• Korean Chemical Engineering Research
• /
• v.45 no.4
• /
• pp.328-334
• /
• 2007

Chemical heat pump system of 2-propanol/acetone/hydrogen is most suitable to the recovery of waste heat of power plant. various types of 5 wt% Pt-alumina catalysts were prepared for 2-propanol dehydrogenation using sol-gel method. The characteristics and the dehydrogenation reaction rate of each catalyst were investigated. Pt-alumina xerogel catalyst has excellent reaction rate and good durability in comparison with the existing alumina supported Pt catalysts. Pt-alumina aerogel catalyst had the highest reaction rate in all prepared catalysts, but sufficient aging time was necessary to maintain its reaction rate. A potential advantage of the aerogel catalyst is the fact that the high temperature heat treatment is not required. Without heat treatment or with low temperature heat treatment, the Pt-alumina aerogel catalyst has excellent reaction rate as well as durability and this gives us the economic advantage. Alumina xerogel supported Pt catalyst prepared by incipient wetness method showed good reaction rate, and had good mechanical strength. Blank alumina xerogel prepared by sol-gel method can be used for the support of metal catalysts.

• Proceedings of the Korea Association of Crystal Growth Conference
• /
• 1996.06b
• /
• pp.311-352
• /
• 1996

Peltier 효과를 이용한 열전소자는 열응담 감도가 좋고 선택적 냉각이 가능하며 무소음, 무진동 및 소형화의 장점으로 각종 전자부품의 국부냉각소자로 응용되고 있다. 또한 최근 냉매의 사용없이 냉각이 가능한 열전재료를 이용한 자동차나 가정용 에어컨 및 냉장고 등의 각종 냉방시스템의 개발도 크게 주목을 받고 있다. 기존의 Bi2Te3계 단결정 열전재료는 성능지수는 우수하나, 기계적 취약성에 기인하여 소자가공시 수율 저하가 가장 큰 문제점으로 지적되고 있다. 이와 같은 문제점을 해결하기 위해 최근 단결정에 비해 기계적 강도가 우수한 다결정 열전재료의 제조공정에 관한 연구가 활발히 이루어지고 있으며, 그 일환으로 기계적 합금화법을 이용한 열전재료의 제조공정이 연구되고 있다. 원료금속이 고 에너지 볼-밀 내에서의 연쇄적인 파괴와 압접에 의해 합금분말로 변화되는 기계적 합금화 공정은 상온공정으로 이를 사용하여 다결정 열전재료를 제조시 기존의 다결정 열전재료의 제조공정인 "용해 및 분쇄법'과 비교하여 제조단가를 낮출 수 있는 장점이 있다. 본 연구에서는 전자냉각소자용 열전재료로서 상온부근에서 성능지수가 가장 우수한 p형 (Bi,Sb)2Te3 및 n형 Bi2(Te,Se)3 합금분말을 기계적 합금화 공정으로 제조하여 분말 특성을 분석하였으며, 가압소결 후 열전특성의 변화거동을 연구하였다. 순도 99.99% 이상인 Bi, Sb, Te, Se granule을 (Bi1-xSbx)2Te3 및 Bi2(Te1-ySey)3 조성에 맞게 칭량하여 불과 분말의 무게비 5:1로 강구와 함께 공구강 vial에 장입 후, Spex mixer/mill을 이용하여 기계적 합금화 하였다. 기계적 합금화 공정으로 제조한 분말에 대한 X-선 회절분석과 시차 열분석으로 합금화 정도를 분석하였다. (Bi1-xSbx)2Te3 및 Bi2(Te1-ySey)3 합금분말을 10-5 torr의 진공중에서 300℃∼550℃의 온도로 30분간 가압소결하였다. 가압소결체의 파단면에서의 미세구조를 주사전자현미경으로 관찰하였으며, 상온에서 가압소결체의 열전특성을 측정하였다. (Bi1-xSbx)2Te3의 기계적 합금화에 요구되는 공정시간은 Sb2Te3 함량에 따라 증가하여 x=0.5 조성에서는 4 시간 45분, x=0.75 조성에서는 5 시간, x=1 조성에서는 6 시간 45분의 vibro 밀링이 요구되었다. n형 Bi2(Te1-ySey)3 합금분말의 제조에 요구되는 밀링시간 역시 Bi2Se3 함량 증가에 따라 증가하였으며 Bi2(Te0.95Se0.05)3 합금분말의 제조에는 2시간, Bi2(Te0.9Se0.1)3 및 Bi2(Te0.85Se0.15)3 합금분말의 형성에는 3시간의 bivro 밀링이 요구되었다. 기계적 합금화로 제조한 p형 (Bi0.2Sb0.8)2Te3 및 n형 Bi2(Te0.9Se0.1)3 가압 소결체는 각기 2.9x10-3/K 및 2.1x10-3/K 의 우수한 성능지수를 나타내었다.

