• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.05a
• /
• pp.347-348
• /
• 2023

In construction sites, small-scale construction quantities or limited work hours below the daily work volume may occur due to on-site conditions. For small-scale quantities, the input of equipment and labor is designed based on an hourly basis in the invoice, resulting in a difference from the actual cost. In this study, we aim to explore solutions from the perspective of construction cost standards to secure appropriate construction costs for small-scale and time-limited construction sites. Firstly, to preserve the basic construction costs on-site, we established standards where half the cost would be charged for construction quantities below four hours and a full day's cost would be designed for construction quantities between four to eight hours. Additionally, realistic construction cost calculation standards are expected to be provided by realizing a surcharge rate for work hour limitations to secure appropriate construction costs.

• Journal of the Korea Institute of Building Construction
• /
• v.21 no.5
• /
• pp.445-457
• /
• 2021

In previous studies, it was confirmed that through the in-situ production of precast concrete members, costs could be reduced by 14.5-39.4% compared to in-plant production. In particular, it was confirmed that the factory owner did not make a contract if it did not earn more than 20% of the production cost. If precast concrete members are produced in-situ under the same conditions, the quality equivalent to that of factory production can be secured. As it is advantageous in terms of cost and quality, precast concrete members must be produced in-situ. However, it is difficult to produce all quantities in-situ due to time and various other constraints. This is because in-situ production is avoided due to anticipated risks during the project management process. However, if the risk factors are analyzed before performing in-situ production of precast concrete members, it will increase the opportunity for in-situ production. Therefore, this study develops a checklist for evaluating the risk of in-situ production of precast concrete members. By applying the checklist to one case site, it was verified that risk factors can be evaluated easily and quickly. As a result, it was analyzed that sites with a high building coverage ratio are classified as high-risk sites because it is difficult to secure usable area for production and storage. The developed checklist efficiently evaluates the risk factors of in-site production, and makes it possible for the operator to determine the risk factors, which can change frequently during project execution, and respond according to the situation.

• Journal of Korean Society of Forest Science
• /
• v.106 no.4
• /
• pp.473-479
• /
• 2017

This study is to analyze differences in gross income between only forestry and agroforestry. In addition, cost structure and management performance on poultry farming was surveyed. The study sites were three forestry households located in Chungju, Kyungsan and Hwacheon. The method of its management performance were conducted by interview. And, survey items of the performance were operating expenses items and gross income items in 2015. As a result of study, gross income of Chungju business model was 25,608,000 won. The operating cost was 20,217,571 won so that the net income was 5,390,429 won. In case of Gyeongsan, gross income was 33,950,000 won and the operating cost was 18,655,714 won. Thus, the net income was 15,494,286 won. Hwacheon business model showed that gross income was 31,850,000 won, the operating cost was 13,143,000 won. Thus, the net income was 18,707,000 won. And, break-even point of sale volume, which meets cost, was 617 chicken in Chungju, 125 chicken in Gyeongsan, and 63 chicken in Hwacheon. In terms of selling cost-per-production ratio, Chungju business model was 79%, Kyungsan was 55% and Hwacheon was 41%. The results of this study indicates that margin ratio per chicken was 21% in Chungju, 45% in Kyungsan and 59% in Hwacheon. On Agroforestry, increasing rate for gross income was evaluated by 16% in Chungju, 18% in Gyeongsan and 11% Hwacheon.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2009.11a
• /
• pp.49.2-49.2
• /
• 2009

