• Journal of Veterinary Clinics
• /
• v.32 no.6
• /
• pp.491-498
• /
• 2015

We investigated the effect of constant rate infusion (CRI) with doxapram on cardiopulmonary function during total intravenous anesthesia (TIVA) with remifentanil and propofol CRI in dogs. Fifteen male Beagle dogs were randomly divided into 3 groups. All groups were premedicated with medetomidine ($20{\mu}g/kg$, IV) and anesthetized by remifentanil/propofol CRI for one and half hour. At the initiating of the anesthesia, different doses of doxapram for each group were administrated as the followings; D1 group - doxapram 0.25 mg/kg bolus followed by doxapram $8.33{\mu}g/kg/min$, D2 group - doxapram 2 mg/kg bolus followed by doxapram $66.66{\mu}g/kg/min$, control group - normal saline. The anesthetic depth for surgery was well maintained in all groups throughout the anesthetic periods. The respiratory rate was significantly higher in D2 group than that of control group (p < 0.05). The values of $PaO_2$ and $SaO_2$ were significantly increased in both D1 and D2 groups compared with control group (p < 0.05). High dose of doxapram (D2 group) significantly decreased the level of $PaCO_2$ compared with control group (p < 0.05). The values of systolic, mean and diastolic arterial pressure were significantly increased in doxapram 2 group (p < 0.05). There were no significant differences in the values of heart rate and pH of arterial blood. Therefore, doxapram CRI may be useful to alleviate the suppression of cardiopulmonary function including hypoxia and hypotension during TIVA with remifentanil and propofol in dogs.

• Journal of Veterinary Clinics
• /
• v.28 no.5
• /
• pp.479-485
• /
• 2011

The cardiopulmonary responses during total intravenous anesthesia (TIVA) between remifentanil/propofol infusion and remifentanil/ketamine infusion in dogs were compared. Fourteen healthy adult beagle dogs were premedicated with acepromazine (0.1 mg/kg, SC) and medetomidine (20 ${\mu}g$/kg, IV), and anesthetized for 3 hr with remifentanil (0.5 ${\mu}g$/kg/min)/propofol (loading dose: 1 mg/kg, CRI: 0.3 mg/kg/min) CRI (group 'P') or remifentanil/ ketamine (loading dose : 5 mg/kg, CRI: 0.1 mg/kg/min) CRI (group 'K'), respectively. Hemodynamics, blood gas analysis and behavioral changes during recovery were measured. The level of anesthesia was determined by toe-web clamping test. The level of surgical anesthesia was maintained throughout the experiment in both groups. Systolic arterial pressure, mean arterial pressure, $PaO_2$ and $SpO_2$ in group 'K' were significantly higher than in group 'P', and were maintained near the normal ranges. In addition, $PaO_2$ in group 'K' was significantly lower than in group 'P'. However, diastolic arterial pressure, heart rate and respiratory rate were not significantly differed. Mean extubation time from the end of infusion was significantly reduced in group 'K', but mean sitting time was significantly reduced in group 'P'. Mean head-up time and mean walking time were not significantly differed. In group 'K', brief muscle rigidity, head waving and licking during recovery were observed. In conclusion, infusion rate of ketamine (0.1 mg/ kg/min) with remifentanil (0.5 ${\mu}g$/kg/min) is an appropriate for obtaining the surgical plane of anesthesia. These results showed that group 'K' had better cardiopulmonary function than group 'P'. That is, remifentanil/ketamine CRI is better TIVA protocol than remifentanil/propofol CRI for 3 hr surgery.

• Korean Journal of Soil Science and Fertilizer
• /
• v.37 no.6
• /
• pp.388-395
• /
• 2004

