• Journal of Korean Ophthalmic Optics Society
• /
• v.5 no.1
• /
• pp.73-81
• /
• 2000

This review on ocular toxicology concentrates on the effects on ocular health and contact lens wear induced by systemically used drugs, including alcohol. Many systemically administered drugs produce ocular adverse effects. Fortunately, relatively few are capable of causing significant, irreversible visual impairment. The visual symptoms of acute intoxication are as follows : Drop in vision/visual acuity, diplopia, poor dark adaptation, increase in time for glare recovery, early cataract, decreased depth perception, blue-yellow or red-green colour defect and visual hallucinations. Blinking pattern, tear production, and discoloration of contact lenses can be affected by some systemic or local ocular medications. The cornea, conjunctiva, or eyelids may react to some systemic medications and to some preservatives used in contact lens solutions. The hydrogel contact lens act as a drug reservoir that emits the drug over time. I discuss management of contact lens-induced infectious and inflammatory conditions.

• Journal of Advanced Navigation Technology
• /
• v.15 no.6
• /
• pp.1111-1117
• /
• 2011

We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has We was designed the portable LED light which can shadowless shooting and developed using a high-power LED that medical attention as a new lighting components for structural confirmation of oral dental area, medical and surgical lesions in the local area. LED which applied to the development, was used the 3-color LEDs for possible of implement a variety of colors and adjusted the light intensity. It is being magnified of delicacy expressiveness and three-dimensional for tone of the subject-specific. It has been developed a highly efficient light module that LED is used to consider the electrical characteristics and optical properties. SMPS has produced for use in mobile that can be driven at low voltage. In addition, it was also possible to implement a variety of colors from monochromatic Light to polychromatic light using by PWM control method and were available 32,768.

• The KIPS Transactions:PartB
• /
• v.12B no.1 s.97
• /
• pp.39-46
• /
• 2005

In immersive virtual reality system, since virtual worlds do not supply users with sufficient spatial information af real world does, the users frequently experience clumsiness and roughness while manipulating virtual objects. To overcome this problem, we propose Visual Guider in this paper as a tool for enhancing user's visual space perception in immersive virtual worlds. The Visual Guider aids users to recognize exocentric distances between different scene points and egocentric distances from the observation point to other points in the scene fast and precisely. Its concept is imported from the rectangular grids frequently used in two-dimensional windows applications. We applied the proposed technique to an experimental virtual space implemented in $CAVE^(TM)-like$ system and tested its effectiveness while users grasp and move virtual objects.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.13 no.1
• /
• pp.51-56
• /
• 2003

The main goal of existing mobile robot system was a complete autonomous navigation and the vision information was just used as an assistant way such as monitoring For this reason, the researches have been going towards sophistication of autonomousness gradually and the production costs also has been risen. However, it is also important to control remotely an inexpensive mobile robot system which has no intelligence at all. Such systems may be much more effective than fully autonomous systems in practice. Visual information from a simple camera and distance information from ultrasonic sensors are used for this system. Collision avoidance becomes the most important problem for this system. In this paper, we developed a force feedback joystick to control the robot system remotely with collision avoiding capability. Fuzzy logic is used for the algorithm in order to implement the expert s knowledge intelligently. Some experimental results show the force feedback joystick werks very well.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.5 no.1
• /
• pp.141-148
• /
• 1985

This paper is a study on a analysis of geometrical composition about two Back-Jae stone pagodas-stone pagoda at the site of Mir$\bar{u}$k-Sa Temple in Iksan and five storied stone pagoda at the site of Ch$\check{o}$ngrim-Sa Temple in Puy$\check{o}$, existing stone pagodas which Were built in Back-Jae Dynasty. By using P31 terrestrial metric camera and A-10 for precision stereo plot, Ch$\check{o}$ngrim-Sa stone pagoda which has Bock-bal and Mir$\bar{u}$k-Sa stone pagoda which has many broken area are analyzed comparatively. From this result same geometric composition principle; orthotrigon is drawn in respect to module and the length ratio of the widths of Okgesuks which exist at the end-point of the orthotrigon, is found to be decrease as 9 : 8 : 7 : 6 : (5) also the height up to Bock-bal before broken, is able to estimate.

• Journal of the Korean Geophysical Society
• /
• v.5 no.2
• /
• pp.75-86
• /
• 2002

A TSP(Tunnel Seismic Prediction) survey which is modified VSP(Vertical Seismic Profiling) survey applied in tunnel was carried out at Pyongtaek and Incheon liquefied petroleum gas(LPG) storage cavern during excavation. The TSP survey in Pyongtaek LPG storage cavern which is located below Namyangho was performed to confirm the location and orientation of the fault detected at pre-investigation stage. The TSP survey was carried out in access tunnel, construction tunnel, and watercurtain tunnel to characterize 3 dimensional figure of the fault. The results of TSP survey are compared four in vestigation boreholes drilled in shelter of access tunnel. The fault was also detected by borehole survey and the location was coincided with the result of TSP survey. Depending on the result of TSP survey and core logging, the design such as cavern layout and length was changed. Another TSP survey was performed in Incheon LPG storage cavern which is located below sea. Because of poor geological information at pre-investigation stage and suffering from heavy leakage of groundwater, the TSP survey to detect fracture zone was carried out. The support and grouting design was reflected by the result of TSP survey.

