• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.4
• /
• pp.315-321
• /
• 2003

The integrity of the turbine rotors can be assessed by measuring the material properties at service temperature. In order to evaluate the remanent life of turbine rotor steel nondestructively, a measurement system of reversible magnetic permeability using an alternating perturbing magnetic field was constructed. We present a new non-destructive method to evaluate the remanent life of 1Cr-1Mo-0.25V steel using the value of reversible magnetic permeability. This method is based on the existence of reversible magnetic permeability in the differential magnetization around the coercive field strength. We measured the first harmonics voltage induced in a coil using a lock-in amplifier tuned to an exciting frequency. The Results of reversible magnetic Permeability and Wickers hardness on the aged samples show that the peak interval of reversible magnetic permeability (PIRMP) and Vickers hardness decreases as aging time increases. A softening curve is obtained from the correlation between Vickers hardness and the PIRMP. This curve can be used as a non-destructive method to evaluate the remanent life of turbine rotor steel.

• International Commerce and Information Review
• /
• v.19 no.3
• /
• pp.197-214
• /
• 2017

It requires professional knowledge and much time to judge intellectual property rights infringement. The duties of customs administration are the balance between the propositon of trade facilitation through rapid clearance and the thesis of social security through exact examination. There is a view that the criminal procedure law control is necessary to the goods inspection of clearnce procedure if it is related to crimianl investigation. However, it seems that the customs law does not consider the goods inspection investigation as the investigation under judicial control, but only the mere administrative investigation. It can be said that the inspection of goods by customs law functioning as a clue of investigation is confined to the ordinary goods inspection, including the screening test. Searching for specific articles by specific informaition should be under the control of criminal procedure law because it constitutes the commencement of criminal investigation in criminal cases. This interpretation could be an opportunity as a harmonious operation between the goods inspection of customs clearance and the search and seizure of criminal procedure.

• Korean Journal of Animal Reproduction
• /
• v.25 no.1
• /
• pp.29-33
• /
• 2001

This study was conducted to investigate the effects of various estrus synchronization and seasonal breeding in Hanwoo. Delivery interval and number of service per conception were 412.9 and 1.76 in the annual breeding and 376.59 and 1.48 in the seasonal breeding, respectively. The percentage of cows exhibiting estrus in PG $F_{2{\alpha}}$, PRID, CIDR and CnRH-PG $F_{2{\alpha}}$-GnRH were 68.1%(141/207), 71.42%(15/20), 56.8%(33/38) and 93.1%(216/232), respectively. A greater percentage of GnRH-PG $F_{ 2{\alpha}}$-GnRH treatment became pregnant(91.1%) than across all treatments(75.0%, 81.0%, 89.6%). The results show that GnRH-PG $F_{2{\alpha}}$-GnRH treatment f3r pregnant in Hanwoo seems to be more effective than the others.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.31 no.6_1
• /
• pp.447-454
• /
• 2013

The geolocation accuracy of SAR satellite imagery is affected by orbit and sensor information and external variables such as DEM accuracy and atmospheric delay. To predict geolocation accuracy of KOMPSAT-5 and KOMPSAT-6, this paper uses TerraSAR-X imagery which has similar spec. Simulation data for sensitivity analysis are generated using range equation and doppler equation with several key error sources. As a result of simulation analysis, the effect of sensor information error is larger than orbit information error. Especially, onboard electronic delay needs to be monitored periodically because this error affects geolocation accuracy of slant range direction by 30m. Additionally, DEM accuracy causes geolocation error by 20~30m in mountainous area and atmospheric delay can occur by 5m in response to atmospheric condition and incidence angle.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.35 no.6
• /
• pp.517-526
• /
• 2017

In this study, we analyzed the accuracy of elevation, slope, and area to the damage scale of the debris flow using the drones to track the details of the debris flow that method was between the digital topographical map(1/5,000) method and GPS ground survey method. The results are summarized as follows. At first, in the comparison of elevation, the value by the drones was 3.024m lower than the digital topography map, but in case of slope the average slope was $1.20^{\circ}$ and the maximum slope was $10.46^{\circ}$ which was higher by the drones image. Secondly, the difference area is $462m^2$ between on the digital topographic map and the drones image was calculated high, because it is determined by reflecting the uplift of the terrain as a point that calculated more accurate than the digital topographic map. Therefore, when compared with the existing method, the drone image method was very effective in terms of time and manpower.

