• Analytical Science and Technology
• /
• v.24 no.1
• /
• pp.1-9
• /
• 2011

We described an estimation of measurement uncertainty in quantitative analysis of 11-nor-9-carboxy-${\Delta}^9$-tetrahydrocannabinol (THC-COOH), the metabolite of ${\Delta}^9$-tetrahydrocannabinol, in hair samples by using the bead-assisted liquid-liquid extraction and gas chromatography-tandem mass spectrometric (GC-NCI-MS/MS) detection. Traceability of measurement was established through the use of reference materials, calibrated volumetric tubes, volume measuring devices, and measuring instruments. The analytical results were compared and the different contributions to the uncertainty were evaluated. Inter-day variation was performed by using statistical analysis of several indicative factors. Measurement uncertainty associated with the analyte in real forensic hair samples were estimated using QC data. The major factor of contribution to combined standard uncertainty was inter-day repeatability, while those associated with preparation of analytical standard and also sample of weight were insignificant considering the degree of contribution. Relative uncertainty of relative extended standard uncertainty divided into the measured concentration of the analyte was 17% in a hair sample. The uncertainty of result evaluation will be invaluable to improve quality of the analysis.

• Journal of Life Science
• /
• v.10 no.5
• /
• pp.475-483
• /
• 2000

Normally, aerobic cells are protected from the damage of free radicals by antioxidative enzymes such as catalase, superoxide dismutase (SOD), glutathione (GSH) peroxidase and GSH-S-transferase. In this study, we have investigate the effect of egg yolk protein hydrolysates on antioxidative activity and the activity of antioxidative enzyme in cultured hepatocytes (Chang). Without the pretreatment with hydrolysate, about 50% of the hepatocytes were killed within 2h by 225$\mu$M tert-butyl hydroperoxide (t-BHP). By contrast, fewer than 20% of the 5 K hydrolysate (permeate from 5 kDa membrane and not passed through 1 kDa membrane)-pretreated hepatocytes were killed by the same concentrations of t-BHP. In addition, the activities of catalase, GSH peroxidase and GSH-transferase were significantly increasing with the treatment of 5 K hydrolysate. These results suggest that 5 K hydrolysate exerts antioxidative effect by increasing activity of antioxidative enzymes.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10d
• /
• pp.366-371
• /
• 2007

