• Korean Journal of Materials Research
• /
• v.5 no.7
• /
• pp.816-819
• /
• 1995

(Ba$_{1-x}$ , Sr$_{x}$)TiO/$_3$thin films on Pt/Ti/SiO$_2$/Si substrates were prepared by LP MOCVD(Low Pressure Metal-Organic Chemical Vapor Deposition). The crystalinity of BST deposit had a (100) preferred orientation with increasing deposition temperature due to surface diffusion. BST films deposited at 90$0^{\circ}C$ showed a dielectric constant of 365 and a dissipation factor of 0.052 at a frequency of 100kHz. The chance of capacitance of the films with applied voltage was small, showing paraelectric properties. BST film deposited at 90$0^{\circ}C$ had a charge storage density of 60 fc/${\mu}{\textrm}{m}$$^2$at a field of 0.2MV/cm and the leakage current density of 20 nA/$\textrm{cm}^2$ at a field of 0.15 MV/cm.cm.

• Journal of Korean Society of Transportation
• /
• v.35 no.6
• /
• pp.525-544
• /
• 2017

With the advent of the big data era, the interest in the development of land using traffic data has increased significantly. However, the current research on traffic big data lingers around organizing or calibrating the data only. In this research, a novel method for discovering the hidden values within the traffic data through data mining is proposed. Considering the fact that traffic data and network structures have similarities, network analysis algorithms are used to find valuable information in the actual traffic volume data. The PageRank and HITS algorithms are then employed to find the centralities. While conventional methods present centralities based on uncomplicated traffic volume data, the proposed method provides more reasonable centrality locations through network analysis. Since the centrality locations that we have found carry detailed spatiotemporal characteristics, such information can be used as an objective basis for making policy decisions.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.88-88
• /
• 2011

ZnO는 직접 천이형 반도체로써, 상온에서 3.4eV에 해당하는 띠틈을 가지고 있다. 뿐만 아니라 60meV의 큰 엑시톤 결합에너지를 가지고 있어 단파장 광전 소자 영역의 LED(Light Emitting Diode)나 LD(Laser Diode)에 널리 사용되고 있다. 하지만 일반적으로 격자틈새 Zn(Zni2+)이온이나 O 빈자리(V02+)이온과 같은 자연적인 도너 이온이 존재하여 n-형 전도성을 나타낸다. 그러므로 ZnO계 LED와 LD의 개발에 있어서 가장 중요한 연구 과제는 재현성 있고 안정된 고농도의 p-형 ZnO박막을 성장시키는 것이다. 하지만, 자기보상효과나 얕은 억셉터 준위, 억셉터의 낮은 용해도로 인하여 어려움을 가지고 있다. 본 연구에서는 고품질의 p-형 ZnO박막을 제작하기 위해 AlN를 도핑시킨 ZnO박막을 RF 마그네트론 스퍼터링 법을 이용하여 Ar과 O2분위기에서 성장시켰다. ZnO와 AlN타겟을 동시에 사용하였으며, ZnO타겟에 걸어준 RF 파워는 80W, AlN타겟에 걸어준 RF 파워는 5~20W로 변화시켰다. 박막의 전기적, 광학적 특성은 XPS (X-ray Photoelectron Spectroscopy), REELS (Reflection Electron Energy Loss Spectroscopy), XRD (X-ray Diffraction), SIMS (Secondary Ion Mass Spectrometry), AES (Auger Electron Spectroscopy), Hall measurement를 이용하여 연구하였다. XPS측정결과, AlN를 도핑시킨 ZnO박막의 Zn2p3/2와 O1s피크는 undoped ZnO박막의 피크보다 낮은 결합에너지에서 측정되었다. 모든 박막이 결정화 되었으며, (002)방향으로 우선적으로 성장된 것을 확인할 수 있었다. 홀 측정 결과, 기판을 $200^{\circ}C$로 가열하면서 성장시킨 박막이 p-형을 나타내었으며, 비저항(Resistivity)이 $5.51{\times}10^{-3}{\Omega}{\cdot}m$, 캐리어 농도(Carrier Concentration)가 $1.96{\times}1018cm^{-3}$, 이동도(Mobility)가 $481cm^2$/Vs이었다. 또한 QUEELS -Simulation에 의한 광학적 특성분석 결과, 가시광선영역에서 투과율이 90%이상으로 투명전자소자로의 응용이 가능하다는 것을 보여주었다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.1 no.1
• /
• pp.71-80
• /
• 1989

In this paper, the concept of the infinite element is applied to the linear wave diffraction and radiation problems. The hydrodynamic pressure forces are assumed to be inertially dominated, and viscous effects are neglected. The near field region surrounding the solid body is modelled using the conventional finite elements, and the far field region is represented using the infinite elements .In order to represent the scattered wave potentials in the far field region more accurately, the infinite elements are developed using special shape functions derived from the asymptotic expressions for the analytical eigenseries solution of the scattered waves. The system matrices of the infinite elements are constructed by performing the integration in the infinite direction analytically to achieve computational efficiency. Numerical analyses are carried out for vertical axisymmetric bodies to validate the infinite elements developed here. Comparisons with the results by other available numerical solution methods show that the present method using the infinite elements gives fairly good results. Numerical experiments are per-formed to determine the suitable location of the infinite elements and the appropriate size of the finite elements which directly affect accuracy and efficiency of the solution.