• Journal of the Korean Chemical Society
• /
• v.22 no.3
• /
• pp.164-172
• /
• 1978

Carboxypeptidase A-catalyzed hydrolysis of ester substrates was carried out at room temperature in the presence of a number of external reagents. If the acyl-enzyme intermediate, an anhydride, is attacked by the external reagents, products formed by trapping at the acyl portion or at the enzyme portion of the anhydride group can be obtained. Examination of the uv/vis spectral properties of the reaction products and of changes in enzyme activity indicated that such trapping reactions did not occur. Also performed was evaluation of enzymatic rate parameters for the the hydrolysis of O-(o-hydroxyphenylacetyl)-L-${\beta}$-phenyllactate. Detection of 2-coumaranone possibly formed by attack of the o-hydroxy group as an intramolecular trapping group at the acyl-enzyme intermediate was tried, but no evidences for the intramolecular trapping reaction were obtained. Failure to trap the intermediate was discussed in terms of steric hindrance imposed on the approach of the trapping reagents to the anhydride group of the acyl-enzyme intermediate and of the fast enzymatic breakdown of the intermediate.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.471-482
• /
• 2011

This paper introduces an development of high-definition(HD) 3DTV experimental broadcasting system and its experimental service that has been launched via three broadcasting network including terrestrial, cable and satellite in the late of 2010. This 3DTV experimental broadcasting service employs an innovative 3DTV broadcasting mechanism, called as dual stream method in which left and right images are encoded by using each video encoder and multiplexed using MPEG-2 system technology for guaranteeing backward-compatibility with legacy DTV. This paper specifically describes the developed experimental broadcasting system, concentrating on 3DTV re-multiplexer and 3DTV receiver. Finally, implementation and terrestrial 3DTV experimental broadcasting service results will be introduced from the point of objective and subjective evaluation.

• Journal of Broadcast Engineering
• /
• v.15 no.4
• /
• pp.540-546
• /
• 2010

Since the stereoscopic 3-dimensional (3D) video that provides users with a realistic multimedia service requires twice as much data as 2-dimensional (2D) video, it is difficult to construct the fast system. In this paper, we propose a fast stereoscopic 3D broadcasting system based on the depth information. Before the transmission, we encode the input 2D+depth video using x264, an open source H.264/AVC fast encoder to reduce the size of the data. At the receiver, we decode the transmitted bitstream in real time using a compute unified device architecture (CUDA) video decoder API on NVIDIA graphics processing unit (GPU). Then, we apply a fast view synthesis method that generates the virtual view using GPU. The proposed system can display the output video in both 2DTV and 3DTV. From the experiment, we verified that the proposed system can service the stereoscopic 3D contents in 24 frames per second at most.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.122-134
• /
• 2011

The peanut-shaped cloth diaper has cut uncomfortable crotch region off the square-shaped cloth diaper into a peanut-shape, and finished the edge by bias with multi-layers of fabric. This study has the purpose on providing the basic data for designing the peanut-shaped cloth diaper. For this purpose, the peanut-shaped cloth diapers on market were collected and analyzed by their shape and size, and also the patterns and differences in making were compared. 26 products from 17 brands were collected as samples. The analysis factors are the shape and size of the peanut-shaped cloth diaper, and characteristics and patterns in making. Among the samples, only 3 diapers were straight-shaped; the rest of them were peanut-shaped. The size difference between the big and small peanut-shaped cloth diapers was very large; the total length of the small one was 36.5cm-39cm which was very common, and the total length of the big one was more than 44cm. All diapers had longer width in the back than the front. The width of the front and back was different for each sample, therefore, it seemed to have some difficulties to set the standard. The peanut-shaped cloth diaper had different make-up depending on its characteristics including. absorbance, washing and drying. It was usually made by cotton woven of diamond jacquard or knit, and finished the edge by woven bias or knit bias. The peanut-shaped cloth diapers were various including a sheet of diaper, two sheets of diapers fixed with velcro, three sheets of diapers, and etc. For the patterns of the diapers, only two samples out of all had three dimensional shape, and the rest were produced using flat shape. There were no distinction between the diapers of girls and boys. Therefore, it is necessary to make the product based on scientific data about the peanut-shaped cloth diaper.