• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.4
• /
• pp.131-145
• /
• 2019

Korea has set up a radiation emergency planning zone based on the 「Act on Physical Protection and Radiological Emergency」 to protect residents living near nuclear power plants in the event of nuclear disasters. Little research has been conducted on the appropriateness of existing nuclear evacuation facilities because of a general lack of interest in nuclear accidents. This research addresses this gap by analyzing the location adequacy of evacuation facilities in Busan's emergency protection planning area based on vulnerable populations and accessibility analyses. The Gijang-gun which has the greatest risk, shows that only 4.05% of the total urban area was included in the evacuation service area within 5 minutes while only 36.93% of Geumjeong-gu and 37.23% of Haeundae-gu were included in the evacuation-enabled area. In addition, evaluation facilities in the elderly population hotspots were lacking, and there was a wide gap between dongs within the same Gu. Thus, additional evacuation facilities need to be designated and installed considering the spatial equity between areas and safety of both the public and vulnerable populations.

• Journal of Radiation Protection and Research
• /
• v.31 no.4
• /
• pp.211-217
• /
• 2006

For more realistic assessment of Korean food chain radiation doses due to the operation of nuclear facilities, it is required to use domestically produced data for radionuclide transfer parameters in crop plants. This paper analyzed results of last about 10 year's studies on radionuclide transfer parameters in major crop plants by the Korean Atomic Energy Research Institute, comparing with the published international data, and consequently suggested the proper parameters to use. The trends of transfer parameter shows normal distributions if we have a lot of experimental data, but some radionuclides showed enormous variations with the environment of experimental, crops and soils. These transfer factors can be used to assess realistic radiation doses or to predict the doses in crops for normal operation or accidental release. Some kinds of parameter can be produced as conservatives or fragmentary results because soil-to-plant transfer factors were measured through greenhouse experiments which sometimes showed improper field situations. But these parameters mentioned in this paper can be representative of the status of Korean food chain than that of foreign country.

• Korean Journal of Construction Engineering and Management
• /
• v.16 no.3
• /
• pp.101-112
• /
• 2015

In the 1950s, the concept of configuration management (CM) was started by the US Department of Defense (DOD). Later, it has begun to be applied in aerospace, software, engineering, construction, and nuclear power industry. However, configuration management (CM) in the Korean nuclear industry was firstly utilized in 2006 only for selected parts of facilities, while the US nuclear industry has applied CM for the facilities' entire systems since 1990s. Furthermore, configuration management (CM) is in its conceptual stage in the Korean nuclear industry because of ambiguous CM concepts, lacks of CM professional manpower, non-computerization, and inadequacy of CM procedures and processes. In order to address this issues, seven industries (including defense, aerospace, software, engineering, architecture, civil engineering, nuclear power) that utilize the concept of configuration management (CM) were compared and analyzed based on the CM purpose, technique, and life-cycle perspectives. By an extensive literature review and expert interviews, this paper developed a framework of configuration management (CM) for the nuclear industry. And also, a list of functions based on life-cycle stages and CM techniques are developed for clarifying CM framework in order to promote practical applications.

• Journal of Energy Engineering
• /
• v.21 no.1
• /
• pp.75-80
• /
• 2012

In this paper a realistic bounding method for flooding analysis following rupture of large size of thanks and piping is defined. Mass and energy release during main feedwater line break accident is analyzed with RETRAN code. It is modeled that the main feed water control valve is closed in 5.0 seconds after reactor trip. In result of the analysis, largest mass and energy is discharged at 70% reactor power. The flood sources for main feedwater room are calculated when piping failure occurs in the high energy line and medium energy line. Based on the result of flood level (1.43m), it is investigated that all of the safety-related environmental qualification equipments are well located above the flood level.

• Nuclear Engineering and Technology
• /
• v.12 no.2
• /
• pp.88-98
• /
• 1980

The process of solidification of a single-phase flowing hot fluid in a cylindrical tube has been investigated analytically and experimentally. A series of tests were performed, using paraffin -wax and Wood's metal as flowing hot fluids. These data verified the existing quasistatic numerical analysis model of freezing process developed at Brookhaven National Laboratory In addition, experimental results provided information regarding the effects of various parameters on the .process of transient flowing and freezing through a vertical channel. The experimental apparatus and techniques are described. Comparison of experimental data with predictions of mathematical models for transient molten fluid displacement are presented in graphical form. In addition, the mathematical model is applied to LMFBR post-accident conditions.