• Journal of Food Hygiene and Safety
• /
• v.29 no.1
• /
• pp.40-46
• /
• 2014

We have screened Bacillus strains suitable for the fermentation of soybean products with respect to the control of Bacillus cereus and the reduction of biogenic amines. Of 26 isolates, a strain named as the SCK A08 carried antimicrobial activity against B. cereus and Staphylococcus aureus, major food poisoning species in soybean products. PCR analysis revealed that the SCK A08 strain did not contain genes for Bacillus cereus toxins including nonhemolytic enterotoxin, hemolytic enterotoxin, cytotoxin K, cereulide and certrax. The SCK A08 strain could degrade histamine, tyramine, putrescine, and cadaverine by 67.41%, 76.59%, 57.32%, and 50.69%, respectively, during fermentation in cooked soybeans containing 0.5% (w/w) of each biogenic amine. The morphological and biochemical properties and phylogenetic relationships based on 16S rRNA gene sequences indicated that the isolate was most closely related to Bacillus licheniformis. Use of the strain SCK A08 would be a potential measure to overcome two hygienic problems that were frequently faced during manufacture of traditionally fermented soybean products.

• Applied Chemistry for Engineering
• /
• v.35 no.3
• /
• pp.214-221
• /
• 2024

Polyether ketone (PEEK) has been widely used in membranes because of its excellent thermal stability, chemical resistance, and significant mechanical strength. However, the melting temperature is very high, making it difficult to find suitable solvents. Therefore, in this study, PEEK and benzophenone (DPK) were used as diluents to prepare a membrane with excellent mechanical strength and chemical stability using the thermally induced phase separation (TIPS) method to compensate for the shortcomings of PEEK membrane preparation and achieving the highest performances. The optimal membrane manufacturing conditions were confirmed through the crystallization temperature and cloud point according to the polymer content through the phase diagram. Subsequently, the morphological changes of the membrane, influenced by the polymer and diluent content, were confirmed through scanning electron microscopy (SEM). Additionally, the membrane thickness tended to increase with higher polymer content. Tensile strength and DI-water permeability tests were conducted to confirm the mechanical strength and permeability of the membrane. Through the previous characteristic evaluation, it was confirmed that the membrane using PEEK had excellent mechanical strength and permeability.

• Journal of dental hygiene science
• /
• v.10 no.1
• /
• pp.25-29
• /
• 2010

This study was to estimate the effect of herbal medicines on periodontal disease. To screen effective materials for periodontal disease, we performed a series of test for 15 herbal medicine extracts. MIC test for P. gingivalis, IL-$1{\alpha}$ inhibition test, MMP-1 inhibition test and SOD activation test were carried out for herbal medicine extracts, respectively. The results are as followings : 1) Eunhang, Youkdoogu, Daewhang, Hoobak, Goojulcho, Yongacho, Mokhyang, Sesin, Sancho and Hoehyang extracts were effective for reduce P. gingivalis, 2) Eunhang, Jacyak, Youkdoogu, Hagocho, Hoobak, Guaru and Sanyak extracts showed high IL-$1{\alpha}$ inhibition rates, 3) Eunhang and Youkdoogu extracts have effects on MMP-1 inhibition, 4) Eunhang, Sanyak and Youkdoogu extracts effectively activate SOD. Especially, Eunhang extract has high performance through all estimations and can effectively prevent and treat periodontal disease.

