• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.4
• /
• pp.39-45
• /
• 1995

본 논문은 복수 집중질량을 갖고 제어 종동력을 받는 자유 Timoshenko보의 동적 안정성에 관한 것으로, 비행중의 미사일이나 로켓의 연료탱크, Payload등의 기계장치부를 복수의 집중질량으로 간주하여 이러한 항공우주 구조물들이 추진력인 종동력을 받을때에 대한 계의 동적 안정성을 판별한다. 수학적 모델에 대한 운동방정식은 확장된 해밀톤 원리를 이용한 유한요소법에 의해 유도되며, 복수 부가질량의 위치 및 크기변화, 센서의 위치 및 게인(gain)의 변화에 따른 계의 안정성 지도(stability maps)를 보여준다. 또한 보의 전단 변형이나 회전관성의 효과 뿐만아니라, 추질력의 방향이 제어되는 경우와 제어되지 않는 경우에 대한 최대 추진력 값이 수치 시뮬레이션을 통해 예측된다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.2
• /
• pp.133-140
• /
• 2015

In this paper, a roll angle estimation method of a rolling airframe using a low grade GPS and a roll rate gyro is proposed. The strength of the received signal of the GPS antenna attached on the rolling airframe is maximized when the GPS satellite is placed on the plane determined by the x-axis of the rolling airframe and the GPS antenna axis. Under the assumption that the x-axis of the rolling airframe is coincident with its velocity vector, the roll angle of the rolling airframe is calculated from the relative position vector of the satellite to the GPS when the GPS signal strength becomes maximum. The Kalman filter combined with a roll rate gyro is introduced to increase the determination accuracy of the roll angle. The performance of the proposed method is verified via 6-DOF simulations.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.6
• /
• pp.516-525
• /
• 2015

In this paper, the acoustic pressure of a helicopter rotor in hovering and low speed descent flight is predicted and compared with experimental data. Ffowcs Williams-Hawkings equation is used to predict the acoustic pressure. Two different wind tunnel test data are used to validate the predicted results. Boeing 360 model rotor test results are used for the low-frequency noise in hover, and HART II test results are employed for the mid-frequency noise, especially BVI noise, in low speed descent flight. A simple free-wake model as well as the state-of-the-art CFD/CSD coupling method are adopted to perform the analysis. Numerical results show good agreement against the measured data for both low-frequency and mid-frequency harmonic noise signal. The noise carpet results predicted using the FFT(Fast Fourier Transform) shows also reasonable correlation with the measured data.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.7
• /
• pp.615-626
• /
• 2009

The objective of this study is to investigate the interference effects due to tandem rotor's overlap in the forward flight. To resolve the instabilities caused by close proximity of the wake to the blade surface, the field velocity approach is implemented to the existing unsteady panel code coupled with a time-marching free wake model. The modified code is then used to investigate the effects of the selected parameters on the forward flight performance of the tandem rotor. The calculated results for rotor separation effect indicate that stagger(d/D) appears to have little effects on the forward flight performance at high advance ratio and the square of gap(H/D) is inversely proportional to overlap induced power factor. In addition, it is also shown that the overlap induced power factor increases to a certain extent and decrease back as the advance ratio increases.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.46 no.2
• /
• pp.95-105
• /
• 2018

Increasing cruise speed is an important issue for the development of the next generation rotorcraft. Among several concepts proposed by previous research, the rotorcraft with ducted fan demonstrates its possibility of high-speed flight. In this study, numerical simulations are conducted to investigate the aerodynamic and flow characteristics of multi-ducted fan in forward flight. The aerodynamic efficiency around front ducted fan is determined by interaction between free-stream velocity and the induced velocity. While flow characteristics of rear ducted fan are dominantly influenced by the front ducted fan. Separation in the front ducted fan occurs faster than that of rear ducted fan, and the separation at duct inlet induces an increase of fan thrust. As a result of interaction effect between each ducted fan, relatively aligned inflow enters to the rear ducted fan. Therefore, thrust of the rear fan is decreased steadily before separation, and sudden changes of thrust in fans occur simultaneously. Due to the pressure decrease on lower surface, the normal force of rotorcraft is reduced with forward speed.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.8
• /
• pp.681-688
• /
• 2021

This paper considers the trajectory and impact point dispersion analysis of the test launch vehicle (TLV). The analysis, which performed before and after its flight test on November 28, 2018, is described and verified by comparing with the flight test results. The six degree-offreedom (DOF) simulation is used to compute the dispersion of the trajectory, attitude, and impact point, where the launch vehicle performance variations and wind effects during the atmospheric phase are included. The impact area to guarantee the flight safety is determined using the results of the dispersion analysis. The flight test results confirm that the safe flight of TLV is performed within the predicted dispersion boundary.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.3
• /
• pp.173-180
• /
• 2022

