• Journal of the Korean association of regional geographers
• /
• v.7 no.1
• /
• pp.35-50
• /
• 2001

Since remotely sensed images of coastal wetlands are very sensitive to spatial resolution, it is very important to select an optimum resolution for particular geographic phenomena needed to be represented. Scale is one of the most important factors in spatial analysis techniques, which is defined as a spatial and temporal interval for a measurement or observation and is determined by the spatial extent of study area or the measurement unit. In order to acquire the optimum scale for a particular subject (i.e., coastal wetlands), measuring and representing the characteristics of attribute information extracted from the remotely sensed images are required. This study aims to explore and analyze the scale effects of attribute information extracted from remotely sensed coastal wetlands images. Specifically, it is focused on identifying the effects of scale in response to spatial resolution changes and suggesting a methodology for exploring the optimum spatial resolution. The LANDSAT TM image of Sunchon Bay was classified by a supervised classification method, Six land cover types were classified and the Kappa index for this classification was 84.6%. In order to explore the effects of scale in the classification procedure, a set of images that have different spatial resolutions were created by a aggregation method. Coarser images were created with the original image by averaging the DN values of neighboring pixels. Sixteen images whose resolution range from 30 m to 480 m were generated and classified to obtain land cover information using the same training set applied to the initial classification. The values of Kappa index show a distinctive pattern according to the spatial resolution change. Up to 120m, the values of Kappa index changed little, but Kappa index decreased dramatically at the 150m. However, at the resolution of 240 m and 270m, the classification accuracy was increased. From this observation, the optimum resolution for the study area would be either at 240m or 270m with respect to the classification accuracy and the best quality of attribute information can be obtained from these resolutions. Procedures and methodologies developed from this study would be applied to similar kinds and be used as a methodology of identifying and defining an optimum spatial resolution for a given problem.

• Journal of Digital Convergence
• /
• v.18 no.3
• /
• pp.163-169
• /
• 2020

A smart key has been used in a variety of embedded environments and there also have been attacks from a remote place by amplifying signals at a location of a user. Existing studies on defence techniques suggest multiple sensors and hash functions to improve authentication speed; these, however, increase the electricity usage and the probability of type 1 error. For these reasons, I suggest an embedded security controller based on client authentication and user movement information improving the authentication method between a controller and a host device. I applied encryption algorithm to the suggested model for communication using an Arduino board, GPS, and Bluetooth and performed authentication through path analysis utilizing user movement information for the authentication. I found that the change in usability was nonsignificant when performing actions using the suggested model by evaluating the time to encode and decode. The embedded security controller in the model can be applied to the system of a remote controller for a two-wheeled vehicle or a mobile and stationary host device; in the process of studying, I found that encryption and decryption could take less then 100ms. The later study may deal with protocols to speed up the data communication including encryption and decryption and the path data management.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.22 no.2
• /
• pp.65-81
• /
• 2019

This study analyzed the relationship of land cover type, urban temperature in Gimhae city, Gyeongsangnam-do, South Korea. Date were used for land cover map, MODIS LST, and detailed temperature data on the Korean Peninsula based on RCP between 2000 and 2010. The correlation between urban area and surface temperature was 0.417, 0.512 for agricultural area and -0.607 for forest area. The correlation between surface temperature and air temperature was 0.301. The relationship with air temperature was analyzed as 0.275 for urban area, agriculture area 0.226, forest area 0.350. Urban and agricultural areas showed increased surface and air temperature as the area increased, while forest areas showed opposite improvements. In structural equation models, urban and agricultural areas had direct effects on the rise of surface temperature, whle forest areas had direct effects on the reduction of air temperature. In the future, it is necessary to use measured temperature data near the surface to understand the relationship between surface temperature and temperature according to the changes in spatial characteristics, which will prepare measures for urban heat island mitigation at the level of urban and environmental planning.

