• Proceedings of the Korea Technology Innovation Society Conference
• /
• 2005.10a
• /
• pp.619-636
• /
• 2005

기술의 복합성이 증가하고 제품의 존속 수명주기가 불확실해지면서 기술개발자가 의도하는 바와는 관계없이 사업 영역과 기술기반의 변하고 있다. 이러한 환경 속에서 산업 내 기술의 특성을 분석하는 이른바 산업기술분석 역할은 매우 중요하다. 그러나 그 범위가 매우 광범위하고 그 중 기술개발에 있어 관련된 산업기술분석의 프레임이 구체적으로 적용된 사례를 제한적이다. 따라서 다양한 산업을 지원하는 정부 기술개발 기회의 경우, 반도체에 적용되는 모듈러 기반 기술개발 틀과 성과분석이 항공기, 지능형 로봇과 같은 복합 시스템 산업에 그대로 적용해왔던 것이 현실이다. 이는 기술을 제품화함에 있어 필수적인 개발시스템의 기술적 속성이 산업기술 분석 방법론에 효과적으로 체화되지 못했기 때문이다 본 연구는 시스템과 서브 부품으로 구성되는 제품설계 특성을 구조화한 제품 아키텍쳐 이론을 소개하고 이를 기술개발체계에 적용하는 실증적 연구를 수행한다. 실증적 분석을 위해 항공기 개발 전 과정을 분해하고 아키텍쳐 분석방법을 실제 적용하였다. 아키텍쳐는 대표적으로 모듈 형(Module)과 인테그랄 형(Integral)으로 구분한다. 실제로 한 가지의 제품 안에도 모듈형 부품과 인테그랄 형 부품이 복합적으로 혼합되어 있는 경우가 많다. 또한, 제품을 어느 레벨까지 분해할 지에 따라 모듈화의 정도도 달라 질 수 있다. 본 연구는 아키텍쳐 중 Integral 속성의 정도를 파악하여 아키텍쳐 정도를 파악하였다. 측정 기준으로 첫째, 타 부품과의 기능적인 상호연관성과 둘째, 체계종합 설계와의 상호의존성 두 가지를 설정하였다. 이러한 두 가지 아키텍쳐 기준을 547개의 항공우주 부품 및 기술을 적용해 본 결과, 항공기 개발과정은 총 $65\%$의 인테그럴 속성을 가지고 있으며 기술분야 별로 아키텍쳐 정도가 다르게 나타나고 있었다(전자 부품은 분야는 오히려 모듈형에 가까웠음). 비단 항공기 개발과정 뿐만 아니라 다른 산업, 제품에도 적용될 수 있는 틀을 마련함으로써, 기존 연구개발기회에서 산업기술 분석을 통한 체계적 기획으로 전환할 수 있는 새로운 대안을 제시한다. 결과적으로 산업기술의 특성과 구조를 반영한 기술개발 방법론으로 아키텍쳐 이론을 적용할 수 있는 단초를 마련했으며, 이것은 본 논문이 기대하는 바이기도 하다.

• Journal of Aerospace System Engineering
• /
• v.18 no.3
• /
• pp.70-75
• /
• 2024

The insulation performance of a common bulkhead propellant tank for small launch vehicles with variations in insulation thickness was analyzed. The common bulkhead propellant tank composed of a single part allows for lightweight design, as it eliminates the need for tank connections. However, problems such as propellant loss and ignition delay due to heat transfer caused by temperature differences between oxidizer and fuel may arise. Therefore, it is essential to verify the insulation performance of the common bulkhead structure that separates the oxidizer tank and fuel tank. In this study, transient heat transfer analysis was conducted for propellant tanks with insulation thicknesses of (50, 55, 60, 65, and 70) mm to analyze the insulation performance using boil-off mass. Subsequently, the boil-off mass of the oxidizer generated during the first-stage flight time of the propellant tank was determined. The results confirmed that increasing the insulation thickness reduces the boil-off mass, thereby improving the insulation performance.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.6
• /
• pp.473-480
• /
• 2021

In this paper, We analyze and present improvements to problems in software quality through Static Analysis for Open Source, which is widely used as the Flight Controller software for small unmanned aerial vehicle drones. MISRA coding rules, which are widely applied based on software quality, have been selected. Static analysis tools were used by LDRA tools certified international tools used in all industries, including automobiles, railways, nuclear power and healthcare, as well as aviation. We have identified some safety-threatening problems across the quality of the software, such as structure of open source modules, analysis of usage data, compliance with coding rules, and quality indicators (complexity and testability), and have presented improvements.

• Journal of Aerospace System Engineering
• /
• v.17 no.4
• /
• pp.95-103
• /
• 2023

Aircraft engine parts repair is a field belonging to the lowest level in the hierarchy of the aircraft industry, and it is marginalized in terms of research, compared to aircraft manufacturing or maintenance that belong to the upper level. On the other hand, in 2019, Korean Air's Powerplant Maintenance Center paid USD $130 million to foreign countries for engine parts repair, making it an industry with great need for localization. To achieve the goal of localizing engine parts repair, a certification system is needed that can perform independent repairs based on the development of repair technology, aligning contractual relationships with engine manufacturers, and free from dependence on engine manufacturers or foreign repair companies. The purpose of this study is to provide a basis for subsequent research to secure an actual certification system by suggesting the need for securing such a certification system.

