• Current Research on Agriculture and Life Sciences
• /
• v.8
• /
• pp.107-113
• /
• 1990

This study was attempted to develop a remote controllable speed sprayer in order to protect an operator from agricultural chemicals. For the purpose of remote controllable transmission was developed by using one chip microcomputer. The following results could be summarized in this study. 1. Remote controllable transmission developed had not made even a single mistake during the test performed 100 times repeat. Thus, it could that this machine was very accurate. 2. One chip microcomputer was made by machine language and its was with in 3 sec's which was the same as human did. 3. One chip microcomputer which was used in the experiment could be widely used to automation of agricultural machinery, since it is smaller and chiper than any other similar ones such as personal computer, lap tap, one board computer. 4. Since, farm tractor has the same type of transmission as this system, it also could be adapted to farm tractors. 5. In this experiment, transmission lever was remote controll were designed to operate simultaneously. Thus, this system developed was more complicate than conventional system. However, by removing this transmission lever and by mounting the remote controll system at the speed sprayer, it would be higher and easier to handle than the conventional one.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2021.11a
• /
• pp.172-173
• /
• 2021

자율운항선박의 원격제어에서 제어지연이 발생하면 선박은 충돌위험에 처하게 됨으로 이에 대한 해결방안 필요하다. 연구 목적은 자율운항선박의 원격제어에서 제어지연이 선박충돌에 미치는 영향을 조사하기 위함이다. 연구 방법은, 선박의 터닝서클을 시뮬레이션을 통해서 관측하고, 이 데이터를 이용하여 제어지연에 의한 영향을 분석하였다. 이를 위하여 제어지연(시간)에 따른 선박조종 시뮬레이션의 선회권 측정 데이터를 이용하였다. 연구 결과, 제어지연에 의해서 본선 도메인 침공당하는 방위와 최소거리 분석 가능함을 알았다.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.23 no.1
• /
• pp.30-40
• /
• 2015

Recently, the need of RPA(Remotely Piloted Aircraft) pilots is increasing rapidly with many requirements in order to be a beginner RPA pilot, including basic flight training, instrument flight qualification training, and aircraft type switching training. When RPA pilot gets disqualified, there will be generated much waste of efforts and expenses of trainees those pilots who are disqualified. Therefore, the methodology of pre-verifying those pilots who are not proper as RPA pilots through various scientific methods will save time and expenses with pre-reducing the pilots who will get disqualified later on. The methodology of aptitude test of RPA pilots is laid out as a consideration of pre-study of RPA pilots work analysis, and select types of aptitude test. A suitability of aptitude test is verified. In order to diagnose the flight aptitude precisely, it requires to be developed. Flight aptitude test tools might be connected with training program which could foster piloting aptitude with pre-diagnosing RPA pilot trainee selecting process. For that reason, we made an experiment in order to verify credibility and suitability of these selected programs with developing RPA pilot aptitude test tools. And also, we analyzed relationships among characteristics, analysis of data, and variables to verify the efficiency of data from prior experiment. Through this thesis, we expect to raise efficiency of flight training by providing pre-flight aptitude test information of RPA pilots.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.933-940
• /
• 2022

In this paper, the algorithm was developed to recognize hand 3D position through 2D image sensor and implemented a system to remotely control the 6 d.o.f. robot arm by using it. The system consists of a camera that acquires hand position in 2D, a computer that controls robot arm that performs movement by hand position recognition. The image sensor recognizes the specific color of the glove putting on operator's hand and outputs the recognized range and position by including the color area of the glove as a shape of rectangle. We recognize the velocity vector of end effector and control the robot arm by the output data of the position and size of the detected rectangle. Through the several experiments using developed 6 axis robot, it was confirmed that the 6 d.o.f. robot arm remote control was successfully performed.

• Nuclear industry
• /
• v.13 no.1 s.119
• /
• pp.33-43
• /
• 1993

• The Bulletin of The Korean Astronomical Society
• /
• v.18
• /
• pp.3.1-3.1
• /
• 1993

• Proceedings of the Korean Nuclear Society Conference
• /
• 2004.05a
• /
• pp.268.2-268.2
• /
• 2004

• Proceedings of the Korean Nuclear Society Conference
• /
• 2002.05a
• /
• pp.271.2-271
• /
• 2002

• Journal of Korea Fishing Vessel Association
• /
• v.46
• /
• pp.27-34
• /
• 1991

• Proceedings of the KSRS Conference
• /
• 2009.03a
• /
• pp.305-308
• /
• 2009

최근 카메라와 같은 센서가 장착된 UAV(Unmanned Aerial Vehicle, 무인항공기)를 이용하는 분야는 방재, 농업, 군사 분야 등 매우 다양해지고 있다. 그러나 고품질의 영상데이터를 취득하기 위해서는 가벼우면서도 우수한 성능을 지닌 고가의 MEMS 센서 그리고 센서가 안정적으로 데이터를 획득할 수 있도록 안정적인 비행이 가능한 대형 UAV플랫폼으로 구성된 시스템이 필요하기 때문에 시스템 구축비용이 클 수밖에 없다. 본 연구에서는 저비용으로 영상 데이터를 취득할 수 있는 UAV시스템을 구축하여 취득된 영상데이터의 처리를 통해 얻어지는 영상의 품질을 살펴보고 그 효용성을 시험해보았다. 이를 위해서 고가인 UAV를 대신해 비교적 가격이 저렴한 R/C헬기(Remote Control, 원격조종 헬기)를 플랫폼으로 선정하고, 영상데이터를 수집하는 카메라센서를 탑재하였다. 그리고 탑재된 센서가 안정적으로 데이터를 취득할 수 있도록, 센서와 플랫폼 사이에 Gimbal을 장착하였다. 이렇게 구축된 시스템을 이용하여 시험비행을 해보았으며, 그 결과 플랫폼에 탑재된 센서로부터 비교적 안정적이고 양질의 이미지를 획득할 수 있었다. 본 연구에서 구축한 R/C 헬리콥터 시스템을 통하여 저비용/고효율의 영상데이터를 취득할 수 있음을 확인하였다. 구축된 시스템은 근접한 거리에서 대상물의 영상을 취득하기 때문에 고품질의 3차원 모델데이터 생성에 매우 도움이 될 것으로 생각한다.