• Journal of Korean Institute of Industrial Engineers
• /
• v.16 no.2
• /
• pp.135-147
• /
• 1990

A nuclear power plant can be viewed as a large complex man-machine system where high system reliability is obtained by ensuring that sub-systems are designed to operate at a very high level of performance. The chance of severe accident involving at least partial core-melt is very low but once it happens the consequence is very catastrophic. The prediction of risk in low probability, high-risk incidents must be examined in the contest of general engineering knowledge and operational experience. Engineering knowledge forms part of the prior information that must be quantified and then updated by statistical evidence gathered from operational experience. Recently, Bayesian procedures have been used to estimate rate of accident and to predict future risks. The Bayesian procedure has advantages in that it efficiently incorporates experts opinions and, if properly applied, it adaptively updates the model parameters such as the rate or probability of accidents. But at the same time it has the disadvantages of computational complexity. The predictive distribution for the time to next incident can not always be expected to end up with a nice closed form even with conjugate priors. Thus we often encounter a numerical integration problem with high dimensions to obtain a predictive distribution, which is practically unsolvable for a model that involves many parameters. In order to circumvent this difficulty, we propose a method of approximation that essentially breaks down a problem involving many integrations into several repetitive steps so that each step involves only a small number of integrations.

• Journal of the Korean Society of Safety
• /
• v.29 no.6
• /
• pp.172-178
• /
• 2014

In terms of an accident management, the cases causing severe core damage need to be analyzed and arranged systematically for an easy access to the results since the Three Mile Island (TMI) accident. The objectives of this paper are to explain how to identify the plant response and cope with its vulnerabilities using the probabilistic safety assessment (PSA) quantified results and severe accident database SARDB(Severe Accident Risk Data Bank) based on sequences analysis results. Although PSA has been performed for the Korean Standard Power Plants (KSNPs), and that it considered the necessary sequences for an assessment of the containment integrity. The developed Database (DB) system includes a graphical display for a plant and equipment status, previous research results by a knowledge-based technique, and the expected plant behaviour. The plant model used in this paper is oriented to the cases of loss of coolant accident (LOCA) is be used as a training simulator for a severe accident management.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.9 no.1
• /
• pp.35-39
• /
• 2013

The Operating Experience Report(OER) has written about the event and accident happened at a Nuclear Power Plant(NPP). The purpose of publishing the OER is to prevent the similar event or accident repeatedly by spreading the experience of a single plant to other plants personnel. Before initiating the analysis mentioned in this paper, 2,298 review reports for the same number of OER published from 2007 to June 2012 have been written to achieve the correct and objective statistics. The analysis introduced in this paper is performed with the various factors such as year, plant type, equipment, type of work, root-cause. The root-cause analysis is showed that the equipment problem is the major factor in domestic NPPs, but on the other hand human-error is the main part of the foreign NPPs. Moreover, while the number of the man-made event is decreasing, the equipment-made event is rapidly increasing in domestic NPPs.

• Journal of Energy Engineering
• /
• v.26 no.2
• /
• pp.50-63
• /
• 2017

Safety culture degradation signs in nuclear power plants with complex and diverse systems can lead to their equipments performance deterioration. If these signs are neglected, they become potential causes of accidents. Therefore, it is necessary to monitor safety culture in the point of view of organization and management as well as to evaluate safety performance of nuclear power plants. Therefore, This paper suggested a methodology to evaluate safety culture weakness contributing the accidents' root causes in the case accidents occur at nuclear power plants. After reviewing methodologies using at domestic and international industry, the methodology suitable for domestic nuclear power plants was determined.

• Nuclear Engineering and Technology
• /
• v.25 no.2
• /
• pp.215-221
• /
• 1993

A required initial condition for a steam explosion to occur following core meltdown accidents of a nuclear power plant is the formation of a coarse mixture of molten fuel and water. The extent of a premixing is the measure of efficiency of steam explosion that may follow. A simple one-dimensional, transient model and the flooding criteria have been applied to evaluate the fuel/coolant mixing limit. Also, both instant breakup and dynamic breakup models for the mixing process have been separately used here and compared each other. The results indicate that fuel temperature, ambient pressure, mixing diameter, water depth, and pouring diameter are the important parameters affecting the mixing behavior.