• The Journal of Engineering Geology
• /
• v.8 no.2
• /
• pp.175-188
• /
• 1998

This paper describes the internal structures and K-Ar ages of fault gouges collected from the Dongnae fault zone. This fault zone is internally zoned and occurs in the multiple fault cores. A fault core consists of thin gouge and narrow cataclastic zones that are bounded by a much thicker damage zone. Intensity of deformation and alteration increases from damage zone through cataclastic zone to gouge zone. It is thought that cataclasis of brittle deformation was the dominant strain-accomodation mechanism in the early stage of deformation to form the gouge zone and that crushed materials in the regions of maximum localization of fault slip subsequently moved by cataclastic flow. Deformation mechanism drastically changed from brittle processes to fluid-assisted flow along the gouge zone as the high porosity and permeability of pulverzied materials during faulting facilitated the influx of the hydrothermal fluids. Subsequently, the fluids reacted with gouge materials to form clay minerals. Fracturing and alteration could have repeatedly taken place in the gouge zone by elevated fluid pressures generated from the reduction of pore volume due to the formation of clay minerals and precipitation of other materials. XRD analysis revealed that the most common clay minerals of the gouge zones are illite and smectite with minor zeolite and kaolinite. Most of illites are composed of 1Md polytype, indicating the products of hydrothermal alteration. The major activities of the Dongnae fault can be divided into two periods based upon K-Ar age data of the fault gouges : 51.4∼57.5Ma and 40.3∼43.6Ma. Judging from the enviromental condition of clay mineral formation, it is inferred that the hydrothermal alteration of older period occured at higher temperature than that of younger period.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.5
• /
• pp.692-699
• /
• 2017

The purpose of this study is to investigate the display fatigue quantitatively when operating 2D and HMD-based 3D VR bicycles. Though it is generally accepted that the display fatigue induced by 3D VR is greater than that induced by 2D VR, there have been few studies which attempted to measure the display fatigue scientifically. The subjective degree of cybersickness and quantitative flicker fusion frequency (FFF) were measured in twenty subjects (Male 10, Female 10) before and after they operated 2D and 3D VR bicycles for 5 min. Two dependent variables affected by the 2D and 3D VR displays were analyzed and compared statistically based on scientific evidence and research. This study showed that 3D VR resulted in a significantly higher cybersickness rate and a significant lower FFF rate than 2D VR. Given the current propensity to couple VR techniques with exercise equipment, it seems appropriate to verify the general beliefs through scientific methods and experimental measures such as the FFF and cybersickness questionnaires.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1997.04a
• /
• pp.283-287
• /
• 1997

공작기계의 가공정도는 공작기계의 운동기구가 가지고 있는 기하오차와 절작작업시 발생하는 진동, 열,절삭력에 의해서 공작기계의 구조계,주축계,이송계의 변형에 의해서 직접적인 영향을 받는다. 또 가공정도는 제품의 정밀도 및 품질에 직접적인 영향을 미치기 때문에 가공정도를 향상시키기 위한 방법으로 공작기계의 오차를 측정/해석하는 방법이 연구되고 있다. 일반적으로,공작기계의 오차는 Quasi-static 오차와 Dynamic오차로 구분할수 있다. Dynamic 오차는 기계의 진동,채터 및 스핀들의 진동에 의해서만 발생하는 오차이며,Quasi-static 오차는 공작기계 구성요소인 안내면,칼럼,볼스크류등의 기하오차와 온도변화에 의한 열변형오차에 의해서 발생한다. 특히,공작기계 및 절삭가공중에 발생하는 열원에 의한 열변형 오차는 공작기계의 기하오차에 비해서 가공정도에 큰 영향을 미치며[1,2],발생오차의 약 40~70% 정도가열변형 오차에 기인한 것으로 알려져 있다[1]. 실제 많은 실험결과를 볼 때 CNC공작기계이 경우는 열변형에 의한 오차는 기하오차에 비해서 매우 크게 나타났다. 이러한 열변형 오차는 공작기계 주위 온도와 공작기계 구성요소(칼럼,이송유니크,스핀들유니트)의 비선형적인 온도 특성에 의해서 주로 발생하고, Time-variant특성을 가지고 있기 때문에 작업중에 발생하는 온도특성에 따른 열변형 오차를 최소화 할 수 있는 방법이 필요하다. 스핀들유니트는 냉각방식을 사용하여 온도변화를 줄이고 있으나 반복적인 작업과 스핀들의 고속회전으로 인해서 복합 적인 온도변화를 발생시킨다. 또, 볼스크류의 지지방식이 양쪽 고정단 형태이기 때문에 조립시 예압(pre-load)을 주어서 열팽창을 보상하고 있으나 공작기계의 반복적인 이송으로 인해서 발생하는 온도변화에 의한 열오차를 보상하는데는 어려움이 있다.됩니다. 생리적 저항력이 없는 어린이들은 이러한 공해와 생활조건의 제일희생자가 되는 것입니다. 엄마들이 "얘는 감기, 비염, 편도선을 달고 삽니다...." "얘는 코감기, 목감기 번갈아 가면서 하도 앓고 있어서 양약율 중지하고 현재 한약을 먹고 있습니다." 이러한 역경은 극복할 수 있는가\ulcorner 질병의 메카니즘은 어떻게 작용되는가\ulcorner 등등을 육미회 센타에서 체험한 사례를 가지고 말씀드리고자 합니다..ell layer (PCL)와 glia에 SOD-1이 강하게 염색되었다. APT 병용 투여로 상당수의 경련이 일어나지 않은 흰쥐는 해마의 DG에 FRA가 경미하게 염색되었고, PCL에 SOD-1도 경미하게 나타났으나, 경련이 나타난 쥐에서는 KA만을 투여한 흰쥐와 구별되지 않았다. 이상의 APT의 항산화 효과는 KA로 인한 뇌세포 변성 개선에 중요한 인자로 작용할 것으로 사료되나, 보다 명확한 APT의 기전을 검색하고 직접 임상에 응응하기 위하여는 보다 다양한 실험 조건이 보완되어야 찰 것으로 생각된다. 항우울약들의 항혈소판작용은 PKC-기질인 41-43 kD와 20 kD의 인산화를 억제함에 기인되는 것으로 사료된다.다. 것으로 사료된다.다.바와 같이 MCl에서 작은 Dv 값을 갖는데, 이것은 CdCl$_{4}$$^{2-}$ 착이온을 형성하거나 ZnCl$_{4}$$^{2-}$ , ZnCl$_{3}$$^{-}$같은 이온과 MgCl$^{+}$, MgCl$_{2}$같은 이온종을 형성하기 때문인것 같다. 한편 어떠한 용리액에서던지 NH$_{4}$$^{+}$의 경우 Dv값이 제일 작았다. 바. 본 연구