• Journal of the Korean Magnetics Society
• /
• v.3 no.4
• /
• pp.305-309
• /
• 1993

Thermal stability of Co/Cu artificial superlattice (AS) prepared by RF-magnetron sputtering and the effect of low temperature annealing on the magnetoresistance of the AS have been investigated in this work. Dependence of annealing behavior on the Cu spacer thickness, Fe underlayer thickness, and kind of the underlayer was examined and the relationship between the interfacial reaction and magnetoresistance was studied. It turned out that when Co/Cu AS was annealed at low temperature ($<450^{\circ}C$), the magnetoresistance could increase in the case of AS with thick spacer Cu ($20~25\AA$) layer, whereas it decreased in the case of AS with thin spacer Cu ($7\AA$) layer, which of the former is in contrast with previous reports and the latter in consistent with them. The increase of magnetoresistance is due to increase of interfacial atomic sharpness, which is supported by low angle X-ray diffraction analysis. The thermal stability of Co/Cu AS was better in the case of thick Fe underlayered AS. Interfacial reaction (separation of intermixed Co and Cu) could be observed at lower temperature for (200)-textured samples than for (111)-textured samples, which can be interpreted in terms of interdiffusion kinetics depending on the crystallographic orientation.

• Korean Journal of Social Welfare
• /
• v.65 no.1
• /
• pp.83-107
• /
• 2013

The purpose of this study is to understand the life experiences of an adult adoptee. For this purpose, the data were collected through in-depth interviews with an adult adoptee, observation, and documents and analyzed using life history approach. Results of analysis were composed of summarized life history, thick description of life history, theme analysis, and issues for intervention. The themes generated from analysis are 'a slub', 'a larva that want to be a butterfly', 'I am okay. No, I am not okay', 'because it is not my fault', 'love, the critical determinant leading my life'. Researchers, also, examined intervention issues of adoption, post-adoption service, closed adoption or open adoption, searching root, intervention for adult adoptee. Based on the results of this study, the policies and practical guidelines for adult adoptees were suggested.

• The Transactions of the Korea Information Processing Society
• /
• v.1 no.4
• /
• pp.517-530
• /
• 1994

In this paper, design of small microprocessor unit is implemented using research purpose VHDL and CAD tools by top-down design method. For this, original basic MPU and its pipelining architectures are suggested. Once, design target, instruction sets, architecture are decided, the operation is confirmed by C language simulation, and then the operation is confirmed by checking internal register contents for given inputs in the case of VHDL simulation. Then, design layouts are made by full/semi-custom design methods by research CAD tools and related simulation is implemented. The feasibility of suggested pipelined structure for performance improvement is confirmed by simulation, and related problems and future research directions are discussed. In conclusion, the MPU design methodology is set up and the design change of architecture is possible by this paper.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.1
• /
• pp.32-42
• /
• 2018

The importance of facility maintenance management cannot be overemphasized in that not only the value but also the performance of the facility is determined by the level of maintenance. The maintenance cost of the facility ranges from 3 to 10 times the initial construction cost depending the type and use of the facility over the life span. This maintenance importance is increased for the group of facilities and even more critical when the facilities compete for the limited budget with the limited resources such as manpower and equipment. This study analyzed sixteen public facility management corporations primarily for three items: 1) facility management system, 2) long-term rehabilitation plan, 3) the rehabilitation selection system. This paper provides and recommends the key elements of the facility maintenance management system based on the analysis of the sixteen corporations.

• Korean Business Review
• /
• v.13
• /
• pp.89-105
• /
• 2000

This study explores the general marketing ethics among Koreans and helps us understand bu such as bribery, unfair price increases, and so on. By examining msiness ethics in Korea. Based on a scenario approach, we focus on the ethical problems developed or identified from previous research in the western countries. We find that the people in our sample perceive the relative seriousness of ethics problemsarketing-related ethical issues, first we find the differences in how the young and old recognize business ethics. Specifically the younger generation in Korea shows less ethical reaction in general because they have not developed a long-term perspective. Moreover the older generation shows less ethical attitude towards bribery. Second, we confirm the findings in Zey-Ferrell et al (1991) that all individuals think they are more ethical than others. We also discuss other demographic variables related issues that might affect the business ethics in Korea.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.41 no.4
• /
• pp.279-289
• /
• 2017

This paper presents some of the methods used to incorporate the parts constituting a product. A new relation function concept and its structure are introduced to analyze the relationships of component parts. This relation function has three types of information, which can be used to establish a relation function structure. The relation function structure of the analysis criteria was established to analyze and present the data. The priority components determined by the analysis criteria can be integrated. The analysis criteria were divided based on their number and orientation, as well as their direct or indirect characteristic feature. This paper presents a design algorithm for component integration. This algorithm was applied to actual products, and the components inside the product were integrated. Therefore, the proposed algorithm was used to conduct research to improve the brake discs for bicycles. As a result, an improved product similar to the related function structure was actually created.