• Aerospace Engineering and Technology
• /
• v.13 no.1
• /
• pp.86-95
• /
• 2014

For the accomplishment of satellite's own missions, complicated control procedures and commands are required. Although absolute-Time Command and Command Sequences have been applied for controlling satellite and its operation historically, these command system only has a capability to manage sequential control process and has a limitation that cannot deal with decision and branch for corresponding to the condition of the time. To resolve above limitation, KARI has designed RTCSC which is mainly based on the existing RTCS but adopts a one-byte Op Code for supporting decision making and conditional branch. This paper introduces the design and implementation of RTCSC as On-Board Control System like OBCP, VML and IP.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2005.11a
• /
• pp.289-292
• /
• 2005

Because of accumulation of operation time, the performance of main components(compressor, combustor, turbine, etc.) come to be deteriorated in gas-turbine engine. So, high reliability and minimun of expense are important problem for engine manufacturer and user in operation of gas-turbine engine. In this study, the diagnostic code of the engine performance using the thermodynamic sensitivity between the sensed parameters and the health parameters has been developed without an application of the commercial program. The single performance deterioration of the turbo-shaft engine has been estimated with this code.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.2
• /
• pp.50-57
• /
• 1995

In this paper the model was analyzed on performance evaluation for IN facility and we carried out evaluation on it's service performance using this model as an example. We used simulation method and operation analysis method as evaluation technology. As the evaluation results, the case of simulation method was nearly consistent with the case of the operation analysis method and the user-network interaction time had more effect on service performance than delay time of IN facility. We expects that the performance models proposed in this paper is useful when operating, managing and designing IN services in considering service performance.

• Journal of Navigation and Port Research
• /
• v.48 no.3
• /
• pp.214-220
• /
• 2024

Remote control is used for operating maritime autonomous surface ships. The operator controls the ship using control data generated by the remote control system. To ensure successful remote control, three principles must be followed: safety, reliability, and availability. To achieve this, the suitability of both the control data and operators for remote control must be established. Currently, there are no international regulations in place for evaluating remote control suitability through experiments on actual ships. Conducting such experiments is dangerous, costly, and time-consuming. The goal of this study is to develop a suitability evaluation method using the output values of control devices used in actual ship operation. The proposed method involves evaluating the suitability of data by analyzing the output values and evaluating the suitability of operators by examining their tracking of these output values. The experiment was conducted using a shore-based remote control system to operate the training ship 'Hannara' of Korea National Maritime and Ocean University. The experiment involved an iterative process of obtaining the operator's tracking value for the output value of the ship's control devices and transmitting and receiving tracking data between the ship and the shore. The evaluation results showed that the transmission and reception performance of control data was suitable for remote operation. However, the operator's tracking performance revealed a need for further education and training. Therefore, the proposed evaluation method can be applied to assess the suitability and analyze both the control data and the operator's compliance with the three principles of remote control.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.107-110
• /
• 2000

화학 박막 증착용(CVD : Chemical Vapor Deposition) 클러스터 장비는 다양한 공정 경로가 가능하며 물류 흐름이 매우 복잡해질 수 있다. 또한, 공정이 종료된 웨이퍼는 제한 시간 내에 챔버에서 꺼내져야만 한다. 클러스터 장비는 두 개의 팔을 가진 로봇이며, 빈 쪽 팔을 이용하여 공정이 종료된 웨이퍼를 꺼낸 후, 다른 쪽 팔을 이용하여 이전 공정에서 가져온 웨이퍼를 해당 공정에 넣어 주는 스왑(SWAP) 방식으로 운영된다. 이러한 스왑 방식에서는 로봇 작업 순서가 결정되어 진다. 그러나, 로봇의 팔 이외에 임시버퍼가 없고, 각 챔버는 엄격한 체제 시간 제약(Residency Time Constraint)을 가지고 있기 때문에 로봇의 작업 시점의 제어가 필요하다. 본 논문에서는 간단한 Earliest Starting 방식으로 로봇의 작업 시점을 제어한다고 가정했을 때, 스왑 방식을 운용하면서 체제 시간 제약을 만족하는 공정 시간들의 조건을 제시한다. 공정 시간은 엔지니어에 의해 다소 조정이 가능하므로 공정 시간들의 조건은 엔지니어에게 스케줄 가능한 공정 시간을 결정할 수 있도록 지원해 주는 시스템에 활용 가능하다. 또한, 본 논문에서는 FSM(Finite State Machine)을 이용하여 CTC(Cluster Tool Controller) 내부의 실시간 스케줄러 구현 방법을 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.11
• /
• pp.1050-1057
• /
• 2012