• Korean Journal of Applied Biomechanics
• /
• v.18 no.1
• /
• pp.129-135
• /
• 2008

This research was examined the effect of Backward Walk on ground reaction force and we achieved it by using ground reaction force machine during the Backward Walk activity with Latin and Rumba dance. We find that it was significant difference of vertical(Fz) ground reaction force of right foot in touchdown and toe-off and vertical(Fz), horizontal(Fx), front-rear(Fy) ground reaction force of left foot. There was not significant differences in vertical ground reaction force between superior athlete and unskilled athlete, but there was a significant difference in left foot. Through this, we know that the sports capability of left foot which has been developed through the training is better in superior athlete group. Therefore understanding of difference in ground reaction force and repeated training can help the unskilled athlete and beginner to accomplish the accurate movement.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.643-649
• /
• 2005

This study was investigated to find out optimal medium maximizing the production of fibrinolytic enzyme by Bacillus sp. isolated from Korean fermented soybean paste, which could hydrolyze the fibrin produced through the blood coagulation mechanism in human body. Among carbon sources tested, galactose was most effective for the enzyme production, and the level of the concentration for the optimal enzyme production was $4\%$(w/v). For nitrogen sources tested, malt extract was most effective for the enzyme production, and level of the concentration for optimal enzyme production was $4\%$(w/v). For mineral sources tested, $K_2HPO_4$ was most effective for enzyme production. The enzyme was maximally produced by cultivating the organism at the liquid medium of the initial pH 6 and temperature of $40^{\circ}C$.

• The Korean Journal of Mycology
• /
• v.15 no.1
• /
• pp.1-8
• /
• 1987

The purpose of this experiment is to examine if G. lucidum extracts could have an effect on leukocyte migration and to select the best chemotactic factor for leukocyte migration. When chemotactic factors such as TC-199 medium, filtrate of E. coli culture, N-fMLP, and G. lucidum extracts were used, N-fMLP, G. lucidum extracts and filtrate of E. coli were positive effect, but TC-199 medium was less than others. The various concentrations of the chemotactic factors such as G. lucidum extracts(1.00%, 0.10% and 0.01%) were stimulated for the leukocytes migration in the modified Boyden chambers, however, the lowest concentration such as 0.01% was more effective than others for the chemoattractant of the leukocyte migration When the leukocyte was treated with G. lucidum extracts(1.00%, 0.10%, and 0.01%) at room temperature for 120 minutes, the chemotactic activities had a good effect at 0.01%. Therefore, leukocyte was affected by G. lucidum extracts.

• Journal of Korean Library and Information Science Society
• /
• v.49 no.3
• /
• pp.263-282
• /
• 2018

This study analyzed nineteen best-practices (161 sub-programs) regarding school library media program. The authors conducted content analysis based on The Library Media Specialist's Taxonomy and the CIPP Model. In the analysis of taxonomy showing the degree of involvement of librarian teachers, Level Seven indicating a concerted effort to promote school library program was the most important (37.6%). Among the ten levels of taxonomy, the highest level (levels 6 to 10, high involvement of librarians) accounted for 65.9%. According to the analysis of the CIPP Model, (Context) most of the excellent programs were aimed at reading education (41.5%) and library use education (11.3%), and more than half (53.8%) cases were initiated by learners' needs. (Input) excellence programs employed various teaching materials and were operated at fixed time. (Process) the programs were run in a variety of ways, mainly with reading instruction (30.4%) and cultural activities (17.3%). (Product) As a fruit of programs, students and parents' satisfaction, students' achievement, self-confidence, and self-improvement were reported.

• Applied Chemistry for Engineering
• /
• v.5 no.1
• /
• pp.54-62
• /
• 1994

Bisphenol A polycarbonate(PC) and polyethylene terephthalate(PET) was blended with methylmethacrylate-butadiene-styrene(MBS) copolymer for the improvement of impact resistance strength PC/PET alloy blending with PC more than 15 parts to 100 parts of PET usually have poor compatability, but increased the compatability characteristics of PC/PET alloy prepared by addition of MBS compatabilizer. The compatability of PC and PET using compatabilizer, MBS was determined by measuring the thermal characteristics of Tg difference between PC and PET, and crystallization temperature, Tcc. As the Tg difference becoming narrow to $60^{\circ}C$, and Tcc decreasing to $150^{\circ}C$, the comparability of PC and PET was increased. And also tough rate impact strength to PC/PET alloy using MBS was increased, in case more than 15 parts of PC being blended to PET.