• Journal of the Korean Geotechnical Society
• /
• v.40 no.1
• /
• pp.55-63
• /
• 2024

In this study, a thermomechanical numerical model was developed to evaluate the stability of energy slabs. First, a wall-type energy slab was installed in a residential underground parking lot, and thermal performance tests were conducted. Based on the tests, a numerical thermohydraulics model of the energy slab was developed to accurately simulate the thermal behavior in thermal performance tests. Finally, utilizing the temperature data acquired using the developed model, a thermomechanical numerical model of the energy slab was established. The thermomechanical model was then used to simulate the thermal stresses induced by operating the energy slab. The results demonstrated a maximum thermal stress of 5,300 kPa, which highlights the need to utilize cement mortar with sufficient tensile strength to realize stable operation of the energy slab.

• Journal of Advanced Navigation Technology
• /
• v.28 no.5
• /
• pp.664-669
• /
• 2024

Recently, the development of a Korean fighter jet is underway in Korea. As a result, various armament/equipment that can perform various missions will be installed and linked. In order for the aircraft and armament/equipment to be successfully installed and linked, they must be designed and developed based on linkage standards and must operate according to the operating procedures. In addition, safety and reliability must be verified through many repeated tests. In this paper, in order to optimize the resources (time, cost, manpower) consumed by performing repeated tests, an inspection system was developed according to the MIL-STD-1760, an airborne standard interface, and software that can perform aircraft linkage procedures in real time was installed to secure an integrated inspection system that can verify the linkage of armament/equipment in advance.

• Journal of Venture Innovation
• /
• v.4 no.2
• /
• pp.97-108
• /
• 2021

Labor contracts appear in form as an exchange relationship between labor products and wages, but since they transcend the level of simple barter, they can be economically identified as "trading" and can be identified as "rental." From a legal point of view, a legal device that legally supports and imposes binding force on commodity exchange relations is a contract. Such a labor contract led to a relationship in which wages were received and a certain amount of time was placed under the direction and supervision of the employer as a counter benefit to the receipt of wages. Since working hours are subordinate hours with one's labor under the disposition authority of the employer, long hours of work can be done for the health and safety of workers and furthermore, it can be an act that violates the value to enjoy as a human being. The reduction of working hours needs to be shortened in terms of productivity and enjoyment of workers' culture so that they can expand and reproduce, but users' corporate management labor and production activities should also be compatible compared to those pursued by capitalist countries. Working hours can be seen as individual time and time in society as a whole, and long hours of work at the individual level are reduced, which is undesirable at the individual level, but an increase in products due to an increase in production time at the social level can help social development. It is necessary to consider working hours in terms of finding the balance between these individual and social levels. If the regulation method of working hours was to regulate the total amount of working hours, flexibility and elasticity of working hours are a qualitative regulation method that allows companies to flexibly allocate and organize working hours within a certain range of up to 52 hours per week. Accordingly, it is necessary to shorten working hours, but expand and implement the flexible working hours system according to the situation of the company. To this end, it is necessary to flexibly operate the flexible working hours system, which is currently limited to six months, handle the selective working hours by agreement between employers and workers, and expand the target work of discretionary working hours according to the development of information and communication technology and new types based on the 4th industrial revolution.

• Journal of Conservation Science
• /
• v.30 no.2
• /
• pp.137-148
• /
• 2014

Large scale anoxic chamber system(volume $28m^3$) was developed and installed at The National Folk Museum of Korea for the first time in Korea. In order to get optimal anoxic treatment condition, we compared the disinfection of adults, larvae and eggs of cigarette beetles using nitrogen and argon. The time for complete disinfection of cigarette beetles in pine wooden blocks exposed to nitrogen at oxygen concentration 0.01% and 50% in relative humidity were 15 days at $20^{\circ}C$, 10 days at $25^{\circ}C$, and 7 days $30^{\circ}C$. Time were 10 days at $20^{\circ}C$, 7 days at $25^{\circ}C$, and 5 days $30^{\circ}C$ in argon anoxic atmosphere. From the mortality of cigarette beetles, optimal disinfection condition was oxygen concentration 0.01%, $25^{\circ}C$ in temperature, 50% in relative humidity and exposure time 21 days at nitrogen atmosphere. And when large scale anoxic chamber system was supplied nitrogen by nitrogen generator for anoxic treatment of many collections or large collections, it could be operated stably. To verify optimal disinfection condition, museum insects(adults, larvae, pupae and eggs of cigarette beetles in pine wooden blocks, cotton fabrics and Korean paper book, adults and larvae of drugstore beetles in pine wooden blocks, cotton fabrics and Korean paper book, larvae of varied carpet beetles in pine wooden block and silk fabrics, adults and larvae of hide beetles and adults of rice weevils in breeding boxes) which exposed at optimal disinfection condition, were completely killed.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.1 no.1
• /
• pp.69-84
• /
• 1993

