• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1998.11a
• /
• pp.219-223
• /
• 1998

본 논문에서는 움직임 필드를 분할하고, 이를 바탕으로 가변 보간율을 이용한 새로운 비디오 보간기법을 제시한다. 움직임 필드의 분할은 수리형태학적 필터링 및 영역별 움직임 추정을 이용하여 구성된다. 구성된 움직임 필드는 각각의 움직임 특성을 바탕으로 배경 또는 정지 영역, 움직임 영역, 드러난 영역, 가려진 영역 둥의 분류에 바탕을 둔다. 제시된 보간기법은 움직임이 복잡하거나 비선형적일 때, 보간율을 적게 하며, 움직임이 적거나 선형적일 때 보간율을 높게 함으로써 일정한 화질을 유지할 수 있도록 하였다.

• The Journal of the Korea Contents Association
• /
• v.12 no.3
• /
• pp.1-8
• /
• 2012

Video FRUC (Frame Rate Up Conversion) has been a technique of great interest due to its diversified applications in consumer electronics. Most advanced FRUC algorithms adopt a motion interpolation technique to determine the motion vector field of interpolated frames. But, in some applications, it is necessary to evaluate how well the MCI (Motion Compensated Interpolation) frame is reconstructed. For this aim, this paper proposes a distortion estimation for motion compensated interpolation frame using frame-adaptive distortion estimation. The proposed method is applied for the symmetric motion estimation and compensated scheme and then analyzed by three different approaches, that is, forward estimation, backward estimation and adaptive bi-directional estimation schemes. Through computer simulations, it is shown that the proposed bi-directional estimation method outperforms others and can be effectively applied for FRUC.

• The Journal of the Korea Contents Association
• /
• v.13 no.5
• /
• pp.28-36
• /
• 2013

Motion-compensated frame interpolation (MCFI) techniques in video signal processing have many application areas. Frame rate up-conversion (FRUC) or distributed video coding (DVC) technique needs an effective MCFI algorithm. For these applications, it is necessary to develop an effective post-processing technique to improve visual qualities or to reduce virtual channel noises, resulting in the reduced channel bit rate. This paper proposes a reliability evaluation method based on spatio-temporal characteristics for motion-compensated interpolated blocks. The proposed algorithm investigates the temporal matching characteristics for current frame and then is designed in such a way that it can measure temporal characteristics as well as the spatial ones. Through computer simulations, it is shown that the proposed method outperforms the conventional temporal matching method.

• Journal of Broadcast Engineering
• /
• v.18 no.4
• /
• pp.599-608
• /
• 2013

Motion compensated interpolation (MCI) techniques are used for increasing the frame rate and generating the side information in the distributed video coding (DVC) system. In this paper, an efficient MCI technique using the image resizing in the DCT or LiftLT domain is proposed, and the performance of the MCI technique using various sub-pixel generation techniques is analyzed. Extensive computer simulations show that the proposed method produces the superior results compared to the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.1
• /
• pp.64-70
• /
• 2011

In an H.264/AVC video encoder, the motion estimation at fractional pixel accuracy improves a coding efficiency and image quality. However, it requires additional computation overheads for fractional search and interpolation, and thus, reducing the computation complexity of fractional search becomes more important. This paper proposes a Pixel Re-composition Fractional Motion Estimation (PRFME) algorithm for an H.264/AVC video encoder. Fractional Motion Estimation performs interpolation for the overlapped pixels which increases the computational complexity. PRFME can reduce the computational complexity by eliminating the overlapped pixel interpolation. Compared with the fast full search, the proposed algorithm can reduce 18.1% of computational complexity, meanwhile, the maximum PSNR degradation is less than 0.067dB. Therefore, the proposed PRFME algorithm is quite suitable for mobile applications requiring low power and complexity.

