• Nuclear Engineering and Technology
• /
• v.25 no.1
• /
• pp.91-101
• /
• 1993

To predict accurately the thermal hydraulic behavior of light water reactors during normal or abnormal operation, the accurate estimation of the void distribution is required. Up to date, many techniques for predicting void fraction of two-phase flow systems have been suggested. Among these techniques, the drift-flux model is widely used because of its exact calculation ability and simplicity. However, to get more accurate prediction of void fraction using drift-flux model, slip and flow regime effects must be considered more properly In the drift-flux method, these two effects are accounted for by two drift-flux parameters ; $C_{o}$ and (equation omitted). At earlier stage, $C_{o}$ is measured in a circular tube. In this study, $C_{o}$ is experimentally determined by measuring local void fraction and vapor velocity distribution in a rectangular subchannel having 4 heating rods which simulates nuclear subchannels. The measurements are peformed with two-electrical conductivity probes which are known to be adequate for measuring local parameters. The experiments are performed at low flow rate and the system pressure less than 3 atmo spheric pressure. In this experiment, (equation omitted), is not measured, but quoted from well-known empirical correlation to formulate $C_{o}$. Finally, $C_{o}$ is expressed as a function of channel averaged void fraction. fraction.

• Journal of the Korean Society of Radiology
• /
• v.15 no.5
• /
• pp.697-704
• /
• 2021

It is hard to get Filaments which are materials of the 3D printing Fused Deposition Modeling(FDM) method as radiation shielding in Korea. and also related research is insufficient. This study aims to provide basic data for the development of radiation shields using 3D printing by evaluating the physical properties and radiation shielding capabilities of filaments containing metal particles. after selecting five metal filaments containing metal particle reinforcement materials, the radiation shielding rate was calculated according to the Korean Industrial Standard's protective equipment test method to evaluate physical properties such as tensile strength, density, X-ray Diffraction(XRD), and weight measurement using ASTM's evaluation method. In the tensile strength evaluation, PLA + SS was the highest, ABS + W was the lowest, and ABS + W is 3.13 g/cm³ which value was the highest among the composite filaments in the density evaluation. As a result of the XRD, it may be confirmed that the XRD peak pattern of the particles on the surface of the specimen coincides with the pattern of each particle reinforcing material powder metal, and thus it was confirmed that the printed specimen contained powder metal. The shielding effect for each 3D printed composite filament was found to have a high shielding rate in proportion to the effective atomic number and density in the order of ABS + W, ABS + Bi, PLA+SS, PLA + Cu, and PLA + Al. In this study, it was confirmed that the metal particle composite filament containing metal powder as a reinforcing material has radiation shielding ability, and the possibility of using a radiation shielding filament in the future.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.32 no.1
• /
• pp.7-11
• /
• 2022

Recently, Hanmi Gemological Institute & Laboratory (HGI) had an opportunity to examine 5 transparent synthetic moissanite. The round brilliants ranged from 0.93 to 0.96 ct and had a colorless, pink, yellow, blue, and red color. Advanced testing results, including Fourier-transform infrared (FTIR) and Raman spectroscopy, identified all the specimens as synthetic moissanite. Under the microscope, all samples except the colorless were confirmed to be a synthetic moissanite coated with a colored film. EDXRF chemical analysis detected very weak X-ray fluorescence peak characteristics of Ca, Ti, and Co in the colored samples. These features were not detected in the colorless sample. Raman spectroscopy investigation was unable to detect the 1332 cm^-1 (produced by sp³ bonding of carbon atoms) or the ~1550 cm^-1 (produced by graphite-related sp² bonding) peak in the colorless sample. The SEM image of the colorless sample showed no indication of a coating. The TEM image of the colorless sample revealed the presence of a 3~8 nm thick layer on the moissanite. Moreover, from the corresponding STEM Z-contrast image combined with the energy-dispersive X-ray spectroscopy (EDX) line profiles and EDX elemental maps, this layer was estimated to be carbon, silicon and oxygen.