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.391-400
• /
• 2017

The purpose of this paper is to present the effect of image stimulation on body stability as a conceptual model and to investigate the effect of image stimulus(2D, VR) on body stability(hand stability) through experiments Recently, stereoscopic images such as virtual and augmented reality are combined with smart phones and exercise equipments, and the diffusion is becoming active. The possibility of a safety accident or human error is also increasing as it temporarily affects the balance of the body and hand stability after the image stimulus is removed. The conceptual model is presented based on the results of previous studies. Based on the experimental results, the conceptual model has been explained in combination with the human information processing process and cognitive resource models that take place in the brain. Twenty subjects were exposed to 2D and VR stimuli, and display fatigue was measured by cybersickness questionnaire and hand stability by hand steadiness tester. Experimental results show that VR images induce higher display fatigue and lower hand stability than 2D. In this study, it is meaningful that hand stability according to image type and display fatigue level which have not been tried yet is revealed through conceptual model and experiment.

• Journal of The Korean Association For Science Education
• /
• v.18 no.4
• /
• pp.473-483
• /
• 1998

A learner's cognitive conflict with his /her existing conception is regarded to be one of the most important factors for a conceptual change. In this study, the effects of the conflict situation types on inducing students' cognitive conflicts in Newton's law were examined. The thirty-four students of 10th grade were selected from a rural high school based on the result of pre-test. The two different types of conflict situations among many possible types were used in this study. One type was using logical conflict situation and the other was demonstrating real conflict situation. The levels of cognitive conflict were measured by 4-point Likert scale by three interviewers. As the results, the demonstration method was more effective than the logical argument method. In case of the logical argument method, rather than showing scientific conceptions, suggesting another misconception was more effective to the students who have misconception. However, logical argument method was not effective to those who have scientfic conceptions. To the students who have unscientific conceptions, the demonstration method was very effective for inducing cognitive conflict. From the results of this study, demonstration method of teaching seems to be very effective for inducing students' cognitive conflict and overcoming their misconceptions on scientific concept.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.531-536
• /
• 2004

In fracture treatment with external fixators, the inter-fragmentary movements at the fracture site affect the fracture healing process, and these movements are highly related to the stiffness of external fixation systems. Therefore, in order to provide the optimal fracture healing at the fracture site, it is essential to understand the relationship between the stiffness and the system configurations in external fixation system. In this study we investigated the influences of system configuration parameters on the stiffness in the finite element analysis of an external fixation system of a long bone. The system alignment, the geometric and the material non-linearity of the pin, the joint stiffness and the callus formation were considered in the finite element model. In the first, the system stiffness of the developed finite element model was compared with the experiment data for model validation. The consideration of the joint stiffness and nonlinearity of the model improved the system stiffness results. The joint stiffness, the non-alignment of the system decreased the system stiffness while the callus formation increased the system stiffness. The present results provided the biomechanical basis of rational guidelines for design improvements of external fixators and pre-op. planning to maximize the system stiffness in fracture surgery.