• Korean Journal of Remote Sensing
• /
• v.36 no.6_2
• /
• pp.1509-1521
• /
• 2020

Experiments for validation of surface reflectance produced by Korea Multi-Purpose Satellite (KOMPSAT-3A) were conducted using Chinese Baotou (BTCN) data among four sites of the Radical Calibration Network (RadCalNet), a portal that provides spectrophotometric reflectance measurements. The atmosphere reflectance and surface reflectance products were generated using an extension program of an open-source Orfeo ToolBox (OTB), which was redesigned and implemented to extract those reflectance products in batches. Three image data sets of 2016, 2017, and 2018 were taken into account of the two sensor model variability, ver. 1.4 released in 2017 and ver. 1.5 in 2019, such as gain and offset applied to the absolute atmospheric correction. The results of applying these sensor model variables showed that the reflectance products by ver. 1.4 were relatively well-matched with RadCalNet BTCN data, compared to ones by ver. 1.5. On the other hand, the reflectance products obtained from the Landsat-8 by the USGS LaSRC algorithm and Sentinel-2B images using the SNAP Sen2Cor program were used to quantitatively verify the differences in those of KOMPSAT-3A. Based on the RadCalNet BTCN data, the differences between the surface reflectance of KOMPSAT-3A image were shown to be highly consistent with B band as -0.031 to 0.034, G band as -0.001 to 0.055, R band as -0.072 to 0.037, and NIR band as -0.060 to 0.022. The surface reflectance of KOMPSAT-3A also indicated the accuracy level for further applications, compared to those of Landsat-8 and Sentinel-2B images. The results of this study are meaningful in confirming the applicability of Analysis Ready Data (ARD) to the surface reflectance on high-resolution satellites.

• Korean Journal of Remote Sensing
• /
• v.33 no.5_1
• /
• pp.571-585
• /
• 2017

The number of spaceborne optical sensors including red-edge band has been increasing since red-edge band is known to be effective to enhance the information content on biophysical characteristics of vegetation. Considering that the Agriculture and Forestry Satellite is planning to carry an imaging sensor having red-edge band, we tried to analyze the current status and potential of red-edge band. As a case study, we analyzed the effect of using red-edge band and tried to find the optimum band width and wavelength region of the red-edge band to estimate leaf area index (LAI) of very dense tree canopy. Field spectral measurements were conducted from April to October over two tree species (white oak and pitch pine) having high LAI. Using the spectral measurement data, total 355 red-edge bands reflectance were simulated by varying five band width (10 nm, 20 nm, 30 nm, 40 nm, 50 nm) and 71 central wavelength. Two red-edge based spectral indices(NDRE, CIRE) were derived using the simulated red-edge band and compared with the LAI of two tree species. Both NDRE and CIRE showed higher correlation coefficients with the LAI than NDVI. This would be an alternative to overcome the limitation of the NDVI saturation problem that NDVI has not been effective to estimate LAI over very dense canopy situation. There was no significant difference among five band widths of red-edge band in relation to LAI. The highest correlation coefficients were obtained at the red-edge band of center wavelength near the 720 nm for the white oak and 710 nm for the pitch pine. To select the optimum band width and wavelength region of the red-edge band, further studies are necessary to examine the relationship with other biophysical variables, such as chlorophyll, nitrogen, water content, and biomass.

