• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.71-71
• /
• 2017

농용트랙터의 운전자는 작업, 주행으로 인한 유해한 저주파 진동에 장시간 노출된다. 이에 따라 운전자에게 전달되는 노면 진동을 감소시켜주기 위한 전방차축 현가장치의 역할이 커지고 있다. 트랙터의 전방차축 현가장치는 주로 유압식으로 설계되어 있으며 이를 구성하는 유압요소 선정이 현가장치의 성능에 중요한 영향을 미친다. 하지만, 실제와 유사한 조건에서 트랙터 차체 무게만큼 큰 부하를 제공하여 유압회로의 성능을 실험하는 것은 비용과 시간 측면에서 비효율적이다. 본 연구에서는 이를 대체하기 위하여 개별 유압요소의 성능을 테스트 할 수 있는 현가장치 유압회로 요인 시험기를 설계제작 하였다. 이를 이용하여 개별 부품의 성능곡선을 센서를 이용 측정하였고 얻은 특성값을, 구성한 유압 시뮬레이션 모델에 반영하여 실제조건의 유압특성을 얻을 수 있는 유효한 시뮬레이션 모델 개발에 활용하였다. 또한, 실험실 환경에서 유압식 현가장치를 간소화 시킨 형태로 유압회로의 성능을 예비시험해 볼 수 있도록 다양한 센서를 장착 데이터를 취득할 수 있도록 하였다. 개발한 요인 시험기는 하부에 설치된 가진 실린더를 이용하여 상부에 설치된 현가장치 실린더의 스트로크 변위와 속도에 따른 힘을 측정할 수 있도록 구성하였다. 이를 위해 현가장치 실린더의 헤드부와 로드부에 각각 압력센서를 설치하였으며 헤드부, 로드부의 압력 차이와 로드셀을 이용해 측정한 가진 실린더의 힘의 관계를 확인하였다. 상부의 현가 실린더 장치는 복동 형태로 제작되어 헤드부, 로드부 양쪽 방향으로 유량이 흐를 수 있도록 설계되었다. 이를 이용해 헤드부와 로드부 사이에 어큐뮬레이터, 가변 오리피스, 릴리프 밸브 등으로 유압회로를 구성하였으며 어큐뮬레이터 용량에 따른 힘의 변화, 가변 오리피스의 개도량에 따라서 전달되는 힘의 크기 등을 측정하였다. 하부의 가진 실린더는 사인파, 삼각파, 계단 입력, DC 레벨 등의 신호를 발생시킬 수 있도록 제작되었다. 신호의 주파수는 0~4Hz, 범위에서 사용자가 조절할 수 있도록 설정되었으며 계단응답 성능 측정 시험을 평가한 결과 정상상태오차는 0.470mm~0.536mm, 입상시간은 0.194초~0.202초, 정착시간은 0.230초~0.421초로 나타났다.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.20 no.6
• /
• pp.899-915
• /
• 2018

In this study, in order to construct an eco-friendly advanced road transportation network, the multi-layer tunnel, which is a small-sized car road, is designed to have a height of less than 60 cm. However, the shape of the tunnel is low and the height of the traffic sign is small. In order to solve these problems, traffic sign characters were designed in three dimensions, and the possibility of applying the design of the three - dimensional sign that can obtain greater visibility than the existing signs at the same distance and the possibility verification through virtual simulation were performed. The three-dimensional sign is horizontally installed on the ceiling of the multi-layer tunnel. To be seen vertically, it is enlarged by a certain ratio by the perspective, and the width and height are enlarged. Respectively. In addition, 3D simulation was performed to verify the visibility of the stereoscopic signs when the driver ran through the stereoscopic sign design specifications. As a result of the design and experimental study, it was confirmed that the stereoscopic sign could be designed through the theoretical formula and that it could provide the driver with a larger traffic sign character because there is no limitation of the facility limit compared to the existing vertical traffic sign. Also, we confirmed that it can be implemented in the side wall by using the stereoscopic sign design principle installed on the ceiling part. It was confirmed that the design of the stereoscopic sign can be designed to be smaller as the distance that the driver visually recognizes the sperm is shorter, the height of the protrusion vertically at the lower part of the stereoscopic sign becomes higher. As a result of 3D simulation running experiment based on the design information of the stereoscopic sign, it was confirmed that the stereoscopic sign is visually the same as the vertical sign at the planned distance. Although the detailed research and institutional improvement of stereoscopic signs have not been made in Korea and abroad, it is evolved into a core technology of new road traffic facilities through various studies through the possibility of designing and applying stereoscopic signs developed through this study Expect.