무선 센서 네트워크는 경제적, 환경적 목적으로 다양한 방면에서 활용되고 있다 이 때, 배치된 각 센서의 위치를 파악하는 것은 센서 네트워크에서 가장 기본적이며 가장 중요한 문제 중의 하나이다. 기존 논문에서 제안된 센서 위치 측정 방법은 특별한 장비를 장착하거나 특정한 환경의 지역에 한정시킨 방범으로 제한하고 있는 경우가 대부분이다. 하지만 어떠한 관심 지역의 환경은 언제라도 바뀔 수 있다. 또한, 센서가 위치할 환경의 기온, 풍속 등을 미리 안다는 것은 비현실적인 가정이다. 더구나 각각의 센서에 특별한 장비를 장착한다는 것은 비용 절감을 이유로 센서 네트워크를 운영하는 경우 오히려 그것을 이용하지 않는 경우보다 비용이 더 들 수도 있다. 이에 본 논문에서는 센서 노드의 기본적인 통신 기능은 이용하여, 환경에 순응적으로 센서의 위치를 측정할 수 있는 방법을 제안하고자 한다. 센서 노드에서 기본적으로 제공하는 통신 기능은 RF 전파를 보낼 때 전송 레벨을 달리하여 보낼 수 있다. 이러한 기본적인 기능을 이용하여 위치를 측정하게 되면 전체적인 센서 네트워크의 비용이 절감될 뿐만 아니라 환경에 순응적인 위치 측정이 가능하게 된다. 또한, 각 노드의 위치가 정해진 후 다른 노드와 통신할 때 전파의 세기를 조정함으로써 RF 통신에서 소모되는 전력량을 줄일 수 있다. 따라서 본 논문에서 제안하는 전송 레벨을 이용한 위치 측정 방법은 단순히 위치를 측정한다는 의미뿐 아니라 환경에 순응적으로 작동한다는 장점이 있다. 향후 네트워크 내에서 통신에 소비되는 전력을 줄일 수 있다는 점에서도 중요한 의미를 지닌다.를 집행하는 caspase의 활성 형태인 cleaved caspase-8, -9, -7, -3의 단백질 수준이 목향 헥산추출물의 처리에 의해 증가하였고 caspase-3의 표적 단백질 중 하나인 PARP의 불활성 형태인 cleaved PARP의 단백질 수준도 현저하게 증가하였다. 이 결과들은 목향 헥산 추출물이 LNCaP 세포의 apoptosis를 유도함으로써 전립선 암세포의 증식을 억제함을 보여주는 것이며 목향 헥산추출물에 의한 apoptosis 유도는 caspase 활성 증가와 Bak 및 t-Bid 단백질의 증가에 의한 것임을 제시한다. 따라서 앞으로 항암효과를 나타내는 성분의 동정 및 동물실험을 통하여 좀 더 면밀한 기전 연구가 수행된다면 목향 헥산추출물은 화학적 암예방 물질이나 치료제로 개발될 수 있을 것으로 사료된다.적 분해층과 마모질이가 가장 깊은 것으로 나타났으며 flowable type의 복합레진과 컴포머는 표면 경도와 마모도에서 양호한 결과를 보였다. 이상의 결과 복합레진과 컴포머의 평가요소로서 마모도와 함께 가수분해도 고려되어야 할 것으로 사료된다.증후군 환자에서 대조군에 비해 높은 비율을 보였다.er thinning은 3 군모두에서 관찰되었고 항암 3 일군이 가장 심하게 나타났다. 이상의 실험결과를 보면 술전 항암제투여가 초기에 시행한 경우에는 조직의 치유에 초기 5 일정도까지는 영향을 미치나 7 일이 지나면 정상범주로 회복함을 알수 있었고 실험결과 항암제 투여후 3 일째 피판 형성한 군에서 피판치유가 늦어진 것으로 관찰되어 인체에서 항암 투여후 수술시기는 인체면역계가 회복하는 시기를 3

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.6
• /
• pp.117-123
• /
• 2010

If FRP materials that have been known as high durability materials are exposed to harmful environmental factors, deterioration and characteristics of materials can be reduced due to chemical reaction such as hydrolysis. Therefore, to use FRP materials as building major materials, it is important to exactly grasp dynamic properties by use condition. Accordingly, this study stored FRP materials in a strong acid and alkali compound solution for a certain period to conduct simulation for acute or chronic, extreme changes by chemicals, and conducted a test for compressive, tensile, shear and bending strength to analyze changes in strength by kinds and storage days of chemicals. In conclusion, the study findings indicate excellent chemical resistance of FRP materials.

• Korean Chemical Engineering Research
• /
• v.55 no.3
• /
• pp.385-394
• /
• 2017

