• 한국전산유체공학회:학술대회논문집
• /
• 2007.10a
• /
• pp.171-176
• /
• 2007

Supersonic viscous flow over a 5 degree half angle cone studied computationally with three-dimensional Navier-Stokes equations. Steady asymmetric solutions of 5-deg half angle cone show that the asymmetric flow separation is caused by convective instability. The angle of attack, Reynolds number, and Mach number affected the side force variation that is caused by asymmetric vortical flow.

• Journal of ILASS-Korea
• /
• v.22 no.3
• /
• pp.116-121
• /
• 2017

Pre-combustion chamber type indirect diesel engines have different combustion characteristics compared with those of common rail direct injection engine. The CONVERGE, specific engine CFD program, was used to simulate hollow cone spray model and combustion. The air-fuel mixture flow propagating from pre-combustion chamber to cylinder was concentrated at top half and center of the pre-combustion chamber throat. Stronger mixture flow was formed at smaller and longer throat cases. As a result, thermal efficiency and fuel consumption were improved for modified throat shape and the soot emission was also reduced.

• Design & Manufacturing
• /
• v.10 no.3
• /
• pp.25-29
• /
• 2016

Recently, a hyaluronic acid micro needle patch for therapeutic and cosmetic purposes has been used by attaching directly to the skin with a pattern having a micro needle shape of 1/3 thickness of hair. These products are attracting attention as an innovative product that maximizes the effect by activating the active ingredient in the skin in the deep skin without blocking the horny layer because the micro needle shape exists on the patch surface so that it can penetrate effectively to the skin. Currently, DAB (droplet air blowing) or MEMS technology is used to make pattern shapes for patches. Because of this technology, manufacturing time is long and manufacturing cost is high, so we tried to develop the mold technology to machine the microneedle shape directly to the metal. In this study, we first fabricated a needle pattern with a quadrangular pyramid shape and finally produced a conical needle pattern.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1887-1888
• /
• 2008

본 논문에서는 퍼지 추론 기반의 다항식 RBF 뉴럴네트워크(Polynomial Radial Basis Function Neural Network; pRBFNN)를 설계하고 PSO(Particle Swarm Optimization) 알고리즘을 이용하여 모델의 파라미터를 동정한다. 제안된 모델은 "IF-THEN" 형식으로 기술되는 퍼지 규칙에 의해 조건부, 결론부, 추론부의 기능적 모듈로 표현된다. 조건부의 입력공간 분할에는 HCM 클러스터링에 기반을 두어 구조가 결정되며, 기존에 주로 사용된 가우시안 함수를 RBF로 이용하고, 원뿔형태의 선형 함수를 제안한다. 또한 입력공간 분할시 데이터 집합의 특성을 반영하기 위해 분포상수를 각 입력마다 고려하여 설계함으로서 공간 분할의 정밀성을 높인다. 결론부에서는 기존 상수항의 연결가중치를 다항식 형태로 표현하는 pRBFNN을 제안한다. 제안한 모델의 성능을 평가하기 위해 Box와 Jenkins가 사용한 가스로 시계열 데이터를 적용하고, 기존 모델과의 근사화와 일반화 능력에 대하여 토의한다.

• Journal of computational fluids engineering
• /
• v.11 no.1 s.32
• /
• pp.1-7
• /
• 2006

Numerical investigation of a centrifugal compressor volute having a modified straight conical duct hill been made. Three-dimensional Reynolds-Averaged Navier-Stokes equations with $k-{\varepsilon}$ turbulence equation are solved To avoid coordinate singularity at the central axis of the duct, multi-block H-type grid is generated on the circular cross-sections of the volute and stretched toward the solid wall boundary. We obtained numerical results with three different mass flow rates at the volute inlet, namely, with the inlet conditions that give small, medium and large mass flow rates at the outlet of the conical duct. Agreement with the experimental results is observed.