In order to determine the optimum operational paramsters in cow manure composting, 4 laboratory scale composters were established. The cow manure was mixed with certain amount of saw dust to adjust the initial C/N ratio to 24, initial pH to 6.9 and composting was performed with varying operational conditions. It was found that the optimum aeration rate was 1000 ml/min kg. VS, the optimum moisture content 50% and no significant difference was found with different initial pH condition. Microorganisms were counted under the optimum conditions determined in this study. At the end of the experimental period, the number of bacteria, actinomycetes and fungi was $1.5{\times}10^9$ cells, $1.1{\times}10^8$ cells and $3.0{\times}10^8$ cells/g dry compost, respectively. At day 0, the number of coliforms, fecal coliforms and fecal streptococci was $3.1{\times}10^3$ cells, $7.5{\times}10^2$ cells and $5.6{\times}103$ cells/g dry composting material, respectively. Their population was decreased with time lapse, However, their survival time was longer than those reported by other researchers. Microorganisms were identified at the end of the experiment. Genus Bacillus was the most dominant comprising 89.3% of the total population. Among the Genus Bacillus, B. circulans compoex was the most abundant, followed by B. Stearothermophilus, B. Sphericus, B. licheniformis and B, brevis.

• Journal of Navigation and Port Research
• /
• v.30 no.10 s.116
• /
• pp.855-860
• /
• 2006

In the environment where multiple AGVs(Automated Guided Vehicles) operate concurrently in limited space, collisions, deadlocks, and livelocks which have negative effect on the productivity of AGVs occure more frequently. The accelerated motion of an AGV is also one of the factors that make the AGV routing more difficult because the accelerated motion makes it difficult to estimate the vehicle's exact travel time. In this study, we propose methods of avoiding collisions, deadlocks, and livelocks using OAR(Occupancy Area Reservation) table, and selecting best route by estimating the travel time of an AGV in accelerated motion. A set of time-driven simulation works validated the effectiveness of the proposed methods.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.2
• /
• pp.196-206
• /
• 2012

AESA radar is able to instantaneously and adaptively position and control the beam, and such adaptive beam pointing of AESA radar enables to remarkably improve the multi-mission capability, compared with mechanically scanned array radar. AESA radar brings a new challenges, radar resource management(RRM), which is a technique efficiently allocating finite resources, such as energy and time to each task in an optimal and intelligent way. Especially radar beam scheduling is the most critical component for the success of RRM. In this paper, we proposed stochastic radar beam scheduling algorithm using simulated annealing(SA), and evaluated the performance on the multi-function radar scenario. As a result, we showed that our proposed algorithm is superior to previous dispatching rule based scheduling algorithm from the viewpoint of beam processing latency and the number of scheduled beams, with real time capability.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.11 s.353
• /
• pp.200-209
• /
• 2006

In recent years, studies on effective data services based on GMPLS are introduced so as to support excessive internet traffic. and filled operation can reduce transmission effectiveness. In this thesis we proposed merging algorithm with hierarchical structure and implementation procedure using ns -2 simulator. The structure composed of tunnel nodes and general nodes. Each node has threshold processing time. Result of that, the operation labels can be calculated. In order to evaluate the performance, we used ns-2 network simulator tool and used variable time parameters. The evaluated values can be used in surplus wavelength and be Possible to process additional traffic. Label merging will bring a decrease in the cost of channel sources for future network configuration.

• Journal of the military operations research society of Korea
• /
• v.36 no.3
• /
• pp.29-42
• /
• 2010

In this study, the weapon-target assignment problem arising in military application of operations research is considered. We reformulated the problem in order to simplify the solution methods based on genetic algorithms and heuristics. Since the problem is well known as NP-complete and cannot be solved in polynomial time, such solution methods have been widely used to obtain good solutions. Two chromosome representations--target number representation and permutation representation--in genetic algorithm are compared. In addition, a construction heuristic and three improving heuristics are developed. Several experiments under the condition of transitivity rules in weapon's kill probability have been accomplished. It shows that the construction heuristic and exchange-based improving heuristic guarantees good solutions within a second and the performance of construction heuristic is sensitive to transitivity rules.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2014.06a
• /
• pp.15-16
• /
• 2014

As trade cross the world is increasing these days, safe and effective management of harbour system is becoming important issue. With this background, the development of automatic time-domain simulation programme for ship berthing operation has been being peformed and PD (Proportional Derivative) controller has been used to control the speed and the heading angle of ships. This paper provides feasibility study for developing the time-domain simulation programme for berthing operation of ships with analysing advantages and drawbacks of the two different mathematical models, one is for low advance speed of ships by Kose (1984) and the other is MMG model for normal advance speed, through the simulations with various initial heading angles and positions of the ship.