• Korean Journal of Remote Sensing
• /
• v.37 no.2
• /
• pp.245-256
• /
• 2021

This study was conducted to identify the applicability of a LiDAR sensor to forest resources inventories by comparing data on a tree's position, height, and DBH obtained by the sensor with those by existing forest inventory methods, for the tree species of Criptomeria japonica in Jeolmul forest in Jeju, South Korea. To this end, a backpack personal LiDAR (Greenvalley International, Model D50) was employed. To facilitate the process of the data collection, patterns of collecting the data by the sensor were divided into seven ones, considering the density of sample plots and the work efficiency. Then, the accuracy of estimating the variables of each tree was assessed. The amount of time spent on acquiring and processing the data by each method was compared to evaluate the efficiency. The findings showed that the rate of detecting standing trees by the LiDAR was 100%. Also, the high statistical accuracy was observed in both Pattern 5 (DBH: RMSE 1.07 cm, Bias -0.79 cm, Height: RMSE 0.95 m, Bias -3.2 m), and Pattern 7 (DBH: RMSE 1.18 cm, Bias -0.82 cm, Height: RMSE 1.13 m, Bias -2.62 m), compared to the results drawn in the typical inventory manner. Concerning the time issue, 115 to 135 minutes per 1ha were taken to process the data by utilizing the LiDAR, while 375 to 1,115 spent in the existing way, proving the higher efficiency of the device. It can thus be concluded that using a backpack personal LiDAR helps increase efficiency in conducting a forest resources inventory in an planted coniferous forest with understory vegetation, implying a need for further research in a variety of forests.

• The KIPS Transactions:PartA
• /
• v.10A no.6
• /
• pp.715-722
• /
• 2003

Monitoring is used to see if a real-time system provides a service on time. The target of monitoring is not only an interior system but also a remote system which is located in the remote network. Monitoring needs data store to monitor data from each system. But a data store should be designed on the considerations of time constraints and data accessibility. In this paper, we present an architecture of XML-based data store and network delivery. XML-based data store is based on XML which is a standardized data format. So any platform which supports TCP/IP and HTTP can access data in the data store without any conversion. The XML-based delivery architecture is designed to reduce the time of data access and delivery. In addition, some experiments were tested to provide the timing guideline to be kept by a real-time system which uses the architecture presented in this paper. The architecture of XML-based data store and delivery designed in this paper can be used in the domains of remote real-time monitoring and control.

• Journal of KIISE:Computer Systems and Theory
• /
• v.26 no.8
• /
• pp.975-983
• /
• 1999

최근 네트워크의 속도가 빨라지고 멀티미디어 데이터를 다루기 위한 기술들이 개발됨에 따라 많은 멀티미디어 응용 프로그램들이 인터넷에 등장하고 있다. 그러나 이들 응용프로그램들은 수신자에게 전송되는 영상.음성의 품질이 낮기 때문에 기대만큼 빠르게 확산되지 못하고 있다. 영상.음성의 품질이 낮은 이유는 현재 인터넷이 실시간 응용프로그램이 요구하는 만큼 빠르고 신뢰성 있게 데이터를 전송할 수 없기 때문이다. 현재 인터넷의 내부구조를 바꾸지 않고 품질을 높이기 위해 많은 연구들이 진행되고 있는데 그 중 하나는 동적으로 변화하는 인터넷의 상태에 맞게 멀티캐스트 트래픽의 전송율을 조절하는 종단간의 흐름제어이다. 본 논문은 기존의 흐름제어 기법인 IVS와 RLM의 성능을 개선시키기 위한 두 가지 흐름제어 기법을 소개한다. IVS는 송신자가 주기적으로 측정된 네트워크 상태에 따라 전송율을 일정하게 조절한다. 송신자가 하나의 데이타 스트림을 생성하는 IVS와는 달리 RLM에서는 송신자가 계층적 코딩에 의하여 생성된 여러개의 데이타 스트림을 전송하고 각 수신자는 자신의 네트워크 상태에 맞게 데이타 스트림을 선택하는 기법이다. 그러나 IVS는 송신자가 전송율을 일정하게 증가시키고, RLM은 각자의 네트워크 상태를 고려하지 않고 임의의 시간에 하나 이상의 데이타 스트림을 받기 때문에 성능을 저하시킬 수 있다. 본 논문에서는 TCP-like IVS와 Adaptive RLM이라는 두 가지 새로운 기법을 소개한다. TCP-like IVS는 송신자가 전송율을 동적으로 결정하고, Adaptive RLM은 하나 이상의 데이타 스트림을 받기 위해 적당한 시간을 선택할 수 있다. 본 논문에서는 시뮬레이션을 통해 여러 가지 네트워크 구조에서 두 가지 방식이 기존의 방식에 비하여 더욱 높은 대역폭 이용율과 10~20% 정도 적은 패킷손실율을 이룬다는 것을 보여준다.Abstract Nowadays, many multimedia applications for the Internet are introduced as the network gets faster and many techniques manipulating multimedia data are developed. These multimedia applications, however, do not spread widely and are not fast as expected at their introduction time due to the poor quality of image and voice delivered at receivers. The poor quality is mainly attributed to that the current Internet can not carry data as fast and reliably as the real-time applications require. To improve the quality without modifying the internal structure of the current Internet, many researches are conducted. One of them is an end-to-end flow control of multicast traffic adapting the sending rate to the dynamically varying Internet state. This paper proposes two flow-control techniques which can improve the performance of the two conventional techniques; IVS and RLM. IVS statically adjusts the sending rate based on the network state periodically estimated. Differently from IVS in which a sender produces one single data stream, in RLM a sender transmits several data streams generated by the layered coding scheme and each receiver selects some data streams based on its own network state. The more data streams a receiver receives, the better quality of image or voice the receiver can produce. The two techniques, however, can degrade the performance since IVS increases its sending rate statically and RLM accepts one more data stream at arbitrary time regardless of the network state respectively. We introduce two new techniques called TCP-like IVS and Adaptive RLM; TCP-like IVS can determine the sending rate dynamically and Adaptive RLM can select the right time to add one more data stream. Our simulation experiments show that two techniques can achieve better utilization and less packet loss by 10-20% over various network topologies.

