• Journal of the Korean Geotechnical Society
• /
• v.38 no.3
• /
• pp.17-26
• /
• 2022

Domestic district heating system needs safety management guidelines using the change of surface temperature to detect damages to buried heat pipes. This paper performed numerical analyses on the temperature change of ground surface due to the burial and leakage of heat pipes. Temperature difference between the ground surface above the buried heat pipes and the surrounding surface rises to a crescendo between 3 am and 8 am. It is more significant in winter rather than in summer. Low groundwater level magnifies the temperature increase of the ground surface by the heat pipe, which is smaller in the asphalt pavement than in the bare soil. Without leakage of the buried heat pipe, the temperature increment on the ground surface by the heat pipe is within 3.0℃ in the bare soil and 3.5℃ in the asphalt pavement. Leakage of the supply heat pipe in the bare soil increases the temperature on the ground surface gradually in the summer but rapidly in the winter. Asphalt pavement shows a lower increment and increasing rate of the temperature on the ground surface due to pipe leakage than bare soil surface. And leakage on both sides of the supply pipe takes 1-2 days for the temperature difference from the surrounding soil surface to reach 10℃.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.21 no.1
• /
• pp.209-220
• /
• 2022

With the worldwide spread of African swine fever, interest in livestock epidemics has increased. Livestock transport vehicles are the main cause of the spread of livestock epidemics, but there are no empirical quarantine procedures and standards related to the mobility of livestock transport vehicles in South Korea. This study extracted the trajectory of livestock-related vehicles using the facility-visit history data from the Korea Animal Health Integrated System and the DTG (Digital Tachograph) data from the Korea Transportation Safety Authority. The results are presented as exposure indices aggregating the link-time occupancy of each vehicle. As a result, 274,519 livestock-related vehicle trajectories were extracted, and the exposure values by link and zone were derived quantitatively. This study highlights the need for prior monitoring of livestock transport vehicles and the establishment of post-disaster prevention policies.

• The Mathematical Education
• /
• v.61 no.2
• /
• pp.323-338
• /
• 2022

The purpose of this study are to analyze how well middle and high school students understand the concept definition of quadrangle and to explore the phenomenon about their concept image. A test tool was developed and 60 8th graders, 63 9^th graders and 65 10^th graders were tested, and some students who needed in-depth analysis were interviewed. The results are as follows. First, it cannot be said that understanding level of the concept definition of the quadrangle naturally improves as the grade level goes up. Particularly, it was found that the understanding of the definition of the rhombus is the lowest in all three grades compared to other quadrangle. Second, although female students understood the definition of square better than male students, the understanding level of the definition of trapezoid, parallelogram, rhombus, and rectangle did not differ by gender. Third, it was found that the students who did not understand the concept definition of the quadrangle were more and more influenced by the concept image as the grade level went up. Fourth, it showed that a tendency to be less influenced by the concept definition and more influenced by textbooks and teachers as the grades go up when students form a concept image.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.2
• /
• pp.177-187
• /
• 2023

The Ship Safety Act prescribes matters necessary for the maintenance of seaworthiness and safe navigation of ships. In this regard, Article 10 of this Act requires shipowner to undergo occasional survey if he/she wants to temporarily change intends to modify the details entered in a ship survey certificate. Such measures are in accordance with the maintenance of the state of the ship after the ship inspection under Article 15 of this Act, and this Act includes "harbor construction work ship" under Article 39 Paragraph (1) of the Harbor Act. However, although the harbor construction work ship originally showed the same operating system as the barge, it was not applied to the Ship Safety Act and was registered and surveyed under the Construction Machinery Management Act. Then "Seokjeong No. 36" sinking accident in Ulsan on December 14, 2012, led to the amendment of the Harbor Act in 2016, and considering the fact that it was added to the Ship Safety Act and applied, there is a realistic limit to applying all the regulations stipulated in the Ship Safety Act to the harbor construction work ship. Accordingly, this study discusses the work characteristics through concept, registration, work area, survey regulations, application case of temporary alteration etc. of harbor construction work ships and controversial issues related to the scope of application of the Ship Safety Act of actual harbor construction work ships, and also the appropriate scope of "temporary alteration" among temporary inspections prescribed in Article 10 of the Ship Safety Act in consideration of the legislative purpose of incorporating harbor construction work ships into the survey subject to the Ship Safety Act in accordance with the revision of the Harbor Act.