투명전극은 디스플레이, 태양전지와 같은 광전자 소자에 필수적이며, 지금까지 개발된 재료 중에는 ITO가 가장 투명하면서 전기전도도가 높고 생산성도 좋기 때문에 투명전극의 재료로 사용하고 있다. ITO는 낮은 비저항(${\sim}10^{-4}{\Omega}cm$) 과 높은 투과율 (~85 %), 상대적으로 넓은 밴드갭 에너지 (3.5 eV) 의특성과 같이 뛰어난 전기적 광학적 특성에 반해서 높은 원자재 가격, 불안정한 공급량 등으로 인한 문제점이꾸준히 제기되고 있다. 따라서 $In_2O_3$:Sn, ZnO:Al, ZnO:Ga, ZnO:F, ZnO:B, TiN 등과 같은 물질들로대체하려는 연구가 활발하게 진행되고 있다. ZnO는 ITO보다원자재의 수급이 원활하기 때문에 원가가 낮으며, 상대적으로 낮은 온도에서도 제작이 가능하다. 또한 화학적으로 안정적이므로 ZnO에 Al, Ga 등의 3족 원소를 도핑함으로써 낮은 비저항의 박막 제작이 가능하고, ITO 박막과 비교하여 etching이 쉬우며 기판과의 접착성이 좋으며, sputtering 공정시 plasma 분위기에서의 안정성이 뛰어나고 박막증착율이 높기 때문에 투명전극으로 적합한 재료이다. 본 연구에서는 cylindrical type의 Aldoping된 ZnO single target을 사용하여 박막 증착 압력의 변화를 주어 유리기판 위에 DC sputtering을 하였다. Fieldemission scanning electron microscope (FESEM)을 통해 ZnO:Al 박막의 표면의 형상과 두께를 확인하였으며, X-ray diffraction (XRD) 분석을 통해 박막의 결정학적 특성을 관찰하였다. 투명전극용 물질로서 ZnO:Al 박막의 적합성 여부를 확인하기 위하여 Van der Pauw 방법을 이용하여 박막의 비저항, 전자 이동도, 캐리어 농도를 측정하였으며, 박막의 기계적 성질 및 표면 접착성을 확인하기 위하여 nano-indentaion 분석을 하였다. 또한 UV-vis spectrophotometer를 이용하여 ZnO:Al 박막의 투과율을 분석하여 투명전극으로의 응용 가능성을 확인하였다.

• Proceedings of the Korean Society for Food Science of Animal Resources Conference
• /
• 2004.10a
• /
• pp.1-29
• /
• 2004

본 연구에서 저알레르기 처리 공정은 Autoclaving, 가열처리, micro wave, dry heating, 초음파, 효소, 인산염, 천연효소, 가용화, 복합처리 등의 처리 공정으로 하였다. 저 allergy처리에서 allergy가 완전히 억제되는 것은 가열처리를 한 것으로 쇄양 B(추출액+가열 3분), autoclave 처리, micro파 처리, dry heating처리, 복합처리를 했을 때이다. 또한 천연효소(키위)를 침지한 후 tolergen과 같이 3분간 가열했을 때 allergy가 억제되는 것으로 나타났다. 즉 가열처리로 인한 단백질 구조 변성으로 이러한 결과를 보인 것으로 보인다. 인산염의 경우도 어느 정도 억제가 되는 것으로 보이고 있다. 나머지 처리들은 거의 효과를 보이고 있지 않다. 천연효소와 tolergen(쇄양)을 그냥 처리했을 때에는 allergy 억제효과는 없는 것으로 나타났다. 우유의 저 allergy 처리는 효소, autoclave, micro 파, NaOH 처리, 복합처리에서 감소되는 것으로 나타났다. 이러한 결과는 western blotting으로도 확인되었으며 그 억제율 %은 식육에서는 상당한 가열처리를 통하여 알레르기를 감소시킬 수 있는 것을 볼 수 있으며 또한 인산염, 가용화(NaOH처리)도 저 알레르기 효과가 있음을 알 수 있다. 키위, 쇄양 단독 처리 시 저 알레르기 효과가 없지만 약간의 가열을 통하여 알레르기가 감소됨을 알 수 있다. 우유는 효소나 autoclave 처리만이 저 allergy 효과가 각각 28%, 45%로 적게 나타났다. 모든 복합처리의 경우에서는 그 억제율이 41-96%로 높은 효과가 있음을 알 수 있다. 천연효소처리와 인산염 처리된 식육의 전자현미경적 관찰은 control과 비교시 조직의 변화가 없고 둘다 근육 단백질 구조를 분산시키는 것으로 나타났다. 또한 고기를 단계별 복합처리로 저 allergy 처리는 단계별로 점차적으로 allergy가 감소되었다. 즉 단계별로 억제가 안되는 것부터 억제되는 처리를 복합적으로 처리한 것으로 그 단계는 천연효소처리에 인산염 처리, 여기에 초음파 처리, 마지막 단계로 3분 끓이면 억제율이 68%까지 억제되었다. 이는 단일처리시 전혀 억제를 못하는 처리를 단계별로 한 단계씩 더해가면 allergy 억제효과가 나타난다고 할 수 있겠다. 초음파 처리도 역시 저 allergy 처리 공정에 이용될 수 있는데 이것은 그 처리로 인해 새로운 알러젠이 생성될 수도 있다. 또한 복합처리로 allergy를 감소시키면 연속적이고 동시적으로 하기 때문에 원가를 절감할 수 있다.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.22 no.3
• /
• pp.127-134
• /
• 2016

