• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.10a
• /
• pp.41.1-41.1
• /
• 2011

본 연구에서는 MOCVD법으로 사파이어 기판위에 u-GaN를 성장한 후 Mg을 도핑시켜 p-GaN를 성장하고, RF 스퍼터를 이용하여 n-ZnO를 도포하여 n-ZnO/p-GaN 이종접합을 형성한 후 진공증착기를 이용하여 Au/Ni를 증착시켜 발광다이오드(LED)를 제작하고 전기 광학적 특성을 조사하였다. 두께가 500 nm인 u-GaN 위에 성장된 p-GaN의 운반자 농도는 $1.68{\times}10^{17}\;cm^{-3}$ 이었다. 그리고 150, 300 nm 두께의 p-GaN에 대하여 측정된 DXRD 반치폭은 각각 450 arcsec, 396 arcsec 이었고, 상온에서 2.8~3.0 eV 영역에서 Mg 억셉터와 관련된 광루미네센스가 검출되었다. RF 스퍼터링에 의해 0.7 nm/min의 속도로 증착된 n-ZnO 박막은 증착 두께에 따라 비저항이 27.7 $m{\Omega}{\cdot}cm$ 에서 6.85 $m{\Omega}{\cdot}cm$ 까지 감소하였다. 그리고 n-ZnO 박막은 (0002)면으로 우선 배향되었으며, 상온에서 에너지갭 관련된 광루미네센스가 3.25 eV 부근에서 주되게 검출되었다. n-ZnO/p-GaN 이종접합 LED의 전류전압 특성곡선은 다이오드 방정식에 만족하는 특성을 나타내었다. 다이오드 지수는 3 V 이하 영역에서 1.64, 3~5 V 영역에서 0.85이었다. 그리고 5 V 이상 영역에서 공간전하의 제한을 받았으며, 다이오드 지수는 3.36이었다. 한편, 역방향 전류전압 특성은 p-GaN 박막의 두께에 영향을 받았으며, p-GaN 박막의 두께가 150, 300 nm 일 때 각각의 누설 전류는 $1.3{\times}10^{-3}$ mA와 $8.6{\times}10^{-5}$ mA 이었다. 상온에서 측정된 EL 스펙트럼의 주된 발광피크는 430 nm이었고, 반치폭은 49.5 nm이었다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.3 no.2
• /
• pp.135-148
• /
• 2005

In the stage of conceptual design for the construction and operation of the geologic repository for radioactive wastes, it is important to consider a repository ventilation system which serves the repository working environment, hygiene & safety of the public at large, and will allow safe maintenance like moisture content elimination in repository for the duration of the repositories life, construction/operation/closure, also allowing safe waste transportation and emplacement. This paper describes the possible ventilation system design criteria and requirements for the prospective Korean radioactive waste repositories with emphasis on the underground rock cavity disposal method in the both cases of low & medium-level and high-level wastes. It was found that the most important concept is separate ventilation systems for the construction (development) and waste emplacement (storage) activities. In addition, ventilation network system modeling, natural ventilation, ventilation monitoring systems & real time ventilation simulation, and fire simulation & emergency system in the repository are briefly discussed.

• KSBB Journal
• /
• v.10 no.2
• /
• pp.126-130
• /
• 1995

A membrane gas sensor was developed for the measurement of ethanol concentration during acetic acid fermentation. The fermentation broth including ethanol was permeated through the silicone membrane by synthetic air as a carrier gas and was detected by a semiconductor gas sensor. The optimum conditions of membrane gas sensor were 20m1/min of flow rate and 0.5mm of membrane thickness. In acetic acid fermentation, an on-line measurement of ethanol concentration was conducted by the proposed membrane gas sensor and then the on-line sensor signal, was compared with the result of off-line analysis by gas chromatography. As a result, a correlated response over the range of $0∼70g/\ell$ was shown between membrane gas sensor and gas chromatography and this use of membrane gas sensor was experimentally ascertained for the monitoring and control of bioprocess like acetic acid fermentation.

• Journal of the Korea Concrete Institute
• /
• v.19 no.4
• /
• pp.433-439
• /
• 2007

The main objective of the paper is to investigate the static behavior of a prestressed concrete (PSC) girder that has been spliced with precast box segments. A 20 m long full-scale spliced PSC girder is fabricated and tested to compare its static performance against a monolithic girder. The monolithic girder has the same geometric and material properties with respect to the spliced girder. This includes infernal strain, deflections, neutral axis position, and crack patterns for both girders. The test also consists of monitoring relative displacements occurring across the joints. Both the horizontal displacement (gap) and vertical displacement (sliding) are measured throughout the loading procedure. All results have been compared to those obtained from the monolithic girder. It has been demonstrated that the spliced girder offers close behavior with respect to the monolithic girder up to the crack load. Both girders exhibits ductile flexural failure rather than abrupt shear failure at joints.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.6
• /
• pp.1462-1468
• /
• 2014

Xe gas is moved to target from GPM. It is used to feasible nuclear reaction from proton of 30MeV cyclotron being investigated by the Xe-124 gas target system. This system is divided into four parts. The hardware system was constructed by solidworks 3-D CAD and Helium supply is to cool the Havor foil. The Cooling water has the job of cooling down the temperature when Xe gas is being investigated in the target. Temperature and pressure gauges are attached to be checked easily. GPM has the part that prepares to transport Xe gas. There are storage vessel that stores Xe gas, the cold trap that filters humidity and impurity and lastly storage vessel that temporarily stores Xe gas. HCS using the helium is to clean and cool for each part. These parts are configured with SIEMENS PLC and PcVue monitoring program for more comfortable and easy maintenance.

