• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.5
• /
• pp.583-586
• /
• 2004

Transition jitter noise is one of major sources of detection errors in high density recording channels. Implementation complexity of the optimal detector for such channels is high due to the data dependency and correlated nature of the jitter noise. In this paper, two types of hardware efficient sub-optimal detectors are derived by modifying branch metric of Viterbi algorithm and applied to partial response (PR) channels combined with run length limited modulation coding. The additional complexity over the conventional Viterbi algorithm to incorporate the modified branch metric is either a multiplication or an addition for each branch metric in the Viterbi trellis.

• Journal of the Korean Society for Railway
• /
• v.11 no.4
• /
• pp.390-397
• /
• 2008

Quantitative RAM (Reliability, Availability, Maintainability) is the one of the important indicator that shows the quality of rolling stock. It is usually required in the domestic and abroad purchase specification of rolling stock. And achieving and demonstrating the quantitative RAM goals is also required. In this study, the method to set up these goals will be proposed in the aspects of service and logistic reliability, operational, achievement or inherent availability and maintainability. And we apply this proposed method to the real operation data.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1992.10a
• /
• pp.71-76
• /
• 1992

축정렬이 불량한 경우 축진동이 과도하게 발생하여 출력이 감소하고 소음이 발생하며, 심한 경우 회전체의 파손과 같은 손실을 입을 수 있다. 특히 축 정렬불량으로 인한 진동은 교정이 안되는 것이 특징이므로 근본적으로 진동 을 해결하기 위해서는 축 정렬을 다시 시행해야 한다. 그러나 터빈은 다른 기계 구조물과 달리 분해 점검에 많은 시간과 경비가 요구되므로 축 정렬시 정확한 작업이 요구된다. 본 연구에서는 터빈계통의 축정렬을 수행하는 절차 와 방법에 대해서 검토하였다. 이를 위해 축정렬이 입력데이터로 쓰일 수 있 는 상태측정방법중 커플링 원주와 커플링 면 측정방법이 설명되었으며, 측정 값으로부터 축정렬을 수행하기 위해, 베어링의 이동량 계산과정과 쉼 가감량 의 계산방법을 기술하였다. 축정렬의 원리와 방법의 적용과정을 실제로 알아 보기 위해 평택화력 1,2호기에 대한 축정렬이 수행되었다. 1,2호기는 고압터 빈, 2단계의 저압터빈 및 발전기로 구성되어 있는 다축 시스템으로서, 제작 사측에서 요구하는 정렬 기준값을 감안하여 축정렬에 필요한 베어링 조정량 을 계산하였다. 계산과정은 기준로터로 지정된 저압터빈에서부터 축정렬상태 도를 작성하여 가면서 단계적으로 설명되었으며, 최종적으로 쉼의 가감량까 지를 보여줌으로서 축정렬과정을 완료하였다.

• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.125-132
• /
• 2012

In an islanded operation mode of a microgrid, load shedding is used to balance between the power supplied and the power demanded. The conventional load-shedding schemes have considered that a load uses a continuous range of values to present its load demand. However, in reality, some loads use integer and discrete values. We design a multi-agent system for the load shedding with consideration of the discrete characteristic of load demands. Besides, we define a control architecture, functionalities of agents, and interactions among agents for implementation of the system. Through experiments in various test scenarios, we show the feasibility and performance of the system.

• Convergence Security Journal
• /
• v.15 no.5
• /
• pp.29-35
• /
• 2015

The network security encryption type is divided into two, one is point-to-point, second method is link type. The level of security quality attributes are a system security quality requirements in a networked environment. Quality attributes can be observed and should be able to be measured. If the quality requirements can be presented as exact figures, quality requirements are defined specifically setting quality objectives. Functional requirements in the quality attribute is a requirement for a service function which can be obtained through the encryption. Non-functional requirements are requirements of the service quality that can be obtained through the encryption. Encryption quality evaluation system proposed in this study is to derive functional requirements and non-functional requirements 2 groups. Of the calculating measure of the evaluation index in the same category, the associated indication of the quality measure of each surface should be created. The quality matrix uses 2-factor analysis of the evaluation for the associated surface quality measurements. The quality requirements are calculated based on two different functional requirements and non-functional requirements. The results are calculated by analyzing the trend of the average value assessment. When used this way, it is possible to configure the network security encryption based on quality management.