This study was carried out to determine the application rate of pig slurry for red pepper. Field experiment was designed with non-fertilizer, chemical fertilizer recommended by soil testing (CFRST) and pig slurry treatments. In pig slurry (PS) plots, pig slurry was applied as basal fertilizer with different equivalents to nitrogen of chemical fertilizer plot (60%: PS60, 80%: PS80, 100%: PS100, 120%: PS120) and chemical fertilizer was top-dressed additionally. Soil organic matter contents after 50 day of planting and after experiment in the plots treated with PS were higher than that of CFRST plot, whereas content of $NO_3-N$ of CFRST plot was higher than that of PS plot. Growth of red pepper were lowest in the non-fertilizer plot. Plant lengths of red pepper at 50 day after planting were similar among the different treatments, plant lengths of red pepper of PS100, PS120 and CFRST at 100 day after planting were higher than those of the PS60 and PS80 plots. But Main stem and stem diameter of red pepper were not different among the treatments. Uptake rate of N, P and K by red pepper plant were 27-44, 9-16 and 41-68% for total N, $P_2O_5$ and $K_2O$, respectively. Utilization of applied fertilizer ingredient by red pepper plant were in the order of PS80> PS60> FRST> PS100> PS120. Yield of red pepper tends to increase by 3% in the PS100 compared with the CFRST, but there was not significant difference between PS120 and CFRST. Chemical component of run-off collected from the furrow of the red pepper field was not different among the treatments. Greenhouse gases ($CH_4$ and $N_2O$) emission of non-fertilizer, PS100 and CFRST during the whole red pepper growth period were 4.0, 4.8 and $5.9kg\;CH_4\;ha^{-1}$, and 0.74, 6.68 and $8.38kg\;N_2O\;ha^{-1}$. Emission of $CH_4$ and $N_2O$ in PS100 was higher than those of CFRST by 23% and 26%, respectively. In this connection, to be used the pig slurry for red pepper, it is required that pig slurry must be decomposed for six months or more. Consequently, pig slurry equivalent to nitrogen of basal fertilizer of CFRST with additional top dressing of chemical fertilizer is recommend as an optimum application rate of pig slurry for red pepper.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.31 no.4 s.54
• /
• pp.337-342
• /
• 2005

The aim of this study was to evaluate the influence of different skin care ingredient concentrations on the effect of polyols and oils on the human skin moisturization and skin surface roughness. Polyols and oils were essential ingredients to make a skin care formulation. But these were still not understood how much concentration(s) were tested on human skin in the aspect of efficacy and sensory. We studied to examine various concentrations of ingredient by cosmetic companies using noninvasive methods. Polyols were composed of glycerol and butylene glycol (BG) as 1:1 ratio, and oils were hydrogenated polydecene, cetyl ethylhexanoate and pentaerythrityl tetraethylhexanoate (PTO(R), Stearinerie Dubois Fils Co., France) as 1:1:1 ratio. All compounds were tested $0{\sim}27%dml$ Polyols and $0{\sim}35%dml$ oils in O/W emulsions. We investigated the effect of water contents and the effect of stratum corneum roughness in forearm skin after application of compounds. Water contents of the skin measured by skin capacitance and skin surface roughness measured visual scoring of skin surface biopsy through the scanning electron microscopy. Water contents of the skin were highly related to amount of polyols (to 20%) and oils (to 12%). Correlation coefficients were 0.971 and 0.985 respectively (p<0.01), 2 h after application. Skin surface roughness was positively correlated with polyol contents in concentration dependent manner, and depend on oils up to 6%. The ratio of coefficient was 2.5 to 1 (polyol to oils) by regression analysis. Further studies will be conducted with other ingredients such as surfactants, lipids and aqueous materials, and with ether methods for noninvasive measurement.

• Korean Journal of Soil Science and Fertilizer
• /
• v.40 no.6
• /
• pp.454-459
• /
• 2007

This experiment was conducted to investigate the effect of long-term continuous application of fertilizers for rice cultivation from 1954 to 2003. Changes of physical and chemical properties of paddy soil and the rice yield by continuous application of fertilizers, particularly rice straw compost, over fifty years were discussed in this paper. The rice yields of compost applied plots were 5~12% higher while those of no fertilizer plots were 21~38% lower compared to those of NPK fertilizers applied plots. Uptakes of T-N, $P_2O_5$, $K_2O$, CaO, MgO, and $SiO_2$ by rice plants were significantly increased by the application of straw compost. Bulk density, hardness, and liquid phase of soil in compost applied plots were significantly decreased while gaseous phase and cation exchange capacity (CEC) of soil were increased compare to those in NPK plots. When the bulk density of soil was increased the rice yield was decreased. The soil organic matter (SOM) content tended to increase in compost applied plots whereas no significant differences were found in other treatments. The soil organic matter content increased by $0.4g\;kg^{-1}\;yr^{-1}$ when $7.5Mg\;ha^{-1}\;yr^{-1}$ of rice straw compost applied in paddy land. The compost application rate recommendation for rice cultivation in Korea could be revised by the results of this study.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.871-877
• /
• 2018