In this study, reaction mechanism and curing characteristics of adhesives formulated with NaOH- and $H_2SO_4$-hydrolyzed chicken feather (CF) and formaldehyde-based crosslinkers were investigated by FT-IR and DSC. In addition, adhesive properties and formaldehyde emission of medium-density fiberboards (MDF) applied with the adhesives were measured. CF-based adhesives having a solid content of 40% and over were very viscous at $25^{\circ}C$, but the viscosity reduced to $300{\sim}660m{\cdot}Pa{\cdot}s$ at $50^{\circ}C$. Consequently, the adhesives could be used as a sprayable resin. Through the FT-IR spectra of liquid and cured CF-based adhesives, addition reaction of methylol group and condensation reaction between the functional groups with the use of formaldehyde-based crosslinkers were identified. From the analysis of DSC, it was elucidated for CF-based adhesives to require a higher pressing temperature or longer pressing time comparing to commercial urea-formaldehyde (C-UF) resin. MDF bonded with CF-based adhesives, which was formulated with 5% NaOH-hydrolyzed CF (CF-AK-5%) and PF of formaldehyde to phenol mole ratio of 2.5 (PF-2.5), and pressed for 8 min had higher MOR and IB than those with other CF-based adhesives. MOR and IB of MDF bonded with the CF-based adhesives regardless of formulation type and pressing time were higher than those with C-UF resin. When the values compared with the minimum requirements of KS standard, IB exceeded the KS standard in all formulations and pressing time, but MOR of only MDF bonded with CF-AK-5% and PF-2.5 and pressed for 8 min satisfied the KS standard. What was worse, 24-TS of MDF bonded with all CF-based adhesives did not satisfied the KS standard. However, MOR and 24-TS can be improved by increasing the target density of MDF or the amount of wax emulsion, which is added to improve the water resistance of MDF. Importantly, the use of CF-based adhesives decreased greatly the formaldehyde emission. Based on the results, we reached the conclusion that CF-based adhesives formulated under proper conditions had a potential as a sprayable resin for the production of wood panels.

• The Korean Journal of Pesticide Science
• /
• v.4 no.2
• /
• pp.21-28
• /
• 2000

A new fourty six 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)-N-phenylpro- pionamide derivatives were synthesized and the herbicidal activities against rice plant and barnyard grass with pre-emergence in down land were measured. The structure activity relationships (SAR) between the activities and physicochemical parameters of the substituted(X) N-phenyl group in substrates were analyzed and discussed by Free- Wilson and Hansch method from the basis on the former study (Sung. et. al., 1999). The conditions of selective herbicide activity both the barnyard grass and rice plant are shown that the optimal hydrophobicity, $({\pi})_{opt.}=1.34$ and electron donating with field effect (F<0) of meta and ortho, para-substituted mono or disubstituent on the N-phenyl ring were found to contribute significantly. The herbicidal activities against barnyard grass are roughly the same as the results in up land whereas damage to rice plant in down land more increase than that of up land. Degradation products in water are 2-(4-(6-chloro-2-benzoxazolyloxy)phenoxy)propionic acid ((A)) (obs. pKa=4.35 & obs. logP=4.77) and 6-chloro-2-benzoxazolone (B) (obs. pKa=8.40 & obs. logP=2.90). These results were supposing that the hydrolysis product of substrates, (A) is comparatively absorbed in rice plant but not in barnyard grass. And it is assumed from the SAR equations that the 2,6-dimethyl-4-methoxymethyl group substituent ($pI_{50}=5.41$, 3g/ha) is selected as the most highest herbicidal activity against barnyard grass in green house.

• Membrane Journal
• /
• v.17 no.1
• /
• pp.54-60
• /
• 2007

In this research, the cation-exchange membrane (SS membrane) containing sulfonic acid group was prepared by radiation induced grafted polymerization onto a porous hollow fiber membrane to effectively remove ammonia which was produced by urea decomposition for peritoneum dialysis system. And the metal ionic cross-linking cation-exchange membrane (SS-M membrane) was prepared by the adsorption of metallic ions (Cu, Ni, Zn) to the SS membranes. The pure water flux and adsorption capacities of ammonia to SS and SS-M membranes were examined. The pure water flux of SS membrane decreased rapidly with the density of $SO_3H$ group increasing. As the metallic ions were adsorbed to the SS membrane, the pure water flux was increased. The adsorption capacities of ammonia at the SS membrane increased with increasing of density of $SO_3H$ group. The ion-exchange capacity of ammonia of the SS membrane was approximately proportional 1 : 1 to the density of $SO_3H$ group. The SS membrane had higher adsorption capacities than the SS-M membrane. The highest adsorption capacities of SS and SS-M membrane appeared the highest pH 9.