• The Journal of Korean Institute of Next Generation Computing
• /
• v.13 no.3
• /
• pp.72-83
• /
• 2017

GPUs can provide high throughput with latency hiding by executing many warps in parallel. MSHR(Miss Status Holding Registers) for L1 data cache tracks cache miss requests until required data is serviced from lower level memory. In recent GPUs, excessive requests for cache resources cause underutilization problem of GPU resources due to cache resource reservation fails. In this paper, we propose a new warp scheduling technique to reduce stall cycles under MSHR resource shortage. Cache miss rates for each warp is predicted based on the observation that each warp shows similar cache miss rates for long period. The warps showing low miss rates or computation-intensive warps are given high priority to be issued when MSHR is full status. Our proposal improves GPU performance by utilizing cache resource more efficiently based on cache miss rate prediction and monitoring the MSHR entries. According to our experimental results, reservation fail cycles can be reduced by 25.7% and IPC is increased by 6.2% with the proposed scheduling technique compared to loose round robin scheduler.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.2
• /
• pp.215-229
• /
• 2023

Objectives: To validate the effectiveness of a real-time chemical exposure monitoring system developed by KOSHA (Korea Occupational Safety and Health Agency), we applied the system to a workplace in the electronics industry for 153 days. Methods: The monitoring system consisted of a PID chemical sensor, a LTE communication equipment, and a web-based platform. To monitor chemical exposure, four sets of sensors were placed in two manufacturing tasks - inspection and jig cleaning - which used TCE as a degreasing agent. We reviewed previous reports of work environment measurements and conducted a new work environment measurement on one day during the period. The PID sensor systems detected the chemical exposure levels in the workplace every second and transmitted it to the platform. Daily average and maximum chemical exposure levels were also recorded. Results: We compared the results from the real-time monitoring system and the work environment measurement by traditional methods. Generally, the data from the real-time monitoring system showed a higher level because the sensors were closer to the chemical source. We found that 28% of jig cleaning task data exceeded the STEL. Peak exposure levels of sensor data were useful for understanding the characteristics of the task's chemical use. Limitations and implications were reviewed for the adoption of the system for preventing poisoning caused by chemical substances. Conclusions: We found that the real-time chemical exposure monitoring system was an efficient tool for preventing occupational diseases caused by chemical exposure, such as acute poisoning. Further research is needed to improve the reliability and applicability of the system. We also believe that forming a social consensus around the system is essential.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.611-613
• /
• 2021

Recently, research and development of quantum computers, which exceed the limits of classical computers, have been actively carried out in various fields. Quantum computers, which use quantum mechanics principles in a way different from the electrical signal processing of classical computers, have various quantum mechanical phenomena such as quantum superposition and quantum entanglement. It goes through a very complicated calculation process compared to the calculation of a classical computer for performing an operation using its characteristics. In order to utilize each element efficiently and accurately, it is necessary to visualize the data before driving the actual quantum computer and perform error verification, optimization, reliability, and verification. However, when visualizing all the data of various elements configured inside the quantum computer, it is difficult to intuitively grasp the necessary data, so it is necessary to visualize the data selectively. In this paper, we visualize the data of various elements that make up a quantum computer, and hierarchically visualize the internal circuit components of a quantum computer that are complicatedly configured so that the data can be observed and utilized intuitively.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.1
• /
• pp.10-20
• /
• 2022

Objectives: The aim of this study is to evaluate exposure levels of the extremely low frequency magnetic fields(ELF-MF) radiated from various electric facilities in Liquid Crystal Display(LCD) manufacturing processes. Methods: This study measured the exposure levels of personal and local ELF-MF for the electronic facilities installed in two LCD manufacturing companies. Samplers were installed around workers' waist during working hours to identify personal exposure levels, and direct reading equipment were located at 3 cm, 10 cm, and 30 cm away from the surface of the electronic facilities to measure local exposure levels. Average and maximum(ceiling) values were calculated for personal and local exposure levels. Results: Average and maximum of personal exposure levels for each worker were 0.56(mean) ± 0.02(SE) µT and 6.31 ± 0.75 µT, respectively. Statistical analyses of the study found that maximum of the personal exposure levels for engineers was significantly higher than that for operators since engineers spend more time near the electronic facilities for repairing. The range of maximum personal exposure levels was 0.50 ~ 43.50 µT and its highest level was equivalent to 4.35 % of ACGIH(American Conference of Governmental Industrial Hygienists) exposure limit value(1 mT). Maximum of local exposure levels was 8.18 ± 0.52 µT and the electronic facilities with higher exposure levels were roof rail and electric panel, which were not related to direct manufacturing. The range of maximum local exposure levels was 0.60 ~ 287.20 µT and its highest level was equivalent to 28.7 % of the ACGIH exposure limit value. Lastly, the local exposure levels significantly decreased as the measurement distance from the electronic facilities increased. Conclusions: Maximum of personal and local exposure levels did not exceed the exposure limit value of ACGIH. However, it is recommended to keep the workers as far as possible from the sources of ELF-MF.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.21-22
• /
• 2020