• The KIPS Transactions:PartA
• /
• v.12A no.7 s.97
• /
• pp.627-636
• /
• 2005

This paper presents a PC cluster-based distributed video on demand (VOD) server that minimizes the load of the interconnection network by adopting channel bonding-based MVIA and the interval cache algorithm Video data is distributed to the disks of each server node of the distributed VOD server and each server node receives the data through the interconnection network and sends it to clients. The load of the interconnection network increases because of the large volume of video data transferred. We adopt two techniques to reduce the load of the interconnection network. First, an Msupporting channel bonding technique is adopted for the interconnection network. n which is a user-level communication protocol that reduces the overhead of the TCP/IP protocol in cluster systems, minimizes the time spent in communicating. We increase the bandwidth of the interconnection network using the channel bonding technique with MThe channel bonding technique expands the bandwidth by sending data concurrently through multiple network cards. Second, the interval cache reduces traffic on the interconnection network by caching the video data transferred from the remote disks in main memory Experiments using the distributed VOD server of this paper showed a maximum performance improvement of $30\%$ compared with a distributed VOD server without channel bonding-based MVIA and the interval cache, when used with a four-node PC cluster.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2017.05a
• /
• pp.559-562
• /
• 2017

In city, tracing of power transmission lines is difficult due to compound installation of overhead and underground lines, transposition, bad view caused by trees or big buildings. It is hard problem for electrical technician on site to trace power transformers or power lines to serve customers in 3 phase -4 wires power distribution systems. It is necessary that the correct and fast tracing method is required for load balancing among distribution lines. Old technology use to trace off-lines with high power impulse injection. Our proposed method use to trace live lines with very small power high frequency signal injection. Typical power transformers in the distribution system prevent propagating the higher frequency carrier signal. The proposed method uses the limited propagation ability to identify the power transformer to serve customers. Two end communication terminals are required to be synchronized between them for determination on electrically same phases. Challenging issue is to achieve synchronization without GPS providing synchronizing time. A novel power transformer and wire identification system is designed and implemented. The system consists of a transmitter and a receiver with power-line communication module. Some experiments are conducted to verify the theoretical concepts in a big commercial building. Also some simulations are done to help and understand the concepts by using MATLAB Simulink simulator.