• Journal of Korean Society for Geospatial Information Science
• /
• v.7 no.2 s.14
• /
• pp.143-153
• /
• 1999

GIS have become easier to use and very popular. In recent year digital photogrammetric systems ire becoming cost-effective tools to build and update GIS databases. In close-range photogrammetry for the acquisition of geospatial data, the bundle adjustment needs both initial approximate values and control points to solve the exterior orientation parameters. This paper gives a review of applied and potential algorithms for estimating Initial approximate values before the bundle adjustment, develope new algorithms for determine the exterior orientation parameters, and gives a cost-effective methods for close-range digital photogrammetric system Modifications of existing DLT algorithm were made in this study for providing an efficient, economic, and more accurate photogrammetric data reduction technique. These modifications include robust approaches for automatic detection and elimination of all lands of gross errors in the measurement data, and incorporation of GPS to reduce the number of control points necessary for a DLT solution. Also, this paper derives a new method for space resection from a monocular image. A major advantage of proposed method is that the solution can be uniquely and analytically determined without initial approximate values of exterior orientation parameters and without iterative computation.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.20 no.1
• /
• pp.41-50
• /
• 2010

This paper proposes a mutual identification and session key exchange scheme in secure vehicular communication based on the group signature. In VANETs, security requirements such as authentication, conditional privacy, non-repudiation, and confidentiality are required to satisfy various vehicular applications. However, existing VANET security methods based on the group signature do not support a mutual identification and session key exchange for data confidentiality. The proposed scheme allows only one credential to authenticate ephemeral Diffie-Hellman parameters generated every key exchange session. Our scheme provides a robust key exchange and reduces storage and communication overhead. The proposed scheme also satisfies security requirements for various application services in VANETs.

• Journal of the Korean BIBLIA Society for library and Information Science
• /
• v.35 no.1
• /
• pp.127-148
• /
• 2024

This study aimed to propose considerations for attributes and their standardization strategies during the data collection process for electronic publications by domestic distributors for the National Library of Korea. The research identified a total of 21 essential and optional attributes based on a survey and a Focused Group Interview (FGI) with the staff responsible for legal deposit and acquisition tasks at the National Library of Korea. Additional attributes were found necessary during the data quality verification process, leading to the specification of essential and optional attributes for various types of materials, including eBooks, audiobooks, webtoons, and web novels. The standardization of attribute values, essential for enhancing the identifiability and management efficiency of electronic publications, included adherence to ISO 8601 rules for dates and times, clear designation of limited-range attribute values such as file format and adult content, and detailed description of information related to titles. Furthermore, the study highlighted the need for establishing standardized metadata requirements and continuous data quality management and monitoring systems.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.200.2-200.2
• /
• 2015

모바일 기기의 성장세로 인해 낸드 플래시 메모리에 대한 수요가 급격히 증가하면서 높은 집적도의 소자에 대한 요구가 커지고 있다. 그러나 소자의 크기가 작아지면서 비례 축소로 인한 게이트 누설 전류, 셀간 간섭, 단 채널 효과 등과 같은 문제들이 발생한다. 이에 따라 제한된 공간에서의 coupling ratio값이 증가해야 하는 문제가 주목 받으면서 얇은 절연층에 대한 많은 연구가 진행되고 있다. 본 연구에서는 절연층 구조를 비대칭으로 사용한 낸드 플래시 메모리의 누설전류의 변화와 coupling ratio값의 변화를 관찰하였다. 비대칭 절연층 구조를 가지는 낸드 플래시 메모리의 전기적 특성을 멀티 오리엔테이션 모델을 포함한 3차원 TCAD 시뮬레이션을 이용하여 계산하였다. 메모리 소자가 각 셀 간의 절연층을 가질 때 낮은 셀 간 간섭과 높은 coupling ratio 값을 가진다. 절연층의 구조 높이와 방향의 두께가 증가 할수록 게이트 누설 전류의 값이 크게 줄어들었다. 또한 비대칭 절연층 구조의 플래시 메모리에서 플로팅 게이트의 on-current 레벨과 전위 값이 기존의 플래시 메모리에 비해 크게 나타나는 시뮬레이션 결과값을 관찰하였다. 비대칭 절연층 구조를 가지는 플래시 메모리는 게이트 누설 전류에 영향을 미치는 절연층 주위의 전기장의 값이 기존 구조에 비해 약 30% 감소하였고 같은 프로그램 동작 전압에서 플로팅 게이트에 주입되는 전하의 양 또한 증가하였다. 이 연구 결과는 낸드 플래시 메모리 소자에서 게이트 누설 전류 문제를 감소시키고 프로그램 특성을 증진시키는데 도움이 된다.

• Proceedings of the KIPE Conference
• /
• 1999.07a
• /
• pp.62-64
• /
• 1999

전자식안정기 설계에 있어서 중요한 램프의 모델링의 연구이며 이 모델은 기존의 방식에서 요구되는 많은 측정값에 의한 방식과는 달리 2개의 파라메터에 의해 결정되는 장점이 있다. 또한 DSPICE로 구현이 용이하므로 시뮬레이션을 통해서 안정기 회로의 L, C값의 초기값을 선택하는데 유용한 방법이 될 수 있다.