• The Journal of Korea Robotics Society
• /
• v.5 no.4
• /
• pp.286-293
• /
• 2010

The trailer system offers efficiency of transportation capability. However, it is difficult to control the backward motion. It is an open loop unstable problem. To solve this problem, we are proposed the driver assistance system. Driver assistance system assists a driver to control the backward motion of trailer system as if forward motion. A driver only secure the rear view of last passive trailer, and select the control input to drive the last passive trailer. The driver assistance system converts the control input of the driver into velocity and steering angle of the vehicle using the inverse kinematics. It is possible by electronic control input devices and the rear view camera. Effectiveness of driving assistance system is verified by the simulation and the experiments.

• Journal of Auto-vehicle Safety Association
• /
• v.12 no.3
• /
• pp.34-42
• /
• 2020

ADAS (Advanced Driver Assistance Systems) uses sensors such as camera, radar, lidar and GPS (Global Positioning System). Among these sensors, the camera has many advantages compared with other sensors. The reason is that it is cheap, easy to use and can identify objects. In this paper, therefore, a theoretical formula was proposed to obtain the distance from the vehicle's front wheel to the lane using a monocular camera. And the validity of the theoretical formula was verified through the actual vehicle test. The results of the actual vehicle test in scenario 4 resulted in a maximum error of 0.21 m. The reason is that it is difficult to detect the lane in the curved road, and it is judged that errors occurred due to the occurrence of significant yaw rates. The maximum error occurred in curve road condition, but the error decreased after lane return. Therefore, the proposed theoretical formula makes it possible to assess the safety of the LKA system.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.641-646
• /
• 2000

This paper addresses a throttle/brake control law for stop and go cruise control systems which make the vehicle remain at a safe distance from a preceding vehicle according to the driver's preference, automatically slow down and come to a full stop behind a preceding vehicle. The uncertainties of vehicle model have been considered in the design of the control law. The effect of throttle/brake control has been investigated via simulations. The simulations were performed using a complete nonlinear vehicle model. The results indicate that the proposed throttle/brake control law can provide the stop and go cruise control system with a good distance tracking performance.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.418-420
• /
• 2012

최근 자동차 산업의 활성화로 인해 교통사고가 문제화 되면서 사고를 미연에 방지할 수 있는 운전자 보조시스템 연구가 활발하게 이루어지고 있다. 그 중 AVM 시스템(Around-View Monitoring System)에 대한 연구 및 개발이 활발해 지고 있다. 기존 AVM 시스템은 차량 주변 상황을 실시간으로 제공하기 위해 임베디드 시스템 또는 SoC(System on Chip)의 형태로 개발되었다. 그러나 Car PC가 차량에 장착되면 AVM 시스템을 추가의 비용이 없이 소프트웨어만으로 시스템을 개발할 수 있다. 본 논문에서는 Car PC 기반의 AVM 시스템 기능에 위치 정보 기능을 추가하여 위치정보를 제공하는 AVM 시스템을 구현하고자 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.25 no.2
• /
• pp.219-226
• /
• 2017

This paper addresses the effective and quantitative image DB construction for the development of front looking camera systems. The automotive industry has expanded the capability of front camera solutions that will help ADAS(Advanced Driver Assistance System) applications targeting Euro NCAP function requirements. These safety functions include AEB(Autonomous Emergency Braking), TSR(Traffic Signal Recognition), LDW(Lane Departure Warning) and FCW(Forward Collision Warning). In order to guarantee real road safety performance, the driving image DB logged under various real road conditions should be used to train core object classifiers and verify the function performance of the camera system. However, the driving image DB would entail an invalid and time consuming task without proper guidelines. The standard working procedures and design factors required for each step to build an effective image DB for reliable automotive front looking camera systems are proposed.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.741-746
• /
• 2001

This paper presents an investigation of a vehicle-to-vehicle distance control using a Hardware-in-the-Loop Simulation(HiLS) system. Since vehicle tests are costly and time consuming, how to establish a efficient and low cost development tool is an important issue. The HiLS system consists of a stepper motor, an electronic vacuum booster, a controller unit and two computers which are used to form real time simulation and to save vehicle parameters and signals of actuator through a CAN(Controller Area Network). Adoption of a CAN for communication is a trend in the automotive industry. Since this environment is the same as that of a real vehicle, a distance control logic verified in laboratory can be easily transfered to a test vehicle.