Super Wi-Fi is a newly emerging wireless Internet technology, which constitutes Wi-Fi networks using TV white space. A key technical challenge in the Super Wi-Fi applications is how to provide a seamless Internet service even when a Super WiFi user should give up the channel in use to the active incumbent user which is activated in the same service area, preventing from the service continuity in Super Wi-Fi. In this paper, we propose a channel handover method to support service continuity of Super Wi-Fi, in which an AP selects a new operational channel and provides the channel information for MSs. Therefore, the AP and the MSs can carry out seamless handover for Super Wi-Fi service. A performance evaluation shows that the proposed scheme is superior to the conventional Wi-Fi in channel mobility delay.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.708-711
• /
• 2011

The Navy is in the process of developing a sonar-operation strategy to increase the effectiveness of underwater target seeking capability. HMS is the basic strategy to detect underwater targets. The advantages of HMS is that, it has a short preparation time to operate and can be always used regardless of sea conditions and weather. However, it is difficult to effectively detect underwater targets due to the interaction between marine environments and sonar-operations. During the research, the effectiveness of the HMS system's underwater target seeking capability was analyzed by integrating various search patterns and environment conditions into the simulation. In the simulation the ship target an evasive target within a set region. The simulation presented results for an effective searching methods of underwater targets. These research results can be used as foundation for advancing and improving the sonar operational tactics.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.19 no.2
• /
• pp.65-72
• /
• 2015

Performance tests of a turbopump for the developing 7-tonf liquid rocket engine were conducted. The performance of turbopump components and their power matching were measured and examined firstly under the LN2 and water environment. In the real propellant(LOX and kerosene) environment tests, design and off-design performances of turbopump were fully verified. During the off-design tests, turbopump running time was set the same as engine operating time and pump inlet pressure were set lower than nominal operating value in order to investigate pump suction capability. It have been verified that subject turbopump satisfies required performance - flow rate, head, suction performance and operational time - in the operating regime of developing liquid rocket engine.

• Journal of the military operations research society of Korea
• /
• v.36 no.1
• /
• pp.15-27
• /
• 2010

Fire sequencing problem is to find a sequence of firing on the targets. The latest, because the korea artillery force is inferior in number as compared with north korea force. It is an important question to give a fatal damage to the enemy force by using prompt and accurate fire in order to overcome the lack of artillery force. Minimizing the fire finishing time will secure the adapt ability in tactical operation. In this paper, we developed a mathematical model to do allocation the fire on the targets to decrease to total fire operation time. In order to work out the fire sequencing problem, MIP is developed and the optimum solution is obtained by using ILOG OPL. If this analytical model is applied to the field artillery unit, it will improve the artillery fire force enhancement.

• Journal of the Korea Society of Computer and Information
• /
• v.29 no.1
• /
• pp.131-138
• /
• 2024

The ability of Combat Management System(CMS) to respond quickly and accurately to threat to a naval vessel is directly related to the survivability and combat power of the vessel. However, current method for detecting enemy submarine periscope in CMS rely on manual and subjective method that require operators to manually verify and analyze information received from sensor. This delays the response time to the threat, making the vessel less viable. This paper introduces a periscope detection algorithm that classifies the plot information generated by High Resolution Range Profile(HRRP) into probability-based suspicion classes and dramatically reduces threat response time through classified notifications. Algorithm validation showed 133.3791 × 10⁶ times faster and 12.78%p higher detection rate than operator, confirming the potential for reduces threat response time to increase vessel survivability.