• Journal of Korean Physical Therapy Science
• /
• v.31 no.1
• /
• pp.16-32
• /
• 2024

Background: Exercise equipments and assistive devices for the disabled are being developed, but improvements for usability are still needed. The purpose of this study was to improve and utilize the developed exercise equipment and assistance devices by conducting usability test for people with spinal cord injury. Design: Cross-sectional Study. Methods: Scenarios and usability indicators were derived by conducting a preliminary usability test, 5 non-disabled men and women aged 19 or older. In the scenario, a total of 9 tasks were sequentially performed, including 2 tasks of entry and exit, 5 tasks of assistance devices and weight stack adjustment, and 2 tasks of pre exercise and exercise. The usability indicators were task success (success or fail), execution time (sec), safety, and convenience. For safety, 7 questions (Likert scale, 1~5 point) related to safety, stability and hazard were derived, and for convenience, the system usability scale (SUS score) was used (range: 0~100, 50 percentile rank is 68 point). Results: As a result of the usability test of people with spinal cord injury, there was a large variation among subjects in the task of adjusting the position of the pulley and support in the execution time (11.64~25.44 seconds), and one person failed to adjust the pulley. The safety level showed a lower score (score = 3 points) than other items in the item of entrapment or skin pressure, and in the case of SUS, the average score was 64.5 points, which was close to the acceptable level. Conclusion: Through the usability test, it was confirmed that exercise equipment for the disabled needs improvement in operability, pinching, and pressure, and that it is necessary to develop an assistive device that provides unrestrained posture information (biofeedback) to maintain correct posture during exercise.

• Industry Promotion Research
• /
• v.5 no.4
• /
• pp.91-100
• /
• 2020

In the U.S.A. from the late 19th to the early 20th century, the big business system emerged surpassing the British Empire economy. Such growth resulted from the realization of the "American-productive mode' being derived from the continuous immigrants inflow, renovative development of transportation, national markets formation and R&D of the science·technology. During 10 years after 1895, American economy was prevalent with the combination trends by the vertical or horizontal integration and these both mixed systems. As such big business was recognized, the American domestic citizens expressed the strong doubt to the revolutionary change and its public benefits and inaugurated the anti-big business campaign with deep concern that the American traditional symbol 'land of the wealth and opportunity' would be threatened. Although the governmental organizations controlling big business were established and the control laws were enforced, the American society accepted the new economic order. This situation resulted from the American economic prosperity, material affluence and managerialism of the big business.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.15 no.1
• /
• pp.252-261
• /
• 1991

A particle trajectory model to simulate two-phase particle-laden crossjets into two-dimensional horizontal free stream has been developed to study the variations of the jet trajectories and velocity variations of the gaseous and the particulate phases. The following conclusions may be drawn from the predicted results, which are in agreement with experimental observations. The penetration of the two-phase jet in a crossflow is greater than that of the single-phase jet. The penetration of particles into the free stream increases with increasing particle size, solids-gas loading ratio and carrier gas to free stream velocity ratio at the jet exit. When the particle size is large, the solid particles separate from the carrier gas , while the particles are completely suspended in the carrier gas for the case of small size particles. As the particle to carrier gas velocity ratio at the jet exit is less than unity, the particles in the vicinity of the jet exit are accelerated by the carrier gas. As the injection angle is increased, the difference of the particle trajectory from that of the pure gas becomes larger. Therefore, it can be concluded that the velocities and trajectories of the particle-laden jets in a crossflow change depending on the solids-gas loading ratio, particle size, carrier gas to free stream velocity ratio and particle to gas velocity ratio at the jet exit.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.26 no.4
• /
• pp.353-359
• /
• 1990

Chinhae Bay, included small ports, is the region which the red tide phenomenon is occurred frequently in summer season. Field sampling of 4 cross-sections in the bay resulted in detailed informations on cross-sectional velocity distributions, salt concentrations and discharge during one consecutive tidal cycle in summer season, 1983. High velocity cores reoccur two times a semi-diurnal tidal cycle at the same cross-sectional location, lower layer, in Kadok Channel during the spring tide. The tidal exchange ratio was estimated by Eulerian method. The range of exchange ratios in central Kadok Channel are 9.3-17% at the spring tide and 16.9-21.8% at the neap tide. On the other hand, its range in Masan bay-mouth is 8.7% at the spring tide and 2.0% neap tide, respectively.