• Korean Journal of Remote Sensing
• /
• v.33 no.6_2
• /
• pp.1139-1149
• /
• 2017

Measuring tree's volume is very important input data of various environmental analysis modeling However, It's difficult to use economical and equipment to measure a fragmented small green space in the city. In addition, Trees are sensitive to seasons, so we need new and easier equipment and quantification methods for measuring trees than lidar for high frequency monitoring. In particular, the tree's size in a city affect management costs, ecosystem services, safety, and so need to be managed and informed on the individual tree-based. In this study, we aim to acquire image data with UAV(Unmanned Aerial Vehicle), which can be operated at low cost and frequently, and quickly and easily quantify a single tree using SfM-MVS(Structure from Motion-Multi View Stereo), and we evaluate the impact of reducing number of images on the point density of point clouds generated from SfM-MVS and the quantification of single trees. Also, We used the Watertight model to estimate the volume of a single tree and to shape it into a 3D structure and compare it with the quantification results of 3 different type of 3D models. The results of the analysis show that UAV, SfM-MVS and solid model can quantify and shape a single tree with low cost and high time resolution easily. This study is only for a single tree, Therefore, in order to apply it to a larger scale, it is necessary to follow up research to develop it, such as convergence with various spatial information data, improvement of quantification technique and flight plan for enlarging green space.

• Journal of Korean Society of Transportation
• /
• v.32 no.4
• /
• pp.336-346
• /
• 2014

Recently interest and concern about the effectiveness of the transportation investment policy have been increasing because lots of transportation projects reflected to the National Transportation Plan are suspended or delayed during pre-feasibility study. For instance, the criticism such as overlap and deficiency in consistency in appraisal system were aroused because of the waste of budget, time and man-power etc. This is because the Korea government adopted pre-feasibility study for the purpose of efficient use of national budget, but the methodology and the appraisal contents are similar to the existing feasibility study. Also, the feasibility appraisal study was adopted in 1999 for the purpose of establishing efficient transport networks but the feasibility study has been substituting the function which should be conducted by feasibility-appraisal study. In this study, by reviewing the current situation and the purport of introducing these policies, the understanding of these policies could be increased. Then, the plans for improving the efficiency of transportation appraisal system are suggested in the context of strengthening the connectivity between these policies. This study is expected to play an important role in increasing the rationality, consistency and efficiency of transportation investment policies.

• Journal of Korea Technology Innovation Society
• /
• v.13 no.3
• /
• pp.538-557
• /
• 2010

Korean Government has supplied small-medium enterprises with various technology financing programs such as R&D grant." loans, equities, guarantees since 1980's. The purpose of this study is to render policy suggestions for policy makers by analysing problems with regard to regulations. The suggestions of this study are such as the following. First, the current three months of the fund formation period should be extended within six months for general partners to have enough time to raise funds in the current tough capital market situation. Second, the government's non priority loss devotion system should keep going to prevent general partner's moral hazard. Third, in order to fulfill the policy purpose that is to create globally well-known companies, the government investment ratio should scale up from the current 20% to 30% of the total fund size in that the stable capital supply for core technology commercialization, industrialization and globalization of companies is achieved. Finally, general partners of the New Growth Engine Fund should showoff their investment abilities to the potential investors such as institutional investors by accumulating all track records and know-hows that prove their specialities and implementing action plans to achieve the best result of their investment. This study provides general considerations of the selection procedure, the government investment ratio, the government priority loss devotion system and so on when formating the public funds.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.3
• /
• pp.155-160
• /
• 2018

The unmanned aerial vehicle (UAV) is used in various fields, such as land surveying, facility management, and disaster monitoring and restoration because it has low operational costs, fast data acquisition, and can generate a digital surface model (DSM). Recently, the UAV has been applied to process management in construction projects. Construction projects are widely distributed not only in urban areas but also in mountainous areas and rural areas where people are rarely in traffic or in vehicles. Projects range from a few hundred meters to several kilometers long. In order to perform a reconnaissance survey, a surveying method using a global positioning system (GPS) or a total station has mainly been used. However, these methods have a disadvantage in that a lot of time is required for data acquisition. This study's purpose is to evaluate the usability of a UAV DSM for surveying a construction area. Data was acquired using the UAV and a three-dimensional (3D) laser scanner, and the DSM of the construction site was created through data processing. The UAV DSM showed accuracy to within 30 cm based on the 3D laser scanner data, and a process comparison between the two work methods was able to present the usability of the UAV DSM in the field of construction surveying. Future utilization of the UAV DSM is expected to greatly improve the efficiency of work in construction projects.

• Journal of Navigation and Port Research
• /
• v.39 no.3
• /
• pp.223-231
• /
• 2015

Korea port customs surveillance of administration is operated around the 24 hours without a break in accordance with the characteristic of trade, in this specific environment, Ocean fisheries officials are performing this important duty. This research investigated various factors which might influence Korea Customs Service civil servants who are engaged in port, based on advanced researches on job satisfaction and Herzberg's two factors(motive hygene factor), and analyzed the difference in job satisfaction in respect of job satisfaction composition according to Ocean fisheries officials at port customs sociodemographic characteristics through a survey. Also, the researcher comprehended the factors of job satisfaction which have the biggest influence on the whole job satisfaction. Based on the analysis result, The researcher expects that the results of this research can contribute to customs administration's inherent goal achievement by finding out customs civil servants' job satisfaction degradation factors, who are engaged in port surveillance of administration, and properly controlling them and improving organizational members' job satisfaction.