• Journal of Korean Society of Transportation
• /
• v.34 no.1
• /
• pp.29-42
• /
• 2016

Speeding is an important factor in traffic safety. Speed not only affects crash severity, but is also related to the possibility of crash occurrence. This study presents results from an analysis of 27,968 speed violation cases collected from 36 red light and speed enforcement cameras at signalized intersections in the city of Cheongju. Data included details of their violation history such as speeding tickets within a recent 3-year span and their demographic characteristics. The goal of this analysis is to understand the correlation between speed violations and various factors in terms of humans, vehicles and road environments. This study used descriptive statistics and Binary Logistics Regression(BLR) analysis with SPSS 20.0 software. The major results of this study are as follows. First, speed violations occurred at rural and suburban area. Second, about 25.6% of the violators committed to more than 20km/h over a speed limit. Third, the difference between speed violators and normal drivers clearly appeared in location of intersection(urban/rural/suburban area), gender and age. Finally, a statistically significant model(Hosmer and Lemeshow test: 11.586, p-value: 0.171) was developed through the BLR.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.41 no.6
• /
• pp.697-705
• /
• 2021

Currently, roadway operation agencies provide interior zones of tunnels with emergency information including crash, fire, and vehicles' stop, through state-of-the-art technologies such as variable message signs and radio-based broadcast systems. However, when coping with an emergency in tunnel interior zones, such information could be too late for drivers to access. A radio-based emergency alert system at the access zones of freeway tunnels, on the other hand,could be a good alternative for solving this problem. Therefore, the objective of this study is to assess user acceptability of such an alternative system. To carry out this study, an online survey was conducted on 762 drivers, and the survey results were analyzed using a structural equation modeling to identify factors affecting acceptability of the proposed system. As a result, driver characteristics such as age group, driving frequency, and driving career, utilization of conventional traffic information, and usefulness of conventional traffic information have a positive impact on acceptability. It is expected that the findings of the study will be a basis to effectively address and deploy a new emergency alert system at the access zones of freeway tunnels.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.4
• /
• pp.62-69
• /
• 2013

Visual demands associated with in-vehicle display usage and text messaging distract a driver's visual attention from the roadway. To minimize eyes-off-the-road demands, voice interaction systems are widely introduced. Under cognitively distracted condition, however, awareness of the operating environment will be degraded although the driver remains oriented to the roadway. It is also know that the risk of inattentive driving varies with age, thus systematic analysis of driving risks is required for the older drivers. This paper aims to understand the age-related driving performance degradation and visual attention changes under auditory cognitive demand which consists of three graded levels of cognitive complexity. In this study, two groups, aged 25-35 and 60-69, engaged in a delayed auditory recall task, so called N-back task, while driving a simulated highway. Comparisons of younger and older drivers' driving performance including mean speed, speed variability and standard deviation of lane position, and gaze dispersion changes, which consist of x-axis and y-axis of visual attention, were conducted. As a result, it was observed that gaze dispersion decreased with each level of demand, demonstrating that these indices can correctly rank order cognitive workload. Moreover, gaze dispersion change patterns were quite consistent in younger and older age groups. Effects were also observed on driving performance measures, but they were subtle, nonlinear, and did not effectively differentiate the levels of cognitive workload.

• Proceedings of the KOR-KST Conference
• /
• 2007.11a
• /
• pp.315-322
• /
• 2007

신호교차로 교통사고는 90년대 이후 도시가 발달하고 산업이 고도화됨에 따라 교통 혼잡 문제와 함께 심각한 사회문제로 대두되고 있다. 특히 신호교차로의 교통사고는 인적요인, 차량요인, 환경적 요인 등이 복합적으로 작용하여 발생하는데, 교통량의 집중과 도로의 기하구조, 운전자 과실 등이 교통사고의 주요 인자로 작용하고 있다. 본 연구에서 교통사고 예측모형을 개발하기 위해서 2003년부터 2006년도까지 실제 경기도의 신호교차로에서 발생한 교통사고자료를 기초로 하였다. 구체적으로는 시내가 아닌 지방부 성격을 지닌 일반국도를 대상으로 하였다. 지방부 일반국도의 신호교차로 교통사고 분석에 단순통계분석과 다중회귀분석을 사용하였다. 사고와 관계가 높은 신호주기, 방향별 접근 교통량, 회전교통량 둥과 같은 도로, 교통, 운영조건들로 변수를 정하여 교통사고 예측모형을 도출하였다. 본 연구에서는 도로조건, 교통조건, 운영조건들과 사고와의 관계를 이용하여 경기도 일반국도의 신호교차로 교통사고예측모형을 개발하였고, 이는 지방부 성격을 지닌 교차로에 적용이 가능하다고 판단된다.