Storing the surplus energy from renewable energy resource is one of the challenges related to intermittent and fluctuating nature of renewable energy electricity production. $CO_2$ methanation is well known reaction that as a renewable energy storage system. $CO_2$ methanation requires a catalyst to be active at relatively low temperatures ($250-500^{\circ}C$) and selectivity towards methane. In this study, the catalytic performance test was conducted using a pressurized bubbling fluidized bed reactor (Diameter: 0.025 m and Height: 0.35 m) with $Ni/{\gamma}-Al_2O_3$ (Ni70%, and ${\gamma}-Al_2O_3$30%) catalyst. The range of the reaction conditions were $H_2/CO_2$ mole ratio range of 4.0-6.0, temperature of $300-420^{\circ}C$, pressure of 1-9 bar, and gas velocity ($U_0/U_{mf}$) of 1-5. As the $H_2/CO_2$ mole ratio, temperature and pressure increased, $CO_2$ conversion increases at the experimental temperature range. However, $CO_2$ conversion decreases with increasing gas velocity due to poor mixing characteristics in the fluidized bed. The maximum $CO_2$ conversion of 99.6% was obtained with the operating condition as follows; $H_2/CO_2$ ratio of 5, temperature of $400^{\circ}C$, pressure of 9 bar, and $U_0/U_{mf}$ of 1.4-3.

• Journal of the Korean Electrochemical Society
• /
• v.24 no.3
• /
• pp.65-75
• /
• 2021

Coin cell is a basic testing platform for battery research, discovering new materials and concepts, and contributing to fundamental research on next-generation batteries. Li metal batteries (LMBs) are promising since a high energy density (~500 Wh kg^-1) is deliverable far beyond Li-ion. However, Li dendrite-triggered volume fluctuation and high surface cause severe deterioration of performance. Given that such drawbacks are strongly dependent on the cell parameters and structure, such as the amount of electrolyte, Li thickness, and internal pressure, reliable Li metal coin cell testing is challenging. For the LMB-specialized coin cell testing platform, this study suggests the optimal coin cell structure that secures performance and reproducibility of LMBs under stringent conditions, such as lean electrolyte, high mass loading of NMC cathode, and thinner Li use. By controlling the cathode/anode (C/A) area ratio closer to 1.0, the inactive space was minimized, mitigating the cell degradation. The quantification and imaging of inner cell pressure elucidated that the uniformity of the pressure is a crucial matter to improving performance reliability. The LMB coin cells exhibit better cycling retention and reproducibility under higher (0.6 MPa → 2.13 MPa) and uniform (standard deviation: 0.43 → 0.16) stack pressure through the changes in internal parts and introducing a flexible polymer (PDMS) film.

• Membrane Journal
• /
• v.32 no.4
• /
• pp.235-252
• /
• 2022

Forward osmotic pressure-free reverse osmosis (Δ𝜋=0 RO) was invented in 2013. The first patent (US 9,950,297 B2) was registered on April 18, 2018. The "Osmotic Pressure of Concentrated Solutions" in JACS (1908) by G.N. Lewis of MIT was used for the estimation. The Chang's RO system differs from conventional RO (C-RO) in that two-chamber system of osmotic pressure equalizer and a low-pressure RO system while C-RO is based on a single chamber. Chang claimed that all aqueous solutions, including salt water, regardless of its osmotic pressure can be separated into water and salt. The second patent (US 10.953.367B2, March 23, 2021) showed that a low-pressure reverse osmosis is possible for 3.0% input at Δ𝜋 of 10 to 12 bar. Singularity ZERO reverse osmosis from his third patent (Korea patent 10-22322755, US-PCT/KR202003595) for a 3.0% NaCl input, 50% more water recovery, use of 1/3 RO membrane area, and 1/5th of theoretical energy. These numbers come from Chang's laboratory experiments and theoretical analysis. Relative residence time (RRT) of feed and OE chambers makes Δ𝜋 to zero or negative by recycling enriched feed flow. The construction cost by S-ZERO was estimated to be around 50~60% of the current RO system.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.216-217
• /
• 2022

