NUMERICAL SIMULATION ON A VOLUTE OF STRAIGHT CONICAL DUCT TYPE BY MULTI-BLOCK GRID

다중 블록 격자를 이용한 원뿔 직관 모양의 벌류트 유동의 수치해석

  • 배황 (한국과학기술원 항공우주공학과) ;
  • 강현구 (한국과학기술원 항공우주공학과) ;
  • 윤주식 ((주식회사)뉴로스) ;
  • 박기철 ((주식회사)뉴로스) ;
  • 장근식 (한국과학기술원 항공우주공학과)
  • Published : 2006.03.01

Abstract

Numerical investigation of a centrifugal compressor volute having a modified straight conical duct hill been made. Three-dimensional Reynolds-Averaged Navier-Stokes equations with $k-{\varepsilon}$ turbulence equation are solved To avoid coordinate singularity at the central axis of the duct, multi-block H-type grid is generated on the circular cross-sections of the volute and stretched toward the solid wall boundary. We obtained numerical results with three different mass flow rates at the volute inlet, namely, with the inlet conditions that give small, medium and large mass flow rates at the outlet of the conical duct. Agreement with the experimental results is observed.

Keywords

References

  1. Sitefel, w., 1972, 'Experiences in the Development of Radial Compressors,' in: Advanced Radial compressors, van Karman Institute Lecture Series 50
  2. Mishima, H., and Gyobu, I., 1978, 'Performance Investigations of Large Capacity Centrifugal Compressors,' ASME, Paper No. 78-GT-3
  3. Sideris, M., and Van den Braembussche, R, 1986, 'Evaluation of the Flow in a Vaneless Diffuser Followed by a Volute,' Proc. of 3rd lnt. Conf. On Turbocharging and Turbochargers, London. lME Conf Public. 1986-4, p.15-20
  4. Sideris, M., and Van den Braembussche, R., 1987, 'Influence of a Circumferential Exit Pressure Distortion on the Flow in an Impeller and Diffuser,' ASME Journa of Turbomachinery, Vol.109, No.1, p.48-54 https://doi.org/10.1115/1.3262069
  5. Escudier, M., 1979 'Estimation of Pressure Loss in Ring-type Exit Chambers,' ASME Journal of fluids Engineering, Vol.101, p.511-516 https://doi.org/10.1115/1.3449020
  6. Van den Braembussche, R.A, and Rande, B.M., 1990, 'Experimental and Theoretical Study of the Swirling Flow in Centrifugal Compressor Volutes,' ASME Journal of Turbomachinery, Vol.112, p.38-43 https://doi.org/10.1115/1.2927418
  7. Bae, H., Yoon, J.S., Park, K.C., and Chang, K.S., 2006, '원심 압축기 벌류트 3차원 유동의 수치해석', 대한기계학회논문집 B권 제30권,제3호, p.222-229 https://doi.org/10.3795/KSME-B.2006.30.3.222
  8. Ayder, E., and Van den Braembussche, R.A., 1994, 'Numerical Analysis of the Three-Dimensional Swirling flow in Centrifugal Compressor Volutes,' ASME Journal of Turbomachinery, Vol.116, p.462-468 https://doi.org/10.1115/1.2929435
  9. Ragelstein, D., Hillewaert, K., Van den Braembussche, R.A, Engeda, A., Keiper, R., and Rautenberg, M., 2000, 'Experimental and Numerical Investigation of the Flow in a Centrifugal Compressor Volute,' ASME Journal of Turbomachinery. Vol.122, p.22-31 https://doi.org/10.1115/1.555423