• East Asian mathematical journal
• /
• v.36 no.4
• /
• pp.455-474
• /
• 2020

In this study, we investigate the latus rectum, one of the geometric measures of the conics, as one of the ways in which learners harmonize the geometric and algebraic approaches to conics from a pedagogical point of view. We also introduce the conical curve of Biot as presented in 'The Discourse on the Latus Rectum in conics(2013)' by Takeshi Sugimoto and reinterpret it for visualization and use as teaching material. Therefore, we expect that the importance of mathematical concepts will be recognized in conics and students can experience geometry learning that is explored in the school field and have a positive effect in developing the power to apply even in the context of applied problems.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2010.05a
• /
• pp.27.1-27.1
• /
• 2010

본 연구에서는 박막형 태양전지의 효율 향상을 위한 한 가지 방법으로써 박막 태양전지의 기판으로 사용되는 유리 표면위에 반사방지 기능을 갖는 미세 구조물을 형성하였다. 형성된 미세구조물은 가시광선 영역의 빛의 파장보다 작고 원뿔형 구조를 가지고 있어서 빛의 점진적인 굴절률 변화를 야기하며, 이러한 구조적 굴절률 변화에 의한 반사억제 효과를 확인 할 수 있었다. 이러한 반사방지효과는 곧 태양전지의 효율 향상으로 나타났다. 미세구조물 형성을 위한 방법으로는 나노임프린트 리소그래피 기술과 니켈 재질의 금속 몰드를 사용하였으며, 반사방지구조를 형성하기 위해서 열경화 방식의 임프린트 레진이 사용되었다.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.180-183
• /
• 2004

Superplastic formability depends on flow parameters such as temperature, strain rate, strain and stress, microstructures. Usually, superplastic properties of materials are characterized with using a uni-axial tension testing. However, superplastic sheet is formed under mutiaxial loading condition in most forming practices. In the present study, superplastic characteristics of A15083 alloys were determined with using both a uni-axial and biaxial bulging tests. Specially, cone-type die was used to achieve constant strain rate under constant pressure condition. Even though constant strain rate under a certain pressure was achieved only approximately, a cone-type bulging test was found to be quite beneficial to get a multiaxial formability of superplastic materials.

• Proceedings of the KIEE Conference
• /
• 2000.11c
• /
• pp.581-582
• /
• 2000

본 논문에서는 적외선과 같이 주파수가 Tera Hz 영역인 극초고주파에서 사용할 수 있는 Horn형 안테나의 제조를 위한 독창적인 방법을 제시하고 실험적인 검증을 하였다. 파장이 $10{\mu}m$ 부근인 전자기파에 대응될 수 있는 안테나의 구조에 대한 시뮬레이션을 하였으며 이를 기준으로 안테나 어레이를 제조하기 위한 기초실험을 하였다. 기존에 사용되던 LIGA-like 공정과는 대조적으로 Columnar illumination 방법을 사용하였으며 $300{\mu}m$ 두께의 SU-8에 대하여 수직벽을 제조할 수 있었고 기판 위치에 일정한 각도를 줌으로서 경사면을 갖는 구조를 제조하였으며 기판을 회전시킴으로서 원뿔형의 Horn형 안테나 어레이를 제조할 수 있는 방안을 제시하였다.

• East Asian mathematical journal
• /
• v.28 no.4
• /
• pp.453-474
• /
• 2012

The conic sections is an important topic in the current high school geometry. It has been recognized by many researchers that high school students often have difficulty or misconception in the learning of the conic sections because they are taught the conic sections only with algebraic perspective or analytic geometry perspective. In this research, we suggest a way of teaching the conic sections using a dynamic geometry software based on some mathematics teaching and learning theories such as Freudenthal's and Dienes'. Students have various experience of constructing and manipulating the conic sections for themselves and the experience of deriving the equations of the quadratic curves under the teacher's careful guidance. We identified this approach was a feasible way to improve the teaching and learning methods of the conic sections.