• Information and Communications Magazine
• /
• v.34 no.5
• /
• pp.3-9
• /
• 2017

운전자 보조 시스템이나 자율 주행 자동차 기술의 등장 등 자동차 산업이 고도화됨에 따라 차량에 탑재되는 전기/전자 시스템의 수와 시스템의 복잡도가 점차 증가하고 있다. 특히 주행 중심에서 안전 중심으로 산업의 패러다임이 변화함에 따라 전기/전자 시스템의 오작동으로 인한 사고를 방지하는 것이 중요 이슈로 부각되었고, 이를 충족하기 위해 지난2011년 자동차 기능안전 국제 표준인 ISO 26262가 제정되었다. ISO 26262:2011은 총 10개의 Part로 구성되어 있으며, 개발 초기단계부터 생산 및 운영, 폐기단계까지 준수해야 할 안전 관련 요구사항을 제시하고 있다. OEM을 비롯한 많은 협력 업체들은 이미 이를 준수하여 국내외 완성차 업체에 대응하고 있으며, 더 나아가 2018년에 예정된 ISO 26262 2차 개정을 미리 준비하고 있다. 본 고에서는 ISO 26262:2011의 등장 배경과 개념에 대해 설명하고, ISO 26262:2011의 효과적인 대응을 위한 수행 방안을 Part 3 개념 단계부터 Part 6 소프트웨어 수준의 제품 개발 단계까지 주요 핵심 수행 활동을 중심으로 소개한다.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.208-221
• /
• 2020

The objective of this study is to estimate and analyze the traffic density of continuous flow using the trajectory of individual vehicles and the headway of sample probe vehicles-front vehicles obtained from ADAS (Advanced Driver Assitance System) installed in sample probe vehicles. In the past, traffic density of continuous traffic flow was mainly estimated by processing data such as traffic volume, speed, and share collected from Vehicle Detection System, or by counting the number of vehicles directly using video information such as CCTV. This method showed the limitation of spatial limitations in estimating traffic density, and low reliability of estimation in the event of traffic congestion. To overcome the limitations of prior research, In this study, individual vehicle trajectory data and vehicle headway information collected from ADAS are used to detect the space on the road and to estimate the spatiotemporal traffic density using the Generalized Density formula. As a result, an analysis of the accuracy of the traffic density estimates according to the sampling rate of ADAS vehicles showed that the expected sampling rate of 30% was approximately 90% consistent with the actual traffic density. This study contribute to efficient traffic operation management by estimating reliable traffic density in road situations where ADAS and autonomous vehicles are mixed.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.1
• /
• pp.126-136
• /
• 2014

In the Advanced Driver Assistance Systems (ADAS) of smart vehicle and Intelligent Transportation System (ITS) for to detect the boundary of lane is being studied a lot of Hough Transform. This method detects correctly recognition the lane. But recognition rate can fall due to detecting straight lines outside of the lane. In order to solve this problems, this paper proposed an algorithm to recognize the lane boundaries and the accumulator cells in Hough space. Based on proposed algorithm, we develop application for Android was developed by H/W verification. Users of smart phone devices could use lane detection and lane departure warning systems for driver's safety whenever and wherever. Software verification using the OpenCV showed efficiency recognition correct rate of 93.8% and hardware real-time verification for an application development in the Android phone showed recognition correct rate of 70%.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.3
• /
• pp.499-505
• /
• 2012

TPMS(Tire Pressure Monitoring System) using the wireless communication technique is defined as the safety aid system to efficiently realize and manage the condition of tires in the vehicle. The wireless communication system of TPMS should suffers from various noise and interferences such as signals of each tire sensor or outside electrical equipments. In order to retain the data reliability of TPMS, we propose an assessment method of the data reliability based on signal-to-interference and noise ratio (SINR) of the received signal. The proposed technique can be widely applied to wireless duplex communication systems based on various sensors. We verify critical SINR values to satisfy data reliabilities of 95%, 97%, and 99% through computer simulation.