Gulpur 수력발전 프로젝트는 전력난을 겪고 있는 파키스탄에 102 MW 규모의 수력발전소를 건설하여 30년 동안 운영 관리한 후 파키스탄 정부로 양도하는 IPP(Independent Power Producing) 형식의 투자사업이다. 남동발전과 DL E&C, 롯데건설이 Sponsor로서 출자한 자본금과, ADB, IFC, K-EXIM 등의 대주단로부터의 차입금을 재원으로 하여 소요 사업비를 조달하고 사업을 개발하였다. DL E&C와 롯데건설이 EPC(Engineering, Procurement, Construction)를 수행하였고, 이산이 Design consultant의 역할을 수행하였다. Gulpur 수력발전 프로젝트의 발전형식은 수로식(run-of-river)으로 201 m³/s의 발전유량과 102 MW의 발전 시설용량을 이용하여 연평균예상발전량은 398 GWh이다. 주요 구조물로는 설계 재현빈도 1년의 유수전환시설(가물막이댐 & 가배수터널)과 콘크리트 중력식댐(H 67 m, L 205 m), 도수터널(D 6.7 m, L 215 m, 2기), 옥외형 발전소 (H 51 m, W 60 m, L 38 m, Kaplan 2기)가 있으며, 2015년 10월 착공하여 2020년 3월 상업발전을 시작하였다. 본 프로젝트는 DL E&C의 첫 번째 EPC 해외수력발전 프로젝트이다. 따라서 프로젝트의 성공적 수행을 위한 경제적 설계, 시공의 효율성 및 안정성 확보 등을 위하여 많은 연구를 수행하는 과정에서 다양한 기술 개선을 이룰 수 있었다. 본고에서는 Gulpur 프로젝트를 통하여 도출된 성공 사례들을 소개 및 공유하고자 한다. 첫 번째로 콘크리트 중력식댐 시공을 위한 유수전환시설의 최적 설계빈도를 산정하였다. 일반적으로 유수전환시설의 규모는 설계기준에 제시된 설계 재현빈도를 이용하는데, 해외 설계기준에서는 10년, 국내 설계기준에서는 1~2년으로 다르게 제시되어 있는 문제점이 있다. 유수전환시설의 규모는 프로젝트의 경제성에 큰 영향을 미치기 때문에 최적 설계빈도의 결정이 필요하며, 위험도분석기법(Risk Analysis)과 기대화폐가치법(Expected Monetary Value)을 이용하여 유수전환시설의 최적 설계 재현빈도와 이에 영향을 미치는 인자를 분석하였다. 위험도는 몬테카를로 시뮬레이션으로 산정된 가물막이댐 파괴확률과 재현빈도를 이용하여 산정된 가물막이댐 월류확률을 고려하였으며, 비용 및 피해액으로는 유수전환시설의 공사비, 가물막이댐 파괴시의 재건설비용과 지체보상금, 가물막이댐 월류시의 복구비용을 고려하였다. 이에 대한 연구결과로, 유수전환시설의 사용기간과 월류시의 복구비용이 유수전환시설의 설계 재현기간 결정에 가장 큰 영향을 미치는 것으로 나타났고, 특히 월류시의 복구비용이 작을수록 낮은 설계 재현빈도를 선택하는 것이 타당한 것으로 나타났다. 예를 들어, 유수전환시설의 사용기간이 3 ~ 5년, 복구비용이 0.5 ~ 1.0 mil USD 이하인 조건에서 가물막이시설의 최적 설계빈도는 1년 ~ 2년인 것으로 나타났다. 또한, 유수전환시설의 사용기간은 본댐의 규모와 시공기간 등을 고려하여 결정되는 사항으로 설계자가 임의 조정할 수 없지만, 복구비용은 시공 관리자에 따라 결정되는 부분으로, 적극적 홍수 피해 저감 및 복구방안을 마련하는 것이 프로젝트의 경제성을 향상시킬 수 있다는 것을 알 수 있었다. 두 번째로 프로젝트의 경제성 향상, 홍수기 댐 시공시의 안전성 확보를 위하여 홍수 조기경보시스템(Early Warning System)을 개발 및 활용하였다. 수로식(Run-of-river) 수력발전댐은 대부분 산악지역에 위치하기 때문에 국지성 강우 및 급한 지형 경사로 인하여 돌발홍수(flash flood)의 발생 가능성이 높다. 따라서 시공 중 홍수(월류) 발생을 미리 감지하고 현장에 전파할 수 있는, 수로식(Run-of-river) 수력발전댐 현장을 위한 홍수 조기경보시스템이 필요하며, 이를 리스크 인식, 모니터링 및 경보, 전파 및 연락, 반응 능력 향상의 4가지 부분으로 나누어 구축하였다. 리스크 인식 부분에서는 가물막이댐 월류 발생 상황에 대한 위험도, 취약성, 리스크를 제시하였으며, 모니터링 및 경보 부분에서는 상류 측정수위에서 유도된 현장 예상수위와 실제 현장 측정 수위를 대상으로 경보홍수위와 위험홍수위로 나누어 관리하였다. 전파 및 연락 부분에서는 현장 시공 조직을 활용하여 홍수시를 대비한 비상연락체계도(Emergency communication flow chart)를 운영하였으며, 반응 능력 향상을 위해 비상연락체계도의 팀별 Action plan을 상세화 하였다. 세 번째로 현장의 지질특성과 50여 차례 발파시험으로 현장 고유의 발파진동감쇄곡선을 도출하였으며, 이를 통해 현장의 시공성과 콘크리트 품질 확보를 동시에 달성할 수 있는 방안을 제시하였다. 콘크리트댐 공사에서는 제한된 공기 내에 공사를 완료하기 위해 사면부 굴착과 콘크리트 타설이 동시에 수행될 수밖에 없는 문제점을 가지고 있다. 그러나 신규 콘크리트 타설면 근처에서 발파를 수행하는 경우 발파로 발생되는 탄성파가 일정 수준을 초과하게 되면, 콘크리트 양생에 영향을 주게 된다. 따라서 다수의 현장 발파시험을 통해 발파거리와 최대진동속도의 상관관계 즉, 발파진동감쇄곡선을 도출함으로써 현장의 발파진동특성을 도출할 수 있었다. 또한, 기존 연구 논문들을 통해 콘크리트 재령기간 별 안전진동속도를 선정하고, 해당 안전진동속도를 초과하지 않는 범위에서 콘크리트 타설면과 발파위치의 거리에 따라 1회 발파 가능한 장약량을 산정하여 적용하였다. 이와 같은 체계적인 접근을 통해 콘크리트 타설과 발파 작업 동시 수행에 대한 논란을 해소할 수 있었다.