낙동강 하굿둑(이하 하굿둑)은 1987년 부산 사하구와 강서구 사이에 건설되어 하류 지역의 바닷물 유입을 막아 부산, 울산, 경남 등에 안정적으로 생활·농업·공업 등의 분야에 용수를 공급하는 역할을 해왔다. 현재, 하굿둑의 수문은 낙동강 상류로부터 하류로 흘러내려오는 민물(담수)을 방류하기 위해서만 하굿둑 수문을 개방하고 있다. 하구는 하천의 담수와 바다의 염수가 서로 만나는 구역으로 바닷물과 염수의 밀도차에 의한 혼합으로 자연상태의 하구에서는 담수와 염수가 섞이는 기수역이 형성되며, 이러한 특성으로 하구 인근의 지역에서는 일반적인 하천 및 해양, 연안과는 분명히 구별되는 생태계가 조성된다. 하굿둑 건설이후 바닷물(해수)과 민물(담수)이 만나는 낙동강 어귀에 기수생태계가 사라지면서 바닷물이 유입될 수 있도록 하여 생태계를 복원해야 한다는 필요성이 제기되어 왔으며, 하굿둑이 지역에 기여해온 사실은 분명하나 하굿둑으로 인해 생태계 단절이 발생하고 기수생태계가 파괴되었기 때문에 이를 해결하기 위해서는 하굿둑을 개방하여 과거 기수생태계를 복원해야 한다는 목소리가 높아지고 있다. 이에 따라 정부에서는 하굿둑의 기수생태계 복원을 위해서 관계기관 합동으로 의사결정을 하고 효율적인 개방 방안을 모색하는 실무협의회를 구성하여 운영 중이고, 실무협의회 논의를 통해 5개 주요 관계기관(환경부, 국토부, 해양수산부, 부산광역시, K-water) 공동으로 "낙동강하굿둑 운영개선 및 생태복원 방안 연구용역"을 추진 중이다. 2018년 1단계 용역이 완료되었으며, 2019년부터 2단계 연구용역을 추진 중이고 하굿둑 개방의 수준별로 각종 영향을 검토한 후 대책을 마련하여 기수생태계 복원 방안을 수립하는데 그 목적이 있다. 2단계 연구용역에서는 과학적이고 합리적인 기수생태계 복원방안 마련을 위해서 실제로 해수를 유입시키는 3차례의 실증실험 및 수리모형실험 등을 추진한다. 기존 연구들에서도 수문개방에 따른 해수유입 영향에 대해 모델링을 통해서 분석했지만 이는 검증이 이루어지지 않은 결과로 이번 용역에서는 실제 해수를 유입시키고 염분의 침투 및 각종 수생태 영향을 모니터링 한 후 그 결과를 반영하여 모델링을 고도화하고 있다. 최종적으로 고도화된 모델링 결과를 기반으로 기수생태계 조성 방안별로 염분, 수질, 수생태, 침퇴적 등 각종 분야에 대한 정확한 영향을 분석하고 이에 대한 대책을 포함하여 최종적으로 바람직한 기수생태계 복원 방안을 제시할 계획이다. 기수생태계 복원 방안이 계획에만 그치지 않고 실행으로 연결시키기 위해서 필요성에 대한 이해를 바탕으로 공감대를 형성해 나아가고 있으며 지역주민, 전문가, 관계기관 등 민(民)·관(官)·학(學) 다양한 의견을 수렴하여 하구지역내 수량-수질-수생태를 종합적으로 고려하여 복원 방안을 마련 후 사회적인 합의를 추진하여 확정할 예정이며, 하구의 안정적인 관리를 위해 AI 등 4차 산업혁명기술을 적극 적용하는 스마트한 하구물관리(Smart Estuary Watershed Management)"를 활용한 "하구통합물관리" (Estuary Integrated Watershed Management) 등 과학적인 관리를 추진할 계획이다.

• Analytical Science and Technology
• /
• v.19 no.6
• /
• pp.482-489
• /
• 2006

Two electrode-based lactate biosensor was prepared by immobilizing lactate oxidase (LOD) obtained from pediococcus species in a poly(vinyl alcohol). Hydrogen peroxide ($H_2O_2$) produced by the reaction of lactate and LOD was detected on the Pt-black that was electrochemically deposited on the Au electrode. Sensors fabricated with Pt-black deposited Au electrode provided a high current of $H_2O_2$ oxidation at a substantially lowered applied potential (+300 mV vs. Ag/AgCl), resulting in reduced interferences from easily oxidizable species such as ascorbic acid, acetaminophen, and uric acid. An outer membrane is formulated by adjusting water uptake of hydrophilic polyurethane (HPU). The sensor performance was evaluated in vitro with both flow-through arrangement and static mode. The sensor showed a linear range from 0.1 mM to about 9.0 mM in 0.05 M phosphate buffer (pH 7.6) containing 0.05 M NaCl. Storing the sensors prepared in this work at $4^{\circ}C$ buffer solution while not in use, they provided same electrochemical performance for more than 25 days.