• Journal of Broadcast Engineering
• /
• v.16 no.6
• /
• pp.1058-1068
• /
• 2011

Video FRUC (Frame Rate Up Conversion) is one of the main issues that have arisen in recent years with the explosive growth of video sources and display formats in consumer electronics. Most advanced FRUC algorithms adopt an efficient motion interpolation technique to determine the motion vector field of interpolated frames. But, in some application areas such as post processing in receiver side, it is necessary to evaluate how well the MCI (Motion Compensated Interpolation) frame was reconstructed. In order to achieve this aim, first, this paper introduces some cost functions to estimate the reliability of a block in the MCI frame. Then, by using these functions, this paper proposes two distortion estimation models for evaluating how much noise was produced in the MCI frame. Through computer simulations, it is shown that the proposed estimation methods perform effectively in estimating the noises of the MCI frame.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.7C
• /
• pp.687-696
• /
• 2009

The motion compensated interpolation method is widely used to increase video frame rates. Especially, the bilateral motion estimation technique provides the improved results, since it doesn't make the overlapping and missing blocks in the interpolated frame. However, the motion vectors, which are obtained by the bilateral motion estimation, sometimes require further correction. In this paper, we propose the efficient motion vector.correction method for the bilateral motion estimation technique. By comparing the motion vectors of neighboring blocks and searching the new motion vector after merging the neighboring blocks, the erroneous motion vectors are efficiently corrected. It is shown that the proposed method provides better results, compared with the conventional methods.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.3
• /
• pp.28-36
• /
• 2009

In this paper, we propose a frame-rate up-conversion method for temporal quality enhancement. The proposed method adaptively changes search range during hierarchical motion estimation and reconstructs hole regions using the proposed bi-direction prediction and linear interpolation. In order to alleviate errors due to inaccurate motion vector estimation, search range is adaptively changed based on reliability and for more accurate, motion estimation is performed in descending order of block variance. After segmentation of background and object regions, for filling hole regions, the pixel values of background regions are reconstructed using linear interpolation and those of object regions are compensated based on the proposed hi-directional prediction. The proposed algorithm is evaluated in terms of PSNR with original uncompressed sequences. Experimental results show that the proposed algorithm is better than conventional methods by around 2dB, and blocky artifacts and blur artifacts are significantly diminished.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.6
• /
• pp.123-131
• /
• 2009

The emerging display technology has been replaced the previous position of the CRT with the LCD. The nature of hold type display such as LCD, however, causes many problems such as motion blur and motion judder. To resolve the problems, we used frame interpolation technique which improves the image quality by inserting new interpolated frames between existing frames. In this paper, we propose a novel frame interpolation technique that uses dominant MV and variance different value in each block. At first, the proposed algorithm performs unidirectional motion estimation using blocking matching algorithm. The new frame is generated by pixel average using compared block variance or by pixel motion compensation using dominant motion vector, whether the motion estimation find the target area or not. Several experiments with the proposed algorithm shows that the proposed algorithm has better image quality than the existing bidirectional frame interpolation algorithm at the rate of about 3dB PSNR and has low complexity comparing to the unidirectional frame interpolation technique.

• Proceedings of the IEEK Conference
• /
• 2003.07e
• /
• pp.2080-2083
• /
• 2003

본 논문에서는 움직임이 존재하는 부분의 사선 방향 보간 성능을 개선하여 기존의 움직임 적응형 3 차원 순차 주사화 알고리즘 기법을 개선한 순차 주사화 방법을 제안하였다. 움직임 적응형 3 차원 순차 주사화를 위하여 밝기 형태 패턴(brightness profile pattern)을 이용하여 필드간의 움직임 정보를 좀 더 정확하게 추출할 수 있었으며 움직임이 있는 부분의 경우 에지의 방향 정보를 이용하여 사선 방향 보간을 수행함으로써 전체적인 순차 주사 변환 화질을 개선할 수 있었다. 제안된 알고리즘을 하드웨어로 구현하여 다양한 동영상에 대해서 성공적으로 적용됨을 확인하였다.