• Journal of the Korean Institute of Gas
• /
• v.27 no.3
• /
• pp.19-26
• /
• 2023

Hydrogen, a clean energy source free of COx emissions, is poised to replace fossil fuels, with its usage on the rise. Despite its high energy content per unit mass, hydrogen faces limitations in storage and transportation due to its low storage density and challenges in long-term storage. In contrast, ammonia offers a high storage capacity per unit volume and is relatively easy to liquefy, making it an attractive option for storing and transporting large volumes of hydrogen. While NH₃ decomposition is an endothermic reaction, achieving excellent low-temperature catalytic activity is essential for process efficiency and cost-effectiveness. The study examined the effects of different zeolite types (5A, NaY, ZSM5) on NH₃ decomposition activity, considering differences in pore structure, cations, and Si/Al-ratio. Notably, the 5A zeolite facilitated the high dispersion of Ni across the surface, inside pores, and within the structure. Its low Si/Al ratio contributed to abundant acidity, enhancing ammonia adsorption. Additionally, the presence of Na and Ca cations in the support created medium basic sites that improved N₂ desorption rates. As a result, among the prepared catalysts, the 15 wt%Ni/5A catalyst exhibited the highest NH₃ conversion and a high H₂ formation rate of 23.5 mmol/g_cat·min (30,000 mL/g_cat·h, 600 ℃). This performance was attributed to the strong metal-support interaction and the enhancement of N₂ desorption rates through the presence of medium basic sites.