• The Bulletin of The Korean Astronomical Society
• /
• v.46 no.2
• /
• pp.77.1-77.1
• /
• 2021

한국천문연구원은 천문우주분야의 과학임무 탑재체 개발을 주도적으로 수행해오고 있다. 과학기술위성1호 주탑재체 원자외선영상분광기 FIMS 개발, 과학기술위성3호 주탑재체 다목적적외선영상시스템 MIRIS 개발, 차세대소 형위성1호 주탑재체 근적외선영상분광기 NISS 개발을 수행하였고, 현재는 NASA와 국제협력으로 SPHEREx 우주 망원경을 개발하고 있다. 이러한 개발 과정을 거치면서 주경 20cm 이하의 소형 탑재체 과학임무 한계와 더불어 연구 현장에서 더 큰 우주망원경의 수요가 제기되었고, 현재의 국가우주개발 중장기계획에도 2030년대 한국형 우주망원경을 포함하게 되었다. 이러한 일정에 발맞추어 한국천문연구원은 2030년대 한국형 우주망원경 독자 운영을 대비하기 위해서 2020년 1월부터 주요 사업으로 한국형 우주망원경 개발을 위한 기획연구를 시작하였다. 이 기획연구는 2021년 말까지 2년 동안 수행하고 있으며, 이 기획연구를 통해서 학계의 과학임무 요구사항을 종합 수렴하였고, 관련 컨설팅 업체와 협업하여 사전 기획연구 활동들을 수행하였으며, 향후 우주망원경 개발에 대한 전략을 제안하고 보고서를 마무리하는 단계에 와 있다. 이 발표에서는 이러한 기획연구의 세부 활동을 공유하고 보고하고자 한다.

• Korean Journal of Social Welfare
• /
• v.69 no.4
• /
• pp.41-65
• /
• 2017

This study aimed to examine the social transition, which is often metaphorized as the Fourth Industrial Revolution, within the context of social work practice and to explore measures to improve social work practice in such transition. Four social welfare researchers held seven discussions to predict the social changes in the near future centered on the Fourth Industrial Revolution and find the corresponding development strategies in social work practice; collective autobiography method was used to analyze the discussion. The analysis ascertained hyper connectivity, the advent and expansion of new communities, diversification and individualization, and the emergence of new criteria for the assessment of one's quality of life as the distinctive qualities of the near future. It was analyzed that humans and organic materials will be interconnected through spatial and temporal transcendence and that humans liberated from labor will seek for diverse communities while the number of atomized individual will increase simultaneously. Furthermore, the rise of new order of life accompanied by both the expansion of diversification and individualization and the ecological worldview brought forth by post materialistic trend was predicted. Meanwhile, the disengagement from macroscopic context, a biased inclination towards technique orientated professionalism, and individualistic social work practices without integrity were identified as the limitations of the current social work practice. This study presented three goals for social work practice to help it overcome its current shortcomings and correspond to the social changes: first, the rearrangement of practice knowledge, technique, and value so that it is based on humans and society, which are the essence of social practice work; second, the practice, such as sharing economy, that expands the individuals' boundaries of life to the community; three, the restoration of the desirability of professional social works by examining its special nature.

• Journal of agriculture & life science
• /
• v.50 no.4
• /
• pp.45-57
• /
• 2016

The average income of forestry household was only 54.3% of urban workers's and 67.6% of farms household's income based on the data from statistics Korea in 2012. This indicates that forestry, which is a labor-intensive primary industry, has the limitation for creating added value. On the other hand, the demands for forest healing and forest experiential program have been continuously increased with new lifestyle focusing on the quality of life and increased leisure time. Therefore, it is necessary to establish comprehensive policies to increase added value except forestry to respond forest demands. The project utilizing forest healing can be on of solutions to meet forest demands. Thus, this research intends to investigate an economic revitalization plan for mountain villages with forest healing. The characteristics of forest healing facilities and contents of forest healing programs were examined through internet searching, fields surveys, and expert interviews. Total 186 concepts, 8 categories, and 24 subcategories were derived from raw data of surveys. The application process of forest healing was also provided to encourage local economy of mountain areas. This research offers application procedure of the forest healing for regional economic vitalization in Mountain Villages interviews using grounded theory by Strauss and Corbin(1988) as well as NVio11. This research contributes to prepare the base of future quantitative studies by providing strategies and suggestions for the application plans of forest healing programs. In addition, this research offers basic data for the policies to establish and manage forest healing villages.