• Composites Research
• /
• v.22 no.3
• /
• pp.60-65
• /
• 2009

The mechanical behavior of carbon fiber reinforced polymeric (CFRP) composites was investigated. Both strength and modulus were measured at room temperature dry, cold temperature dry, $-55^{\circ}C$, and elevated temperature wet, $82.2^{\circ}C$ on seven different laminate configurations consisting of $[0_6]_T$, $[90_{12}]_T$, $[0_{16}]_T$ and $[90_{16}]_T$ unidirectional laminates, $[{\pm}45]_{5S}$ angle-ply laminate, $[0/90_{12}/0]_T$ cross-ply laminate, a 36-ply laminate $[0/45/-45/45/-45/0]_{3S}$. Based on the experimental data presented, it is shown that the strength at cold temperature dry, $-55^{\circ}C$ is increased with the brittleness of fiber or matrix. Moreover, it is shown that both shear strength and modulus at elevated temperature wet, $82.2^{\circ}C$ are decreased by the cause of interfacial deterioration between fiber and matrix with moisture absorption.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.10
• /
• pp.875-887
• /
• 2015

The optimal layout design is used in the development of various areas of industry. In the field of space systems, components must be placed properly in the limited space of spacecraft by considering mechanical, thermal and electrical interfaces. When applying optimal layout design, a proper, even ideal placement of components is possible in the limited space of a satellite platform. Through the optimal placement design, the minimized moment of inertia enhances efficient attitude control, rapid maneuver and mission performance of the satellite. This paper proposes 3D optimal layout design that minimizes the spacecraft's moment of inertia and effect of thermal dissipation between inner components as well as interference between inner components based on a cubic-structure satellite platform. This study proposes the new genetic algorithm for 3D optimal layout design of the satellite platform.

• Journal of Aerospace System Engineering
• /
• v.13 no.5
• /
• pp.79-86
• /
• 2019

An anti-collision light of a rotary-wing aircraft is used for the purpose of preventing collision during the operation of an aircraft and is a key component to ensure flight safety. The anti-collision lights of the Korean Utility Helicopter (KUH) consist of upper and lower lights, and the power supply of anti-collision lights mounted on the aircraft. The anti-collision light is designed as a dual structure capable of brightness control and selective lighting. During the operation after delivery of the aircraft, abnormal lighting of anti-collision light occurred. In this paper, a comprehensive review of the aircraft system and component level was conducted to solve these phenomena at first. Then, the causes of anti-collision light anomalies were analyzed and the design changes are presented. The validity of design changes has been verified through the component and aircraft system ground/flight test.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.5
• /
• pp.507-513
• /
• 2008

In this paper, we present a development of an Avionics Hot Bench(AHB) used for the verification of operational flight programs and fault analysis using various simulation and stimulation software. We propose an application of the open system architecture to develop the AHB which can be used for the development of a real aircraft avionics system. In the design of the AHB, to reduce the development period and cost we use as many as commercial off-the-shelf hardware and software items. The developed AHB is compared with the existing proven AHB which was used for T-50 avionics system development. Thorough comparison between the test results using the developed AHB and those using the existing AHB is performed and the overall comparison results are very satisfactory.

• Composites Research
• /
• v.33 no.3
• /
• pp.115-124
• /
• 2020

Laminate composites, especially Carbon fiber-reinforced composites are wide used in various industry such as aerospace and automotive industry due to their high specific strength and specific stiffness. However, the laminate composites has a big disadvantage that delamination occurs because the arrangement of the fibers is all arranged in the in-plane direction, which limits the field of application of the laminate composites. In this study, we first developed a laminate composites T-beam in which π-beam and flat plate were combined and optimized the design parameters through structural analysis and mechanical tests. Afterwards, 3D weave preform T-beam was developed by applying the same design parameters of laminate composites T-beams, and improved mechanical strength was achieved compared to laminated structures. These findings are expected to be applicable to existing laminated composite structures that require increased strength.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.119-119
• /
• 2003

탄화규소나 열분해 탄소는 고온 특성 및 화학적인 안정성 이 우수하여 단미 혹은 코팅재로로 소재의 성능을 향상시키기 위하여 에너지 관련 분야, 반도체 치구 분야, 방위산업 및 항공우주 분야와 원자력 분야에서 다양하게 사용된다. 특히 원자력 분야에서는 고온형 원자로의 노심 요소 부품으로 적용 및 개발을 고려하고 있으며, 대표적인 예로 수소생산용 초고온 가스냉각로의 코팅 핵연료 입자를 들 수 있다. 일반적으로 TRISO라 불리는 가스냉각로 핵연료는 구형 $UO_2$ kemel의 주변을 PyC-SiC -PyC의 삼중 코팅층으로 둘러싸는 구조를 하고 있으며, 이 코팅층들은 kernel물질이 분열하는 동안 발생되는 내부 기체 압력을 견디는 압력용기 역할과 기체나 금속 핵분열 생성물들을 가두는 확산 장벽 역할을 하게 된다. 본 연구에서는 구형의 $UO_2$대신 선행연구를 위하여 구형 ZrO$_2$를 이용하여 증착온도나 시간 및 입력기체비 등의 화학증착 변수로 조절하여 SiC 및 PyC을 코팅하고, 각 변수들에 의한 증착층의 거동을 고찰하고자 하였다.