• Proceedings of the Korea Contents Association Conference
• /
• 2010.05a
• /
• pp.322-324
• /
• 2010

교통량이 적은 신호교차로에서는 신호에 의한 불필요한 지체가 발생하는 경우가 많다. 특히 지방부 신호교차로의 경우 불필요한 신호 대기로 인해 운전자가 신호위반을 하거나 불필요한 지체를 경험하게 된다. 이를 해결하기 위한 방안으로 비교적 교통량이 적은 신호교차로를 회전교차로로 운영하여 해결할 수 있다. 본 연구에서는 지방부에 설치된 신호교차로를 분석하고 이를 회전교차로로 개선하였을 경우 그 효과를 비교분석하였다. 분석 결과 지체감소 효과가 있었으며, 통행시간 및 평균속도의 증가를 가져오는 것을 확인하였다. 또한 안전성 측면에서 교차로 상충횟수도 감소하는 것을 확인하였다.

• Journal of Korean Society of Transportation
• /
• v.26 no.3
• /
• pp.187-197
• /
• 2008

While driving a highway, A driver gets lots of information through geometrical structure, traffic situation, signs on the road. He gets most of the information by visual sense. Acceleration or deceleration and driving direction depend on sight distance. Therefore, it's essential to secure a driver's sight distance for a safe drive. However, design guides of geometrical structure and sight distance suggest respective standards of horizontal and vertical alignment. They do not indicate quantitative standard of combined alignment. Currently, element separated on a two-dimensional projected plane are available, but they do not guarantee safe and pleasant design. I will use the existent model analysing three-dimensional sight distance through mathematical calculation and sort a variety of geometrical structure element and type. In these researches, we will look at how much three-dimensional sight distance is overestimated or underestimated compared to two-dimensional. I will develop a program which predicts traffic velocity on the curvature of two-lane provincial road. stopped sight distance and three-dimensional sight distance will be compared at a predicted drive velocity. I will suggest the way to evaluate road consistency.

• Journal of Korean Society of Transportation
• /
• v.19 no.3
• /
• pp.45-58
• /
• 2001

Subjective mental workload assessment technique becomes a standard human factors and human-machine interface evaluation tool for the evaluation of ITS(Intelligent Transport Systems)-oriented information systems as well as the drivers visual activity analysis, physiological indices(GSR, EEG, ECG, etc.), secondary task performance, reaction time. vehicle control parameters(speed, steering behavior, accelerator control) that are widely applied for transportation and vehicle systems to evaluate the safety, to decide the system or design alternatives, and to establish the design guidelines. This paper reviewed and compared the most globally employed four mental workload assessment techniques that have been designed for the use of various human-machine systems and ITS-oriented in-vehicle information systems. NASA-TLX(National Aeronautics and Space Administration-Task Load Index). SWAT(Subjective Workload Assessment Technique), MCH(Modified Cooper-Harper) scale, and recently developed RNASA-TLX(Revision of NASA-TH) were compared in terms of sensitivity and subjective evaluations to derive the human-machine interface evaluation guidelines for the application of ITS-oriented in-vehicle information systems. Then, experiment results supported that RNASA-TLX is the prospective tool for the mental workload assessment of ITS-oriented in-vehicle information systems.

• International Journal of Highway Engineering
• /
• v.8 no.4 s.30
• /
• pp.1-11
• /
• 2006

Currently, road mobility improved from the National Road Improvement. Nevertheless delineation system is facility that enhanced driver's safety, that was set up often inconsistent or nonexistent over the road exit ramp So it judged functional investigation will be necessary. This study suggested setting type of the delineation system. That was based on a field study and reviews the legal standard of it and considering driver's cognition behavior. For the study, make a 3D-simulation and so could objectively a comparative test. Comparison variable between delineation setting type is selected conspicuity and visibility. Cased that illustrated characteristics of driver's visual cognition behavior. The experiment was used Eye Marker Recorder for measure the gaze frequency more quantitatively and objectively. And used the ANOVA analysis for significance testing between delineation setting type. A significant percent of the conspicuity analyzed types(Safe mark, Obstacle Sign, Warning Light, and Tubular Maker) in road exit ramp for recognize. And gaze frequency that measure of effectiveness of visibility are measured. On the analysis result, the visibility was significance difference between delineation setting type and visibility of types was best.