 모니터링이 요구된다. 따라서 본 연구에서는 광섬유를 이용하여 개발한 간극수압 및 온도 센서 등을 위험예상지점에 설치하고 정보시스템을 통하여 어떻게 관리 할 것인가에 대한 사전 검토를 계획하였다. 이를 위하여 제방에 센서를 설치하기 전에 주요 검토사항에 대하여 연구분석하였다. 주요 검토사항에는 설치하고자 하는 지점의 제방거동 메커니즘 예측, 왜 계측시스템을 설치하는지에 대한 목적에 대한 평가, 설치 지점의 제방의 토질공학적 문제점 파악, 모니터링 대상 매개변수 혹은 항목 선정, 조사대상 항목의 변화정도를 예측하여 거동 범위 확정, 적정 계측기기 설치 지점을 선청, 계측기기 선정, 자동화 혹은 실시간 정보시스템에 필요한 사항 결정, 관측에 영향을 미치는 인자들의 기록 계획, 정보의 타당성 확보를 위한 필요사항 정립, 비용의 결정, 장기 예측 계획, 정기 검 보정 및 관리 계획, 자료수집 및 관리계획, 자원의 공조 및 생애주기 비용 등을 포함하였다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.811-814
• /
• 2014

일본 후쿠시마 제일 원자력발전소의 대지진/쓰나미에 이은 원자로 건물 수소폭발 사고의 수습 과정에서 사용후 핵연료 저장조에 보관되어 있는 핵연료의 안전문제가 대두되었다. 사용후 핵연료의 잔열 성분을 냉각시키고, 그리고 사용후 핵연료가 방출하는 고선량 방사선을 차폐시키기 위해서 일정 깊이 이상의 수조에 사용후 핵연료를 저장한다. 사용후 핵연료 저장조에 냉각수 공급이 중단되면, 사용후 핵연료의 고유 잔열에 의해 수조의 물이 증발하여 수위가 감소하게 된다. 계속해서 냉각수 공급이 되지 않으면, 사용후 핵연료의 잔열은 증가하게 되고, 수조의 물은 비등하여 증발은 가속화 된다. 사용후 핵연료 저장조의 수위가 고갈되면 고선량의 감마선이 방출된다. 수조의 수위가 정상적일 경우 사용후 핵연료 저장조의 공기중 감마선 선량율은 0.15mSv/h 이다. 수조의 수위가 사용후 핵연료 상부 꼭대기를 기준으로 2m, 1m, 및 0m (핵연료 노출) 로 감소하게 되면, 사용후 핵연료 저장조의 공기중 감마선 선량율은 500mSv/h, 50Sv/h, 및 5kSv/h 로, 급격히 증가한다. 본 논문에서는 사용후 핵연료 저장조 감시카메라의 관측 성능을 평가하기 위해, 고성능 칼라 CCD 카메라에 대해서 1 kGy/h 의 고선량율로 감마선 조사실험을 수행하였다. 이에 대한 실험결과를 기술한다.

• Nuclear Engineering and Technology
• /
• v.26 no.4
• /
• pp.493-501
• /
• 1994

An experimental study has been peformed on the pool-boiling critical heat flux (CHF) phenomenon on downward -facing plates. The CHF for inclinations of -90$^{\circ}$(horizontally downward position), -88$^{\circ}$, -86$^{\circ}$, -84$^{\circ}$, -60$^{\circ}$ and -40$^{\circ}$ were measured using plate-type test sections of 20mm 200mm and 25mm 200mm in a pool of saturated water under atmospheric pressure. The measured CHF was lower for the wider test section and decreased as its orientation approached to the horizontally downward position. The lower CHF can be attributable to the increased difficulty for the bubbles in escaping from the heater surface. When compared with the previous works, the overall trends were similar; however, a transition angle, at which the decrease rate in the CHF was changed, was observed in the vicinity of -80$^{\circ}$.

• Nuclear Engineering and Technology
• /
• v.16 no.3
• /
• pp.125-130
• /
• 1984

In the application of the RETRAN code to the analysis of very small LOCA one of main concerns is placed on use of the bubble rise model in the upper plenum, because the bubble rise model nay cause a numerical divergence problem and coefficients used to describe it are based on experimental results of large LOCA. In order to solve this problem, a method, which enables us to predict the mixture level in the upper plenum without use of the bubble rise model, was proposed. For this method the local void distribution in the core and upper plenum was derived by using a simplified slip model. It was shown that results predicted from the derived equation are in excellent agreement with experimental data. Additionally it was found that local void in the upper plenum has a uniform distribution unlike a linear distribution in large LOCA. Communication between the upper plenum and upper head was investigated. By introducing the concept of Taylor instability, it was proved that counter-current Hon between them is possible.

