• Korean Journal of Optics and Photonics
• /
• v.13 no.3
• /
• pp.204-208
• /
• 2002

We investigate the dependence of indium tin oxide (ITO) thin films on the mixing ratio of Ar:O$_2$ produced by an ion-gun and $O_2$ injected inside the divergence angle of the ion-beam to optimize their sheet resistance and transmittance. The substrate is placed outside the divergence angle, and the films are grown by ion mixing with ITO evaporated at room temperature. From the XRD measurement ITO films are found to be amorphous. ITO thin films show the highest transmittance of 85% at 3$\times$10$^{-5}$ Torr of 0$_2$ and Ae:O$_2$ ratio of 40:60, and the smallest sheet resistance of 132 $\Omega$/$\square$at 1$\times$10$^{-5}$ Torr of $O_2$ and As:O$_2$ ratio of 40:60.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.140-152
• /
• 2017

This Paper is for A study of sensor fusion using Radar sensor and Vision sensor in moving object detection. Radar sensor has some problems to detect object. When the sensor moves by wind or that kind of thing, it can happen to detect wrong object like building or tress. And vision sensor is very useful for all area. And it is also used so much. but there are some weakness that is influenced easily by the light of the area, shaking of the sensor device, and weather and so on. So in this paper I want to suggest to fuse these sensor to detect object. Each sensor can fill the other's weakness, so this kind of sensor fusion makes object detection much powerful.

• Journal of the Korea Society of Computer and Information
• /
• v.11 no.6 s.44
• /
• pp.165-174
• /
• 2006

This paper attacked the unknown DoS which mixed a DoS attack, Worm and the Trojan horse which used IP Source Address Spoofing and Smurf through the SYN Flooding way that UDP, ICMP, Echo, TCP Syn packet operated, the applications that used TCP/UDP in VoIP service networks. Define necessity of a Dynamic Update Engine for a prevention, and measure Miss traffic at RT statistics of inbound and outbound parts in case of designs of an engine at IPS regarding an Self-learning module and a statistical attack spread, and design a logic engine module. Three engines judge attack grades (Attack, Suspicious, Normal), and keep the most suitable filtering engine state through AND or OR algorithms at Footprint Lookup modules. A Real-Time Dynamic Engine and Filter updated protected VoIP service from DoS attacks, and strengthened Ubiquitous Security anger, and were turned out to be.

• Spatial Information Research
• /
• v.21 no.3
• /
• pp.11-19
• /
• 2013

Compared with traditional video monitoring systems that provide a video-recording function as a main service, an intelligent video monitoring system is capable of extracting/tracking objects and detecting events such as car accidents, traffic congestion, pedestrian detection, and so on. Thus, the object tracking is an essential function for various intelligent video monitoring and surveillance systems. In this paper, we propose a background and local histogram-based object tracking approach for intelligent video monitoring systems. For robust object tracking in a live situation, the result of optical flow and local histogram verification are combined with the result of background subtraction. In the proposed approach, local histogram verification allows the system to track target objects more reliably when the local histogram of LK position is not similar to the previous histogram. Experimental results are provided to show the proposed tracking algorithm is robust in object occlusion and scale change situation.

• Korean Journal of Optics and Photonics
• /
• v.5 no.3
• /
• pp.386-393
• /
• 1994

We have investigated output characteristics of XeCI excimer laser excited by transeverse electronbeam. We used e-beam output of 880 kV, 21 kA (70 ns, FWHM) and controlled current density of e-beam by pulsed magnetic coil (4.7 kG) which was fabricated around an e-beam diode (A-K gap is 21 mm) and laser chamber. We have obtained 35 J (4 atm) of e-beam deposition energy injected into laser media. The deposition energy was converted from an exposure area of Radcolor film and rising pressure of gas media which is measured by pressure jump method. The excited volume of $320cm^{3}$ was calculated. The maximum efficiency of 1.7% was obtained with the mixing ratio of HCllXe/Ar==0.2/ 6.3/93.5% and total pressure of 3 atm. Also laser output energy and specific energy were obtained 0.52 J and 1.7 J/I, respectively. For the analysis of experimental results we have developed computer simulation code. From the good agreements with the results of experiment and simulation we could theoretically explain the XeCI* formation channel. relaxation channel, and absorption channel of 308 nm.308 nm.

• Research in Plant Disease
• /
• v.24 no.1
• /
• pp.59-65
• /
• 2018

Pyraclostrobin is a broad-spectrum fungicide that inhibits mitochondrial respiration. However, it may also induce systemic resistance effective against bacterial and viral diseases. In this study, we evaluated whether pyraclostrobin enhanced resistance against the bacterial spot pathogen, Xanthomonas euvesicatora on pepper (Capsicum annuum). Although pyraclostrobin alone did not suppressed the in vitro growth of X. euvesicatoria, disease severity in pepper was significantly lower by 69% after treatments with pyraclostrobin alone. A combination of pyraclostrobin with streptomycin reduced disease by over 90% that of the control plants. The preventive control of the pyraclostrobin against bacterial spot was required application 1-3 days before pathogen inoculation. Our findings suggest that the fungicide pyraclostrobin can be used with a chemical pesticide to control bacterial leaf spot diseases in pepper.