• Korean Journal of Soil Science and Fertilizer
• /
• v.27 no.4
• /
• pp.263-268
• /
• 1994

Field microplot(D 20cm, L 85cm) experiment filled with Bonryang sandy loam soil(Typic Udifluvents) was conducted to obtain quantitative information on the change of soil pH under different soil moisture regime and ladino clover cultivation, and the movement of applied nutrient under the rainfed bare soil condition. Slaked lime increased soil pH of the applied layer. $NH_4-N$ evolved from urea hydrolysis was more effective in raising the subsoil pH rather than the exchangeable Mg and Ca. Under the different soil miosture condition downward movement of Cl and $NO_3-N$ lowered subsoil pH during the middle of ladino clover growth. Leaching of CI and $NO_3-N$ down to the out of the soil microplot and increasing movement of Ca and Mg into the subsoil produced. a slight increase of subsoil pH during the late crop growth. The mean downward movement of applied nutrient 5.5 months after field installation of microplot in the bare soil under rainfed condition(1207mm) was in the order : Cl= more than 80.0>Inorganic nitrogen= 75.8>K= 67.3>Mg=62.7>Ca=18.1>P=2.3cm respectively.

• Journal of the Mineralogical Society of Korea
• /
• v.17 no.1
• /
• pp.37-47
• /
• 2004

Sulfates such as alunite and schwertmannite formed under oxidation condition play a important role in geochemical processes taken place at waste dumps and a creek from Dalseong mine, Daegu. Water chemistry shows pH decreases from upstream toward downstream creek, mainly due to formation of schwertmannite that is the most abundant phase along the creek. The removal of Al from the creek is preferentially attributed to formation of Al-bearing minerals and Al-sulphates. Among them, alunite is the most important Al-sink phase that occurs at higher pH than $pK_1$, Al hydrolysis constant. With high saturation index, alunite formed at the creek has a spherical form, commonly associated with schwertmannite. Secondary minerals formed on the surface of altered or weathered surfaces of heavy metals from the wasted dump that underwent severe oxidation, where alunite has characteristic habits which are spheric, radiating, and botrytis-like aggregates. Natroalunite occurs in association with alunite, or as mixtures of both of them. Because the pH decreases with distance due to formation of schwertmannite, although total contents of dissolved ions slowly lessen at least in the AMD, it is expected that the minerals precipitated at the creek can be exposed to subsequent dissolution, which may induce possible environmental problems.

• Journal of the Korean Wood Science and Technology
• /
• v.41 no.4
• /
• pp.293-301
• /
• 2013

This study discusses the feasibility of coffee bean residue as a raw material of medium-density fiberboard (MDF). In this relation, the effect of coffee bean residue known as an absorbent material on the physical and mechanical properties of MDF manufactured at its different addition level. Coffee bean residue which is a by-product of coffee mill and large amount of waste left over after processing for instant coffee was added at the level of 3, 6, and 9% on dry basis and urea formaldehyde resin was used as the adhesive. The MDF made with mixture of wood fiber and coffee bean residue was tested for physical and mechanical properties as well as formaldehyde emission. The bending strength and internal bonding strength of the MDF made with mixture of wood fiber-coffee bean residue were higher than that of the KS standard in randomized mat structure type, but not in layered mat structure type. Also, the physical properties of MDF made with mixture of wood fiber-coffee bean residue showed a considerable improvement in thickness swelling over the commercial MDF. More importantly, the formaldehyde emission rate of MDF made with mixture of wood fiber-coffee bean residue met the KS standard and was close to that of commercial MDF. These results showed the feasibility of coffee bean residue as a raw material for the production of environmentally-friendly MDF. Additional works on adhesive-coffee bean compatibility, improvement of moisture absorption effect and reduction the formaldehyde emission rate by carbonization of coffee bean residue may be required.