The operation and transportation environment for an unmanned aerial vehicle will be completely different from those for the conventional air and ground transportation. The requirement for a traffic management system for its safe operation has been emerging. Accordingly, investigation is being conducted to analyze the danger that unmanned aerial vehicle may encounter during the flight and to provide the countermeasure by the simulation. When the drones operate in an urban environment, they may be affected by the wind around the building. Thus it is essential to predict the influence of the gust and analyze the resulting risk. In this paper, a method for evaluating the safety for a flight mission under the gust is suggested. By using the precise 6-degree-of-freedom flight simulation that is capable of simulating the gust condition, possible deviation from the pre-planned flight path in terms of the attitude orientation will be predicted. A method of quantifying the probability of the flight mission failure will also be presented.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.50 no.12
• /
• pp.857-866
• /
• 2022

Fixed-wing UAVs have long endurance and range capabilities compared to other aerial platforms. These advantages led fixed-wing UAVs to become a popular platform for reconnaissance missions in the military. In this research, we modeled fixed-wing UAVs, including the landing gear model and developed a guidance and control system for flight control computers to construct a HILS environment. We also developed an autopilot system that includes automated take-off, cruise, and landing control for UAVs. We also retrived the Aerodynamic coefficients an UAV using Datcom and AVL software and used them for 6 degrees of freedom modeling. The Flight control computer calculates guidance commands using the Carrot chasing guidance law after distinguishing the condition of the UAV based on 16 pre-defined flight modes and calculates control inputs using Nonlinear Dynamic Inversion (NDI) control scheme. We used RTNngine to integrate the Simulink model and flight control computer for HILS environment formulation.

• The Korean Journal of Air & Space Law and Policy
• /
• v.35 no.2
• /
• pp.75-111
• /
• 2020

The civilian drone world has evolved in recent years from one dominated by hobbyists to growing involvement by companies seeking to profit from unmanned flight in everything from infrastructure inspections to drone deliveries that are already subject to regulations. Drone flight under the property right relation with the land owner would be deemed legal on the condition that expeditious and innocent passage of drone flight over the land be assured. The United Nations Convention on the Law of the Sea (UNCLOS) enshrines the concept of innocent passage through a coastal state's territorial sea. Passage is innocent so long as it is not prejudicial to the peace, good order or security of the coastal state. A vessel in innocent passage may traverse the coastal state's territorial sea continuously and expeditiously, not stopping or anchoring except in force majeure situations. However, the disturbances caused by drone flight may be removed, which is defined as infringement against the constitutional interest of personal rights. For example, aggressive infringement against privacy and personal freedom may be committed by drone more easily than ever before, and than other means. The cost-benefit analysis, however, has been recognjzed as effective criteria regarding the removal of disturbances or injunction decision. Applying that analysis, the civil action against such infringement may not find suitable basis for making a good case. Because the removal of such infringement through civil actions may result in only the deletion of journal article. The injunction of drone flight before taking the information would not be obtainable through civil action, Therefore, more detailed and meticulous regulation and criteria in public law domain may be preferable than civil action, at present time. It may be suitable for legal stability and drone industry to set up the detailed public regulations restricting the free flight of drone capable of acquiring visual information amounting to the infrigement against the right of personal information security.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.9
• /
• pp.607-616
• /
• 2019

Free body diagram analysis is done for key parts of pilot stage of LLV (Load Limit Valve) which is used to protect overload for static structural test of aerospace flight vehicle. It is shown through the analysis that diameter ratio($D_2)^{ten}/D_2)^{comp}$) of two poppets in a pilot stage must be equal to piston area ratio($A_{comp}/A_{ten}$) of a hydraulic actuator for making a poppet open consistently at constant force applied by an actuator. The result of the analysis is verified by measuring geometries of the poppets in the four different LLVs which are corresponding to four actuators with different capacity and have been used after being imported in this laboratory. Results of "Adjuster resolution tests" with two different pilot stages show the max. deviation of Fi(actuator force in instant of opening poppet) from average Fi obtained for each turn of adjuster is 0.3KN and max. deviation of the Fi normalized by average Fi of each turn of adjuster is 3.7%. From the results, it is verified that the two pilot stages with same poppet diameter ratio make a poppet consistently open at Fis within ${\pm}3.7%$ deviation from the average Fi. The deviation is shown to be caused from frictional force of O-ring in the poppet. Additionally, design factors for poppet spring and adjuster, which are also key parts of the pilot stage, are distinguished and procedure for deciding the factors are also shown in this study.