• Nuclear Engineering and Technology
• /
• v.14 no.2
• /
• pp.86-91
• /
• 1982

In 1977, spent fuel storage capacity of Ko-Ri Unit 1 was raised to contain 4-2/3 core, by reducing the center-to-center spacing between fuel assemblies from 53.34cm to 36cm. In this paper the adequacy is discussed in detail by examining the previous design analysis report. According to the analytic method presented by Core Performance Branch, study on credible abnormal moderator density condition is performed by using KENO-IV for the redesigned spent fuel storage facility. Result shows that 36cm for the center-to-center spacing between fuel assemblies is not enough to keep the storage safe at water density of 0.1143g/㎤, which gives the maximum $K_{eff}$ 0.9958$\pm$0.0048, which exceeds the CPB regulation limit 0.98. From sensitivity study regarding to the center-to-center spacing, it should be maintained to space greater than 43cm in order to meet the CPB requirements.s.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.5
• /
• pp.554-560
• /
• 2021

CRUD (chalk river unidentified deposits) is a porous material deposited on the surface of nuclear fuel during nuclear power plant operation. The CRUD is composed of metal oxides, such as iron, nickel, and chromium. It is essential to investigate the effects of the CRUD layer on the wall heat transfer between the nuclear fuel surface and the coolant in the event of a nuclear accident. CRUD only negatively affects the temperature of the nuclear fuel due to heat resistance because the effects of the CRUD layer on two-phase boiling heat transfer are not considered. In this study, the physical property models for the porous CRUD layer were developed and implemented into the SPACE code. The effects of boiling heat transfer models on the peak cladding temperature and quenching were investigated by simulating a reflood experiment. The calculation results showed some positive effects of the CRUD layer.

• Cross-Cultural Studies
• /
• v.51
• /
• pp.213-233
• /
• 2018

Representing the future of language is a very difficult but important issue, because it signifies a world of language different from the present; at the same time it secures the identity of the present language between the future changed language and the present one. This paper examines the linguistic world of dystopia, focusing on the "Fuji-no-shima" and "Gentoshi" of Yoko Tawada. First of all, "Fuji-no-shima" shows that, for Yoko Tawada, who was crossing the border between German and Japanese as a bilingual writer, the accidental Fukushima nuclear power generation in 2011 was accepted as the destruction of verbal order between signifiant and $signifi{\acute{e}}$, due to physical changes caused by radiation leaks. "Gentoshi" tells that human ties can be maintained through language activities that can capture multiple meanings, even in a world where traditional language order is destroyed through a policy of seclusion. From the above discussion, the novel Distopia, can actually be called Utopia as long as humans rely on the power of various languages to sustain it.

• Journal of Internet Computing and Services
• /
• v.20 no.3
• /
• pp.1-11
• /
• 2019

Today's software systems are becoming larger and more complicated, and the risk of accidents and failures have also grown larger. Software failures and accidents in industrial fields such as automobiles, nuclear power plants, railroad industries, etc. may lead to severe damage of property and human life. The safety-related international standards, such as IEC 61508 have been established and applied to industries for decades. The safety life cycle specified in the standards emphasize the activities to develop safety requirements through hazard and risk analysis in the early stage of software development. In this paper, we propose 'Hazard Analysis Process based on STPA using SysML' in order to ensure the safety of software at the early stage of software development. The proposed hazard analysis can be effectively performed minimizing the loss of hazard by using the BDD and the IBD of SysML to define the control structure of a system. The proposed method also improves the specification of the safety constraints(requirement) by using SD. As a result, it is possible to identify the hazard without missing and identify the hazard scenarios in detail, and safety can be sufficiently ensured in the early stage of software development.

• Journal of the Korean Society of Safety
• /
• v.37 no.2
• /
• pp.35-42
• /
• 2022

When an accident occurs, the associated human activity is typically regarded as a "human error," or a temporal deviation. On the other hand, if the accident results in a serious loss or if it evokes a social issue, the person determined to be responsible may be punished with a "violation" of related laws or regulations. However, as Heinrich stated, it is neither appropriate nor reasonable in terms of probability theory and cognitive science to distinguish whether it is a "human error" or a "violation" with a criterion of resultant accident severity. Nonetheless, some in society get on the social climate to strengthen regulations on workers who have caused accidents, especially violations. This response can present a social issue due to the lack of systematic judgment procedure which distinguishes violations from human errors. The purpose of this study was to develop an objective and systematic procedure to assess whether workers' activities which induced industrial accidents should be categorized as violations rather than human errors. Various analysis techniques for the determination of violation procedure were investigated and compared using an analysis approach method. An appropriate technique was not found, however, for judging the culpability of intentional violations. As an alternative, this study developed the process of creating violations, based on cognitive procedure, as well as the criteria to determine and categorize an activity as a violation. In addition, the developed procedure was applied to cases of industrial accidents and nuclear power plant issues to test its practical applicability. The study demonstrated that the proposed model could be used to determine the existence of a violation even in the case of multiple workers who work simultaneously.

• Journal of Internet Computing and Services
• /
• v.23 no.3
• /
• pp.1-12
• /
• 2022

As the performance of Unmanned Aerial Vehicles (UAVs) are improving and the prices are lowering, it is expected that the use of UAVs will continuously grow in the future. It is important to always maintain control signal and video communication to operate remote UAVs stably, especially in military UAV operations, as unexpected jamming attacks can result in fatal UAV crashes. In this paper, to improve the network reliability and low latency when supporting UAV operations, the anti-jamming performance of Second generation Anti-jam Tactical UHF Radio for NATO (SATURN) networks is analyzed and enhanced by applying Forward Error Correction (FEC) and Minimum Shift Keying (MSK) modulation as well as Hamming code based multiple transmission techniques.