• Analytical Science and Technology
• /
• v.19 no.4
• /
• pp.342-351
• /
• 2006

This study was carried out to estimate the contents of heavy metals in big marine 17 kinds of fishes (n=89) which had been sold at wholesale market in Seoul from January to December in 2005. The contents of mercury (Hg), lead (Pb), cadmium (Cd), chrome (Cr), copper (Cu) and arsenic (As) were measured by the mercury analyzer and atomic spectrophotometer (AAS) in the flesh, liver, and gill part. The values of heavy metals in fishes were as follows ($Mean{\pm}SD$, mg/kg). The average contents of heavy metals in the fishes were Hg $0.08{\pm}0.01mg/kg$, Pb $0.17{\pm}0.32mg/kg$, Cd $0.34{\pm}0.07mg/kg$, Cr $0.05{\pm}0.05mg/kg$, Cu $1.14{\pm}0.13mg/kg$, As $0.24{\pm}0.22mg/kg$. Of the heavy metals detected in 3 parts, liver was measured highly in the all heavy metals. Of the heavy metals detected in countries, Hg, Pb, and Cu were measured highly in New Zealand, Cd and As in Norway, Cr in Korea. The range of heavy metal contents in imported and domestic fishes are low level, except of mercury contents of imported Yellow porgy (n=2), compared with regulation value of anther nations and Korea. And the contents of heavy metal in the imported fishes are natural. By correlation coefficients between fish livers of all subjects, a significant correlation was found Hg (r=0.989, p<0.01), Pb (r=0.978, p<0.01), Cd (r=0.991, p<0.01), Cu (r=0.998, p<0.01), As (r=0.198, p<0.05) in fish livers and flesh.

• Analytical Science and Technology
• /
• v.21 no.4
• /
• pp.272-278
• /
• 2008

Methods to separate 14 rare earth elements (REEs) and yttrium by the $AG^{(R)}$ 50W-X8 cation exchange resin, and to determine REEs by inductively coupled plasma atomic emission spectrophotometry (ICP-AES) were described. Ion exchange capacities of REEs on the resin were so high that the REEs were quantitatively ion exchanged under the flow rate of 0.3~1.0 mL/min at pH 1~6. The breakthrough capacity curve of the REEs showed that ion exchange capacities of light REEs (Cerium group) were greater than that of the heavy REEs (Yttrium group). When $200{\mu}g$ of each REEs was ion exchanged on 100 mg of resin, most of the heavy REEs were quantitatively desorbed with 10 mL of 2.0 M of $HNO_3$, while most of the light REEs with 30 mL. The method was applied to the monazite sample. The REEs could be separated from matrix, since ion exchange capacities of matrix ions of Ca, Ti, Mg, Mn were much lower than that of the REEs. However the relative standard deviations of the analytical results by the present method were not improved, as high as 1~5%.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.33 no.2
• /
• pp.45-53
• /
• 2023

The growth of Si on 4H-SiC substrate has a wide range of applications as a very useful material in power semiconductors, bipolar junction transistors and optoelectronics. However, it is considerably difficult to grow very fine crystalline Si on 4H-SiC owing to the lattice mismatch of approximately 20 % between Si and 4H-SiC. In this paper, we report the growth of a Si epilayer by an Al-related nanostructure cluster grown on a 4H-SiC substrate using a mixed-source hydride vapor phase epitaxy (HVPE) method. In order to grow hexagonal Si on the 4H-SIC substrate, we observed the process in which an Al-related nanostructure cluster was first formed and an epitaxial layer was formed by absorbing Si atoms. From the FE-SEM and Raman spectrum results of the Al-related nanostructure cluster and the hexagonal Si epitaxial layer, it was considered that the hexagonal Si epitaxial layer had different characteristics from the general cubic Si structure.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.12 no.1
• /
• pp.75-85
• /
• 2010

The focus of this study is to evaluate the field applicability of the newly developed inorganic thixotropic-grout in various ways. In order to do this, the volume stability and the permeability of the inorganic thixotropic-grout have been measured and compared to the existing silica type grouts. In addition, the filling capability of the grout into the tail void has been evaluated through both an experiment with a miniature tail-void filling equipment and a test filling at the shield TBM construction site. The volume loss of the inorganic thixotropic-grout after a 14 day-curing under the atmosphere condition was appeared to be minimal. The excellent waterproofing ability of the inorganic thixotropic-grout was confirmed through a permeability test. The toxicity of the inorganic thixotropic-grout has been evaluated through a toxicity test of aquatic fishes (KS M 0111) and the pH value of the liquid eluviated from inorganic thixotropic-grout was measured as an average of 8.0 and a fatality rate of goldfish after 96 hours was 10% or so. The existence of harmful heavy metals in the liquid eluviated from the inorganic thixotropic-grout has been also examined through an atomic absorption spectroscopy (AAS) test. Any of harmful heavy metals were not detected and the detected level of $Cr^{6+}$ and Cd was far below the standard. Based on both an experiment with a miniature tail-void filling equipment and a test filling at the shield TBM construction site, the filling ability of inorganic thixotropic-grout into the tail void was proved to be excellent.