In this study, Biodegradable masterbatch (M/B) was prepared by different kinds and content of biodegradable catalysts added to oxo biodegradable plastics. The bio film was prepared by adding biodegradable M/B to the polyethylene pellet, and the change of physical properties by UV and heat treatment and the stability as food packaging material were confirmed. As a result of the physical property change, Fe salt and Al salt bio film was superior to Ni salt bio film about a decrease in physical property. However, considering the raw material cost and industrial availability, M/B containing Fe salt was selected and additional experiments were conducted by concentration. The bio films prepared with Fe salt M/B 1.0, 1.5 and 2.0 wt% showed excellent physical properties.

• Korean Journal of Construction Engineering and Management
• /
• v.11 no.2
• /
• pp.64-73
• /
• 2010

The stagnation of unsold houses is recently aggravated due to domestic and overseas crisis of finance and real-sector economy and domestic housing construction is in serious difficulty. Thus, tax support is necessary for national housing construction. Due to the current tax exemption system of national housing, V.A.T. paid in the construction of national housing is not deducted. Namely, it is ascribed to consumer as it is reflected in the construction cost. This research intends to analyze the limit of V.A.T. tax exemption system, to present the necessity of applying zero rate and to calculate the scale of non-deduction of V.A.T. purchase tax amount for national housing by analyzing the construction site of apartment house of house constructor in order to analyze the effect of zero rate when it is applied on the basis of above ground. In the zero rate system, V.A.T. is not collected from the consumers like the present tax exemption system. However, the purchase tax amount borne in the construction of national housing is deducted totally. As purchase tax is deducted, constructor will promote supplying national housing thanks to the effect of solving financial difficulties and improving liquidity. Since the architecture cost and parceling-out price can be lowered due to the improved liquidity of constructor, the policy will actually help the people without house.

• Journal of the Korea Institute of Building Construction
• /
• v.14 no.4
• /
• pp.322-328
• /
• 2014

In this study, revelation performance of concrete at early age according to types of cement, water reducing ratio of high performance superplasticizer and mixing of accelerator for early hydration was examined aiming for reduction of construction period of framework through securing strength at early age of concrete. It was observed that strength at early age, 5MPa in 12hours, 14MPa in 18hours, is secured by early strength improvement type cement and using promotion admixture for early hydration which are Sodium persulfate, Potassium hydroxide. Therefore cost reduction is expected to be possible in construction site by reducing construction period of frame work.

• Journal of IKEEE
• /
• v.20 no.2
• /
• pp.184-187
• /
• 2016

In this paper, we propose the sensor and the signal duplicator for the automatic building control. Developed duplicator realizes the sensor data collection apparatus and mimics the measured data and, thus, reduces the construction cost by using logical communication layer. Furthermore, the system supports the open protocols and can be associated with HMI(Human Machine Interface) used on the market. Developed duplicator is proved to be functional within the real environment. Measurement error rate, operating temperature, and operating humidity show very good results by the certified testing apparatus and organization.

• The Journal of Fisheries Business Administration
• /
• v.42 no.3
• /
• pp.1-13
• /
• 2011

It is necessary to set up a standard of estimation for annual unit price of sale and cost, damage rate for calculating compensation against fishery damage objectively. Two items on the unit price and cost have regulations but the damage rate has not, so it may occurred some problems such as reasonability and balance because the estimation should be handling by an appraiser's knowledge and experience. This study has analyzed using Regression model and searched variable costs and fixed costs about each items appraisers to operate in the present. It is compare profit damage index is calculated by an estimated model and an appraised example. This analysis showed highly 23-30% estimated model more than appraised example. It means the overestimation for fishery damage. This difference has caused by limited data, lack of sample, much difference in the standard deviation, and has not classified each kind of business and weight of coastal fishery, the overestimation more than what expected. This study has analyzed that the applied rate of fixed and variable cost in relation to the compensation in the cost of coastal fishery is very valuable.