• Tunnel and Underground Space
• /
• v.8 no.3
• /
• pp.200-208
• /
• 1998

This research is intended to investigate the behavior of the jointed rock under various loading conditions: static or dynamic load. The distributed state concept (DSC) is based on the idea that the response of the joint can be related to and expressed as the response of the reference states : relative intact (RI) and fully adjusted (FA) states. In the DSC, an initially RI joint modifies continuously through a process of natural self-adjustment, and a part of it approaches the FA state at randomly disturbed locations in the joint areas. In this study, based on the DSC concept, RI state, FA state, and disturbance function (D) are defined for characterizing the behavior of rock joint. From the results of this research, it can be stated that DSC model is capable of capturing the physical behavior of jointed rock such as softening and hardening and considering the size of joint and roughness of joint surface.

• Korean Journal of Materials Research
• /
• v.9 no.2
• /
• pp.211-216
• /
• 1999

Corrosion behavior of austenitic stainless steels of SUS 316L and SUS304L in molten salt of LiCl and $LiCl/Li_2O$ has been investigated in the temperature range of $650~850^{\circ}C$. Corrosion products of SUS316L and 304L in hot molten salt consisted of two layers-an outer layer of Li(CrFe)$O_2$and an inner layer of$Cr_2O_3$. The corrosion layer was uniform in molten salt of LiCl, but the intergranular corrosion occurred in addition to the uniform corrosion in mixed molten salt of LiCl/$Li_2O$. The corrosion rate increased slowly with the increase of temperature up to $750^{\circ}C$, but above $750^{\circ}C$ rapid increase in corrosion rate observed. SUS316L stainless steel showed slower corrosion rate than SUS 304L, exhibiting higher corrosion resistance in the molten salt.

• Journal of the Korea Concrete Institute
• /
• v.15 no.2
• /
• pp.297-304
• /
• 2003

This paper presents the test results of RCS(Reinforced Concrete Steel) beam-column joint with various types of transverse reinforcements such as small-column-type transverse reinforcements, four-piece ㄱ-shape assembled hoops and four-piece ㄱ-shape welded hoops. Five interior beam-column joint specimens were tested to examine the seismic performance and the shear strengths. From the test results, it was found that all the specimens sustained their strength at large levels of story drift(${\theta}$=0.035) without significant loss of strength and stiffness. Therefore it was concluded that the seismic performance and shear strength of the proposed RCS joint are at least the same as those of the specimen with conventional reinforcing details. Also, the contribution of the outer panel to the shear strength of the joint should be evaluated by the compression strut mechanism rather than compression field mechanism.

• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2003.10a
• /
• pp.151-151
• /
• 2003

토양에 방치된 농업용 폐비닐은 거의 분해가 되지 않으며, 수분과 공기의 유통을 차단하고 토양 내 미생물들의 흐름을 막아 토양을 더욱 황폐화시키게 된다. 불법적인 소각 때는 산불의 위험에다 다이옥신, 염소 및 염화수소가스 등을 배출해 대기오염을 유발시킨다. 폐비닐을 열분해과정으로 처리하여 아주 작은 입자로 미분쇄하고 겔상태로 용융된 원료물질속으로 완전히 균일하게 혼합하여 골재로 활용하는 과정에서 가스상과 액상의 여러 가지 중간생성물질이 발생하게 되며, 농약의 살포에 의한 잔류농약 둥 인체에 유해가능한 요소들이 있을 수 있다. 본 연구에서는 개발공정이나 제품에서 인체에 영향을 미칠 수 있는 물질에 대하여 유해성을 평가하고 용응 겔 및 가스와 오일에 함유된 화학성분을 분석하였기에 보고하고자 한다 시험동물의 혈액생화학적 검사에서는 농업용 폐비닐물질 및 열분해 파생물질의 혈청 Cholesterol, 혈청 Alanine aminotranseferse와 Aspartate aminotransferse, Albumin 수치, LDH, Glucose, Uric acid, A/C 비 등의 생화학적 활성도를 측정한 결과들에서는 농업용 폐비닐물질을 투여한 시험군에서 나타난 결과와 비교하여 열분해 파생물질을 투여한 시험군에서 나타난 결과가 감소된 통계결과를 보였다. 이 결과들은 농업용 폐비닐물질을 투여한 시험군보다 열분해 파생물질을 투여한 시험군의 외부독성물질 투여에 의한 생체독성의 영향과 생체에 가해진 스트레스강도가 작았음을 의미하는 것이다. 잔류농약분석에서는 시료로부터 농약을 추출하는 용매추출과정, 시료추출물 중 공존하는 방해성분을 제거하는 정제과정, 폐비닐물질 및 열분해 파생물질 성분을 100mg/kg 이상군의 투여 후 시험동물의 부검시 모든 투여군에서 독성소견이 인정되지 않았다. 이와 같은 결과로 열분해 및 연소과정에서 발생하는 파생물질의 분석결과를 응용하여 대기오염을 방지하고 인체 유해물질을 차단하는 공해 방지 설계의 기초자료를 제안하고자 한다.