• Resources Recycling
• /
• v.29 no.4
• /
• pp.45-50
• /
• 2020

Producer and distributor of electrical and electronic equipment may directly collect waste electrical and electronic equipment that falls under the class to which the equipment they distributed belongs, or may join KERC(Korea Electronic Recycling Cooperative) and have KERC fulfill the duty to collect on behalf. In this study, the system of calculating the financial contributions is reviewed, and then the defined problems and improvement plan are proposed. First, the standard operation and time should be set for collection and transportation costs, taking into account the operation by collection type. Second, since there is a difference in the screening method of the recycling center, the standard cost for the allocation factor should be set by reflecting the difference in these methods and the characteristics of the product line being processed. Third, it is necessary to secure a budget of sufficient size by determining the median or average value rather than the minimum value in the forecast model for visit collection. This study is suggesting in that it examines the problems of the allotted contributions paid by the mutual aid members to KERC and suggests ways to improve them.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.11
• /
• pp.1954-1960
• /
• 2008

Modem Robot is used in all industries. Previous Robot was used by simplicity work, at recent times, robot is developed in form that can do action such as a person. Robot's action runs according to command repeat or in the every moment according to sensor's output value, achieve other action. In this raper, we studied about self-regulation transfer robot that follow Object autonomously. This robot can be used by purpose that carry heavy burden instead of human. Robot's composition is drive part which run object's position awareness Sensor, Processor that control action and Motor part. After robot is connects with Network, we did robot remote control and monitor the action situation of robot. For the methode to reduce drive error, we developed algorithm for outside environment. For an experiment we made the self-regulation robot. We showed the directivity of sensor, error of directivity and soft moving of robot. We showed the monitoring system and the execution screen for communication between robot and PC.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.423-423
• /
• 2018

전세계적으로 집중호우, 홍수, 가뭄 등 기상이변이 빈번히 발생하고 있으며, 홍수기와 갈수기가 뚜렷해지고, 이에 따라 수자원 확보에 애로사항이 발생하고 있다. 이를 해결하기 위하여 정부는 "물의 재이용촉진 및 지원에 관한 법률"을 재정하여 효율적인 빗물 관리에 주력을 하고 있으나, 체계적인 빗물관리는 미흡한 실정이다. 즉 수자원을 효율적으로 보관하고 관리할 시스템 구축이 필요하다. 본 연구에서는 재배 작물에 대한 농업용수 확보를 위한 빗물저류조를 시공 및 모니터링을 하기 위하여 먼저 보은군 회인면 오동리의 기상 및 수문특성 조사를 실시하였고, 확률강우량을 산정하기 위해 보은기상관측소의 지속기간별 강우 자료를 수집하여 확률분포를 선정하고 매개변수를 산정하였다. 이에 따른 적합도 검정 결과 최적 확률분포형을 산정하였다. 분석한 결과를 통해 대상지역의 집수되는 면적에 내리는 유출량을 산정하였으며, 집수되는 유형은 지붕으로서 그에 대한 면적은 $120.0m^2$로 측정되었고, 지붕에 대한 유출계수로서 0.9의 값을 적용하였다. 지붕에서 집수되는 유출량의 값을 산정하였으며, 6월의 50년 빈도에서 부족한 9.4톤은 집수된 유출량으로 보충할 수 있는 것으로 판단된다. 따라서 50년 빈도의 10톤을 저류할 빗물은 저류조에서 30%의 여유율을 두어 13톤으로 저류조를 설계하는 것이 적정할 것으로 판단된다. 현재 빗물자원의 대부분은 바다로 유입되어 소모되거나, 하수로 유입되어 불필요한 고도처리공정이 진행되고, 하수처리장 용량에 과부하를 발생시키는 등 막대한 예산이 투입되고 있다. 갈수기시 농가에서 용수를 확보하기 위한 용수 운반장치 등 기반구축과 인력 부족으로 정상적인 용수공급의 어려움을 해결하기 위해서는 빗물자원을 용수로서 효율적으로 활용하기 위한 시스템의 구축이 필요할 것으로 사료된다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.12 no.2
• /
• pp.135-145
• /
• 2002

Active networks represent a new approach to network architecture. Nodes(routers, switches, etc.) can perform computations on user data, while packets can carry programs to be executed on nodes and potentially change the state of them. While active networks provide a flexible network iufrastructure, they are more complex than traditional networks and raise considerable security problems. Nodes are Public resources and are essential to the proper and contract running of many important systems. Therefore, security requirements placed upon the computational environment where the code of packets will be executed must be very strict. Trends of research for active network security are divided into two categories: securing active nodes and securing active packets. For example, packet authentication or monitoring/control methods are for securing active node, but some cryptographic techniques are for the latter. This paper is for transferring active packets securely between active nodes. We propose a new method that can transfer active packets to neighboring active nodes securely, and execute executable code included in those packets in each active node. We use both public key cryptosystem and symmetric key cryptosystem in our scheme

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.9
• /
• pp.259-269
• /
• 2017

As emerging the '4th Industrial Revolution' by increasing the necessity of the intelligent system recently, 'Autonomic Control System' also has been the important issue. It is necessary to develop the system collecting data of machines and sensors for the autonomic control system to monitor the target system. But it is difficult to collect data because data formats of machines and sensors of the existing factories differ between each manufacturer. Therefore, this paper presents and implements data collecting and processing system that comprise 3 steps including 'ParseBuffer', 'ProcessData' and 'AddToBuffer' by using 'MTConnect' that is standard manufacturing facility data collecting middleware. Through the suggested system, we can get data in a common format usable in an autonomous control system. As a case study, we experimented with the generation and collection of AGV (Automated Guided Vehicle) data, which is an unattended transportation system in the factory. To accomplish this, we defined the data type in accordance with the MTConnect standard and confirmed the data collected through the proposed system.